oamarneh

Member Since: Apr 23, 2011

User Badges:
  • Cisco Employee,

English
oamarneh commented on Windows 8 on Lenovo Tablet 2 Cisco VPN Client Error 440 in VPN 4 years ago

Hello Fredy,great it is working fine with you now. however, please note that this is still a non...

oamarneh commented on Windows 8 installation of VPN Client Software (x86 64-bit version) results in "Icon09DB8A851.exe" on startup task in VPN 4 years ago

Cisco IPSec VPN Client is not supported on Windows 8, it has never been tested on Windows 8 and it...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

Hello Paul,thanks for the email. you can send the debugs to my email address [email protected]...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

line protocol down on tunnel interface with SVTI means that the IPSec tunnel went down. have you...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

Hello Paul,as it is an SVTI tunnel, here is the action plan for now:- collect 'debug crypto isakmp...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

Hello Paul,since you have the command "tunnel mode ipsec ipv4", this is no longer a GRE tunnel,...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

thanks for your eamil Paul, you also didnt mention that Tunnel interface is involved with this VPN...

oamarneh commented on CISCO ASA IPSEC VPN with Certificates in VPN 4 years ago

also plz remove the tunnel-group-map commands you added along with the SSL commands

oamarneh commented on CISCO ASA IPSEC VPN with Certificates in VPN 4 years ago

Hello Nouraj,you dont need all these SSL commands, as here we are doing an IPSec L2L tunnel, and...

oamarneh commented on VPN Tunnel Failure on 3945 Routers Running 152-4.M1 in VPN 4 years ago

Hi Paul,so the tunnels are up, but suddenly they go down? when this happens, how do you recover...

oamarneh commented on In high availability Active-Active or Active-Passive is VPN supported in Firewalling 4 years ago

it is actually active/active...since 1 device is active for a certain group of contexts, and the...

oamarneh commented on In high availability Active-Active or Active-Passive is VPN supported in Firewalling 4 years ago

to simplify it, each context will act as a separate firewall, and for a certain failover group,...

oamarneh commented on In high availability Active-Active or Active-Passive is VPN supported in Firewalling 4 years ago

i am not sure i understood your question properly David.with active active failover, the ASA will...

oamarneh commented on In high availability Active-Active or Active-Passive is VPN supported in Firewalling 4 years ago

with active-standby setup, yes ALL vpn types are supported. however, with Active-Active, you must...

oamarneh commented on ASA 5512-X could support High availability Active/Active and Active/Passive in Firewalling 4 years ago

yes it does support both types of failover

oamarneh commented on Is there any way to configure domain name in place of IP address for "Peer VPN device" in VPN 4 years ago

Hello Mahendra,yes you can set a hostname in the 'crypto map set peer' command insetad of IP...

oamarneh commented on VPN users can't connect to a Site-To-Site branch office in VPN 4 years ago

yes you need to add that ACL entry to the crypto ACL of the remote ASA, so the ASA put this...

oamarneh commented on SHA1 Signature algorithm on FWSM in Firewalling 4 years ago

Hello Michal,i have tried in the LAB with version 4.0.1, and i got it as MD5 signature. i checked...

oamarneh commented on ASA 5505 Port Issue in Firewalling 4 years ago

please provide the config

oamarneh commented on ASA 5505 Port Issue in Firewalling 4 years ago

Hello Thomas,what are the sec level of these 2 interfaces? if they are the same, use the command...

oamarneh commented on VPN users can't connect to a Site-To-Site branch office in VPN 4 years ago

Hello Lee,make sure you add a line in the crypto ACL of the 2 ASAs of the L2L tunnel to allow...

oamarneh commented on equivalent command for "ip tacacs source-interface" on ASA in VPN 4 years ago

Hello Hemant,i think the interface name in the aaa-server command just specifies where the AAA...

oamarneh commented on Windows 8 on Lenovo Tablet 2 Cisco VPN Client Error 440 in VPN 4 years ago

Hello,confirming what Jouni mentioned, the Cisco IPSec VPN client is not supported on Windows 8,...

oamarneh commented on Cisco VPN client not working after migrating from PIX to ASA in VPN 4 years ago

Hello Kumar,what is the VPN client version you are using?was this working fine on windows server...

Bio

User Badges:
  • Badge.
    Cisco Employee

oamarneh's Stats

Points10
Discussion started 0
Answers marked as Correct 0
Endorsed 0
Content Rated 0