mtimm

Member Since: May 18, 2005

User Badges:
  • Cisco Employee,

English
mtimm commented on REST API : how to specify Domain in the Login data in Application Centric Infrastructure 2 weeks ago

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x... aaaLogin—Sent as a...

mtimm commented on APIC REST API produces inconsistent response in Application Centric Infrastructure 1 year ago

:) I wouldn't say it was necessarily quick - you asked your first question 4 months ago.  The truth...

mtimm commented on APIC REST API produces inconsistent response in Application Centric Infrastructure 1 year ago

Since you are using python to POST this JSON, are you sorting the keys of the JSON?  If not you...

mtimm commented on Cisco Application Centric Infrastructure Simulator Installation in Application Centric Infrastructure 1 year ago

There is an ACI simulator ova for internal and partner use that can be installed in a virtualized...

mtimm commented on ACI Lab in Application Centric Infrastructure 1 year ago

Assuming you mean the simulator ISO available on Cisco.com, the simulator software is keyed to only...

mtimm commented on Renaming of objects in ACI in Application Centric Infrastructure 1 year ago

For this reason the alias and tag options were provided.  The only refrence to these options that...

mtimm commented on TIP OF THE DAY: How to erase a LEAF \ SPINE configuration and restore to factory defaults in Application Centric Infrastructure 1 year ago

Yes this is normal, it allows you to erase the ACI policy config but continue to access the node...

mtimm commented on APIC password recovery in Application Centric Infrastructure 1 year ago

What version of code is running on the APICs?  In early code the setup utility would not tell you...

mtimm commented on Cisco ACI Simulator in a VM ? in Application Centric Infrastructure 1 year ago

Even if you get this to install, it will not come up properly.  The software is written to check...

mtimm commented on APIC APIs in Application Centric Infrastructure 1 year ago

For your first example: <fabricRsOosPath>          <attributes>             <tDn>...

mtimm commented on Spine & Leaf is must for N9K w/ ACI Mode? in Application Centric Infrastructure 1 year ago

ACI is built on a leaf/spine architecture.Mike

mtimm commented on Spine & Leaf is must for N9K w/ ACI Mode? in Application Centric Infrastructure 1 year ago

VPC is supported in ACI from the leafs to hosts and other endpoints.Mike  

mtimm commented on Received fatal alert: handshake_failure in Application Centric Infrastructure 1 year ago

In 1.1(2h) the supported cipher list for SSL has been greatly reduced.  UCSD is greatly behind the...

mtimm commented on Version 1.0(2h) APIC warning in Application Centric Infrastructure 1 year ago

But it's a lab kit so the health score should be less of a concern.  If you want to get rid of it,...

mtimm commented on Version 1.0(2h) APIC warning in Application Centric Infrastructure 1 year ago

Hi Michel, This alert was added to make it abundantly clear that a single APIC fabric is not to be...

mtimm commented on Version 1.0(2h) APIC warning in Application Centric Infrastructure 1 year ago

The fact that we sell these lab kits was just one of the reason this warning was added.  When I...

mtimm commented on APIC REST API produces inconsistent response in Application Centric Infrastructure 1 year ago

Sorry I forgot to mention that the port number is what we call a naming property and all naming...

mtimm commented on APIC REST API produces inconsistent response in Application Centric Infrastructure 1 year ago

Hi Toan, Sorry I could not successfully downgrade to that version and the other system that is...

mtimm commented on APIC REST API produces inconsistent response in Application Centric Infrastructure 1 year ago

I can not recreate this with 1.0(3k).  I could downgrade one of my setup's to try and recreate it...

mtimm commented on How do you populate Port Name to display in APIC CLI in Application Centric Infrastructure 1 year ago

Which version of code are you running?  I think this may not have worked in very early versions of...

mtimm commented on APIC Cluster - Why minimum of 3 controllers? in Application Centric Infrastructure 2 years ago

In future code you may see a warning/alert in the GUI to the affect of: "Your Cluster contains less...

mtimm commented on where to get cobra library to import in aci python samples in Application Centric Infrastructure 2 years ago

There is great confusion just about everywhere I turn about APIC-EM and APIC-DC.  It is unlikely...

mtimm commented on where to get cobra library to import in aci python samples in Application Centric Infrastructure 2 years ago

Hello, APIC-EM does not use the cobra SDK.  The cobra SDK is for the APIC-DC. Mike

mtimm commented on Cisco Application Centric Infrastructure Simulator Installation in Application Centric Infrastructure 2 years ago

The simulator is not supported on C460 hardware.  It is only supported on the APIC-SIM-S product...

mtimm commented on REST API command reverse engineering in Application Centric Infrastructure 2 years ago

Hi Walter, To extend on what Leigh said, there are other options available as well.  Since you...

mtimm commented on Unable to log into APIC UI in Application Centric Infrastructure 2 years ago

Clustering can be done over the OOB management network to recover from certain failure scenarios...

mtimm commented on APIC Cluster - Why minimum of 3 controllers? in Application Centric Infrastructure 2 years ago

"with the cluster in this state it is unadvised to make changes in the GUI, i don't remember if its...

mtimm commented on ACI Simulator Installation in Application Centric Infrastructure 2 years ago

Hi Mateja,   I work for Cisco in our ACI solutions support team (TAC).  In the lab I have attempted...

mtimm commented on ACI Simulator Installation in Application Centric Infrastructure 2 years ago

Not just UCS hardware which could potentially mean many different products.  The requirement is the...

mtimm commented on ACI Simulator Installation in Application Centric Infrastructure 2 years ago

Hello, The ACI simulator is a hardware/software based product with it's own PID, i.e. you will not...

mtimm commented on ACI spine interface disabled in Application Centric Infrastructure 2 years ago

Do you have out-of-band access to the spine?  If so you can use a local task to bring the interface...

mtimm commented on Cisco Application Centric Infrastructure Simulator Installation in Application Centric Infrastructure 2 years ago

No, the simulator has a specific PID that is programmed into the appliance in manufacturing.  Even...

mtimm commented on Nexus 9000 Standalone (NXOS) to ACI Conversion (and back!) in Application Centric Infrastructure 2 years ago

Hi Kris, I personally agree with you and will make the request again to only document what is...

mtimm commented on Nexus 9000 Standalone (NXOS) to ACI Conversion (and back!) in Application Centric Infrastructure 2 years ago

Hi Kris, it it is probably best if you open a TAC case so we can help you more quickly. at this...

mtimm commented on Ask the Expert: Application Centric Infrastructure with Daniel Pita in Application Centric Infrastructure 2 years ago

Hi Brian, I believe Daniel is out on vacation so I'm responding for him.It appears your leafs are...

mtimm commented on where to get cobra library to import in aci python samples in Application Centric Infrastructure 2 years ago

To clarify, the 1.0(2*) versions do include the eggs on the apic but if you download them from that...

mtimm commented on Nexus 9000 Standalone (NXOS) to ACI Conversion (and back!) in Application Centric Infrastructure 2 years ago

If you go back to standalone mode you may want/need to also get the epld file and ensure that you...

mtimm commented on Nexus 9000 Standalone (NXOS) to ACI Conversion (and back!) in Application Centric Infrastructure 2 years ago

Certs may need to be installed on hardware shipped before May 2014.  Hardware shipped after this...

mtimm commented on Cisco EEM Best Practices in EEM Scripting 3 years ago

Thanks.  I only started the document on support forums.  The majority of the info, original...

mtimm commented on Debugging output blocking script execution in EEM Scripting 3 years ago

Hi Dale,This is really old code.  This is caused by CSCsg01644.  You can workaround it by setting:...

mtimm commented on Will UCS Manager be dumping Java? in Unified Computing 3 years ago

The obvious answer is HTML5.  See CSCul66288 for example, internally the decision hasn't been made...

mtimm commented on languages for SDN in EEM Scripting 3 years ago

Java, Python and C.

mtimm commented on ECC error causes ESXi to hang in Unified Computing 3 years ago

Hi Steven,While this is odd, when I was going through the data from your system I did not see any...

mtimm commented on ECC error causes ESXi to hang in Unified Computing 3 years ago

Hi Steven,My advice would be to have not let the TAC engineer close it.  I would not consider that...

mtimm commented on ECC error causes ESXi to hang in Unified Computing 3 years ago

Hi Steven,Yes there is a voltage regulator issue on the B200-M3 that can cause this.  I would...

mtimm commented on Script Active Even Though Unregistered in EEM Scripting 3 years ago

Hi Carlton,I'm sorry, what version of code is this?  This should not be possible in the latest...

mtimm commented on EEM script causing router to reload in EEM Scripting 3 years ago

Hi Ryan,Yes that's the workaround to this bug.  Add instead of increment.Mike

mtimm commented on Mandatory EEM Policy prefix in EEM Scripting 3 years ago

Hi Sotiris,The automatic registration of mandatory policies is only for policies included with the...

mtimm commented on New to scripting on Cisco devices – need direction in EEM Scripting 3 years ago

For NX-OS, python scripting is available on N5K and N6K platforms today as well (it had to be to...

mtimm commented on EEM smtp maxrun - System received a Bus Error exception in EEM Scripting 3 years ago

You will need to open a TAC case for this.  The image you are running supports a feature called...

Bio

User Badges:
  • Badge.
    Cisco Employee

mtimm's Stats

Points269
Discussion started 0
Answers marked as Correct 24
Endorsed 4
Content Rated 1