N.ima0102@gmail.com

Member Since: Mar 31, 2012

English
N.ima0102@gmail.com commented on load-balance MPLS traffic on ether channel based on src-dst-ip on 3750 in LAN, Switching and Routing 4 years ago

HiUnfortunately 2960 and 2750 and many other switches from cisco can not load balance MPLS packet...

N.ima0102@gmail.com commented on After Cisco Device is boot,execute some command on CLI in EEM Scripting 4 years ago

I have created one discussion on https://supportforums.cisco.com/message/3657995#3657995 and...

N.ima0102@gmail.com commented on After Cisco Device is boot,execute some command on CLI in EEM Scripting 4 years ago

HiI have added "wait 10" after every command.unfortunately my script is run until before second "...

N.ima0102@gmail.com commented on After Cisco Device is boot,execute some command on CLI in EEM Scripting 4 years ago

HiThanks for your replyI have write my own EEM script.and it's work.but I want to create "delay"...

N.ima0102@gmail.com commented on EEM Support in cbs31x0-universal-mz.122-52.SE on 3110x in EEM Scripting 4 years ago

Thanks a lot for your reply.I have downloaded 12.2(55)SE from IBM officiall web site.and loaded...

N.ima0102@gmail.com commented on EEM Support in cbs31x0-universal-mz.122-52.SE on 3110x in EEM Scripting 4 years ago

Hi againI think related commands for "event manager" are not included in my version.according to...

N.ima0102@gmail.com commented on Pagp Problem and Loop packet in WAN, Routing and Switching 4 years ago

ThanksI think this problem is "bug". So I want to write some script in EEM for "up" interfaces...

N.ima0102@gmail.com commented on After Cisco Device is boot,execute some command on CLI in EEM Scripting 4 years ago

Thanks a lot for your attentionBecause 3110 is robust in switch family with 10G interface,So I...

N.ima0102@gmail.com commented on After Cisco Device is boot,execute some command on CLI in EEM Scripting 4 years ago

Thanks for your attention.Our devices are Cisco Catalyst 3110x for IBM Blade-HT.May you guide me...

N.ima0102@gmail.com commented on Catalyst 3110, fastethernet0 change vlan in WAN, Routing and Switching 4 years ago

HiApparently FastEthernet0 can not be chenaged.because this port is only management from AMM IBM.

N.ima0102@gmail.com commented on Pagp Problem and Loop packet in WAN, Routing and Switching 4 years ago

HiUnfortunately this problem is not solved.Is there any solution that I set one cron or schedule in...

N.ima0102@gmail.com commented on BPDU packets in LAN, Switching and Routing 4 years ago

Thanks for your reply.So,if one link is disconnected or connected,what is happened for switches of...

N.ima0102@gmail.com commented on BPDU packets in LAN, Switching and Routing 4 years ago

Hi againThanks a lot for your nice reply.I have some misunderstanding about STP and BPDU:1- Does...

N.ima0102@gmail.com commented on BPDU packets in LAN, Switching and Routing 4 years ago

Hidominic.caron and soroushm thanks a lot for your attention.I have some mis-conception about BPDU....

N.ima0102@gmail.com commented on Pagp Problem and Loop packet in WAN, Routing and Switching 4 years ago

Hi againI forgot another problem in configuration, if I set pagp related command "channel-group 1...

N.ima0102@gmail.com commented on Pagp Problem and Loop packet in WAN, Routing and Switching 4 years ago

Thanks for your attentionOutput of "show run" :-Interface port-Channel1Switchport access vlan...

N.ima0102@gmail.com commented on Difference Etherchannel Layer2 & Layer3 in WAN, Routing and Switching 4 years ago

Thanks a lot for your attention.May you give one example for usage of L3 and L2?I want to know...

N.ima0102@gmail.com commented on Syslog Server in WAN, Routing and Switching 4 years ago

Thanks for your attention.For enterprise network which syslog server do you suggest?Thanks in...

N.ima0102@gmail.com commented on Switch 3750 in WAN, Routing and Switching 4 years ago

Thanks a lot for your quick replyWhat differences are between 3750 and 3560 ?may you give me...

N.ima0102@gmail.com commented on Cisco monitoring solution in Network Management 4 years ago

HiThanks for your reply.But I want cisco monitorinig solution not from other brands.it's mean...

Bio












N.ima0102@gmail.com's Stats

Points14
Discussion started 22
Answers marked as Correct 0
Endorsed 0
Content Rated 12