nseto

Member Since: Oct 19, 2006

English
nseto's Activity on Cisco Support Community
Currently displaying 50 results

nseto has commented on SPA3102 dial delay

1 year 6 months ago
If it's 3 secs, the default for the parameter 'interdigit short timer' is 3. ...

nseto has commented on spa112 - cannot answer inbound calls

1 year 6 months ago
You'll need to run a debug log to see what the unit is sending.  Normally in...

nseto has commented on SPA504G Setting Access Limitation

1 year 6 months ago
Please refer to https://supportforums.cisco.com/thread/2086148I believe that is...

nseto has commented on spa112 - cannot answer inbound calls

1 year 6 months ago
Sounds like a NAT issue. You can verify by running debug log. Config for...

nseto has commented on Version-style conditional expressions broken on XU image.

1 year 6 months ago
Thanks, I've logged this for dev to resolve.  Bug ID is CSCuj33644.

nseto has commented on Post request for spa 525g2

1 year 6 months ago
nseto at cisco.comlog file info https://supportforums.cisco.com/docs/DOC-...

nseto has commented on Maximum SAS sessions on the Cisco ATA112

1 year 6 months ago
I received confirmation from development that 4 is the max.

nseto has commented on Unstable SPA50x with 7.5.4 firmware, remote reset to factory default

1 year 6 months ago
There's no factory reset that can be done remotely.  I inquired with dev and...

nseto has commented on Post request for spa 525g2

1 year 6 months ago
Is this with the latest sw release?  If so, please email me the config file (...

nseto has commented on SPA508G firmware not taking

1 year 7 months ago
Sounds like the phone is being re-provisioned then.What's in the profile rule...

nseto has commented on SPA508G firmware not taking

1 year 7 months ago
You have spcp call control in your network and the phone detects that.So go...

nseto has commented on Cisco spa3xx & spa 5xx

1 year 7 months ago
The transfer requires pressing the transfer softkey again.  Hangup doesn't...

nseto has commented on SPA508G firmware not taking

1 year 7 months ago
Change call control by going into phone menu, under setup/call control and...

nseto has commented on SPA502G cuts off after 15min on loudspeaker

1 year 7 months ago
The link mentioned contained links to the devices.Pasted here for the phones....

nseto has commented on SPA502G cuts off after 15min on loudspeaker

1 year 7 months ago
See what the debug log shows.  Config info at https://supportforums.cisco.com/...

nseto has commented on SPA122 with extra digit in DTMF buffer

1 year 7 months ago
Dev is asking for the voice syslog.https://supportforums.cisco.com/docs/DOC-...

nseto has commented on SPA122 with extra digit in DTMF buffer

1 year 7 months ago
I've forwarded the info to the developer.  Let me know if entering the numbers...

nseto has commented on SPA122 with extra digit in DTMF buffer

1 year 7 months ago
See if you can capture more with syslog and debug turned on.https://...

nseto has commented on SPA112 - Firmware 1.3.2(014) no longer logs

1 year 7 months ago
This issue has been addressed for the upcoming 1.3.3 release. Thank you.

nseto has commented on 525g Video Monitoring

1 year 7 months ago
Only the Cisco 2300 is supported.

nseto has commented on n00b: dial plans and tones for Ireland (SPA112)

1 year 7 months ago
For tones, you can look at http://www.3amsystems.com/wireline/tone-search....

nseto has commented on SPA504G won't Upgrade or Downgrade from Version 7.5.2

1 year 7 months ago
Obtain the debug log so that you can see why the unit is failing to change...

nseto has commented on SPA504G won't Upgrade or Downgrade from Version 7.5.2

1 year 7 months ago
Check in the Provisioning tab to see if Upgrade Enable is set to yes.

nseto has commented on Continuously rebooting after upgrade to 7.5.1.a

1 year 8 months ago
I was able to reproduce using Haiver's info.  And I placed a bug report for...

nseto has commented on SPA122 with extra digit in DTMF buffer

1 year 8 months ago
We haven't seen this, but if you see this again, we'd like to know about it. ...

nseto has commented on SPA112 reinvites to T.38 on voice calls.

1 year 8 months ago
Can you try the latest 1.3.2 from cisco.com?The log shows 1.3.1(003)If still a...

nseto has commented on Using speed dial button as paging on provisioned 525g's

1 year 8 months ago
Oops, I didn't see "internal" aspect.To direct dial, you'd have to do what you...

nseto has commented on Cisco SPA IP Phones 525G2 showing wrong caller name

1 year 8 months ago
Try the following.1. have the latest sw installed which is now 7.5.5.2. if...

nseto has commented on Using speed dial button as paging on provisioned 525g's

1 year 8 months ago
put in the dial plan

nseto has commented on Import personal directory Cisco SPA504G

1 year 8 months ago
There's a 3rd party that's doing this.http://www.tachytelic.net/2010/05/simple-...

nseto has commented on SPA122 is not registering after incoming call

1 year 8 months ago
The latest sw version is 1.3.2.Please try that, located at http://software....

nseto has commented on spa504g automatic redial

1 year 8 months ago
Not sure what you mean by auto redial, we do have redial softkey by default...

nseto has commented on Novice Voice Gateway User SPA8800 to SPA8800 Setup

1 year 8 months ago
You can refer to this link which describes SPA3000.http://www.provu.co.uk/pdf/...

nseto has commented on SPA 2102 config question

1 year 8 months ago
The SPA2102 has 2 voice ports, 1 account per port is supported.

nseto has commented on SPA525G2 fw 7.5.4: Booting loop on missing slash in Dictionary_Server_Script parameter

1 year 9 months ago
Thanks Dan, I've entered this as an issue to fix.  ID is CSCuh71163.

nseto has commented on SPA 303 Phone Admin Panel Settings

1 year 9 months ago
Go into the web UI as admin/advanced.SIP Port in the Ext tab.SIP TCP Port Min...

nseto has commented on Do they ATA's have a built-in fail save - reboot feature

1 year 9 months ago
No, this doesn't exist.  I'll have the marketing mgr look at your comment.

nseto has commented on Upgrading SPA232D to 1.3.2

1 year 9 months ago
I've obtained a release version of that and posted to http://www.sipura.net/...

nseto has commented on Upgrading SPA232D to 1.3.2

1 year 9 months ago
The fix is to install the same firmware twice.For the 2nd download, you'll need...

nseto has commented on SPA112 character issue in password field

1 year 9 months ago
Dev has given me the following info.---The SIP registration password can have a...

nseto has commented on SPA504G not booting?

1 year 9 months ago
Sounds like the software isn't booting all the way.Please contact support via...

nseto has commented on SPA 122 stops working with both PHONE 1 and 2 lights flashing

1 year 9 months ago
Please update to 1.3.2(014) and see if this resolves the issue.http://software....

nseto has commented on SPA112 Outbound DTMF Problem

1 year 9 months ago
You can change the default setting of Strict for DTMF Tx Mode, change it to...

nseto has commented on Calls randomly dropped with BYE on SPA525G2 + 500S phones running 7.5.4. Please help!

1 year 9 months ago
There's a NOTIFY that comes to the phone with the same Call ID as the BYE.   ...

nseto has commented on SPA3102 VOIP Router randomly resetting

1 year 9 months ago
You'll want to turn on the debug log to see what the reboot reason is.Details...

nseto has commented on SPA 303 Conference Calling Issues

1 year 9 months ago
Hi, you'll want to ask the UC320 community discussion since the UC is handling...

nseto has commented on SPA509G - Arrange Shared FXO Extensions

1 year 9 months ago
You can move the config.  Log into the phone via the web browser, as admin/...

nseto has commented on SPA 303 extension

1 year 9 months ago
If you are looking to add extensions, you'll want to look at using the UC320 (...

nseto has commented on SPA504G and EdgeMarc 4550

1 year 9 months ago
Since your option 66 is already giving out http://{$http_server_hostname}/{$...

nseto has commented on SPA302D Caller ID and Headset Port

1 year 9 months ago
Generate a debug log for the caller ID issue, so we can see what the SIP Invite...

Bio












nseto's Stats

Points478
Discussion started 0
Answers marked as Correct 55
Endorsed 1
Content Rated 0