Nick Lichatz

Member Since: Jan 09, 2012

English
Nick Lichatz commented on Type-B SIP phone delay after pressing "Dial" in IP Telephony 5 months ago

https://supportforums.cisco.com/document/87236/working-concept-sccp-sip-... Type B SIP...

Nick Lichatz commented on Videoconferencing with Cisco webex meeting center and MX300 G2 endpoint in Video Over IP 5 months ago

you can also use the recently cisco acquired Acano solution, keep everything on prem and have...

Nick Lichatz commented on FAC submit Soft Key in IP Telephony 5 months ago

there are only 2 things to do here, press # or adjust your T.302 timer so that interdigit timeout...

Nick Lichatz commented on Cisco CUCM & Expressway SSL Certs in Unified Communications Applications 1 year ago

A good way to do this is use wildcard certs.  You use one cert for the entire domain instead of one...

Nick Lichatz commented on MRA - Phone only in Jabber Clients 1 year ago

 Like Jaime said , yes you can wait.  Any reason you would want to wait?  CUP server is most likely...

Nick Lichatz commented on CWMS roadmap for VCS/Codian integration in Conferencing 1 year ago

Im just passing on information from customers.  This is a need because the systems are not unified...

Nick Lichatz commented on Phone not registering to SRST GW..works on CUCM..Could it be ITL/CTL issue in IP Telephony 3 years ago

Create an access list that will block port 2000 from the phone to the cucm and the phone will try...

Nick Lichatz commented on Phone not registering to SRST GW..works on CUCM..Could it be ITL/CTL issue in IP Telephony 3 years ago

Thats correct. The phone will have a third or standby call manager in the unified configuration on...

Nick Lichatz commented on PVDM2-24DM Help in IP Telephony 4 years ago

Belay my last post then!Thanks for the info, time to do some reading!

Nick Lichatz commented on PVDM2-24DM Help in IP Telephony 4 years ago

PVDMs work with IOS 12 or 15, pick the IOS you want to run and go with it. IOS 15 has more features...

Nick Lichatz commented on Problem with voip call between two sites in IP Telephony 4 years ago

If all devices are SIP then you should have this on your dial peerssession protocol sipv2 dtmf-...

Nick Lichatz commented on DSPFARM command on 2801 in IP Telephony 4 years ago

You cannot have a VWIC in slot 0 of a 2801, put the T1 card in slot 1, try again and it will work. 

Nick Lichatz commented on CUCM 7.1.5 Publisher Hardware replacement in IP Telephony 4 years ago

Why dont you just have the new pub ready to go before you put it on the network?  Create a Vlan on...

Nick Lichatz commented on C40 IP address not registering in TelePresence 4 years ago

Are you using SIP or H.323 to register and what device are you registering to, VCS?Did someone...

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

Im not sure I understand your statement that G.729 " it has to restart and looses more information...

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

If your not running the lower bandwidth codec I would configure this to use G.729 if possible to...

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

Arg, I was wrong to suspect the provider not being congested, Im glad you found the problem!!!!

Nick Lichatz commented on IP Communicator traffic classification in IP Telephony 4 years ago

where are you running service policies in the network? 

Nick Lichatz commented on Voice mail server is unavailable in IP Telephony 4 years ago

need a bit more info- is this view mail or are you just using the VM profile for the message key -...

Nick Lichatz commented on IP Communicator traffic classification in IP Telephony 4 years ago

In regards to the verify QOS:do a sh service-policy xxx on the switch, it will show you the packet...

Nick Lichatz commented on CUBE + SBC dtmf fail in IP Telephony 4 years ago

you are most likley trying to use OOB DTMF and your trunk is using inband??what dtmf are you using...

Nick Lichatz commented on Unassigned Dn showing in Suscriber server in IP Telephony 4 years ago

I would like to know what the original post is affecting in your enviroment. 

Nick Lichatz commented on Unassigned Dn showing in Suscriber server in IP Telephony 4 years ago

Utils ntp statusUtils dbreplication statusSorry for the pre coffee post! I would check to see what...

Nick Lichatz commented on Unassigned Dn showing in Suscriber server in IP Telephony 4 years ago

If you are showing this in the SUB and not the PUB, I would look into if your database is...

Nick Lichatz commented on Uh oh - Cisco IP Communicator no-go in Mac Parallels Win7 in IP Telephony 4 years ago

Run VMware fusion, sound has always worked

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

If the provider is not honiring the markings , that may not be an issue unless the provider is also...

Nick Lichatz commented on User cannot hear the other party in IP Telephony 4 years ago

Most always this is due to Async routing.  See it all the time!  But if not, are you using MGCP or...

Nick Lichatz commented on 7937g conf phone randomly dialing an extension, no user intervention in IP Telephony 4 years ago

I would upload and select the older firmware by selecting the load in CUCM in device defaults. Then...

Nick Lichatz commented on Unable to login CUCM admin in IP Telephony 4 years ago

Can you login via SSH to the platform? Is this symptom the same on the both the pub and the sub? if...

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

Ah Miss read yor original post a bit, you have a data T1 and voice is all IP over that, got it.  If...

Nick Lichatz commented on CUCM 8.5 - CUBE - Avaya IP Office 406 using SIP in Other Collaboration, Voice, and Video Subjects 4 years ago

I had the same issue with a sip trunk and had to configure mid call invites within a sip profile...

Nick Lichatz commented on Call Setup/Quality Issues in IP Telephony 4 years ago

You might want to verify that you dont have slips on your t1 by doing a show cont t1 x/x/x , if...

Nick Lichatz commented on Tanberg VCS not displaying calling name in Video Over IP 4 years ago

Do the endpoints have the information in the correct fields. ( h.323 id). With sip , the uri should...

Nick Lichatz commented on Video Conference(H323) Disconnects often when passes through ASA in Video Over IP 4 years ago

I would not suspect your asa. Usually the call would not connect or fail to negotiate codecs if its...

Nick Lichatz commented on Device License Unit (DLU) showing negative number in CUCM 7.0.2 in IP Telephony 4 years ago

I would assume that your call manager in the lab has demo licenses  installed. I would also assume...

Nick Lichatz commented on Device License Unit (DLU) showing negative number in CUCM 7.0.2 in IP Telephony 4 years ago

Do you have a feature license installed? Was this an upgrade from a previous version of call...

Nick Lichatz commented on Tandberg VC units and PRI lines? in Video Over IP 4 years ago

As pri lines are a proven technology. SIP can add external calling to other organazations that...

Nick Lichatz commented on basic voip setup in Video Over IP 4 years ago

cme has some good features and can be cheap enough and still scale to meet your needs. With the...

Nick Lichatz commented on how to show calling ID while using single number reach in IP Telephony 4 years ago

Im not sure by reading your post if you are having incoming or outgoing CLID issues. Incoming CLID...

Bio












Nick Lichatz's Stats

Points25
Discussion started 1
Answers marked as Correct 3
Endorsed 0
Content Rated 0
Website: