padramas

Member Since: Jan 25, 2007

English
padramas commented on Rack Server with two VIC 1225 , NIC redudancy in Unified Computing 1 day ago

yes, fabric failover feature is available in UCSM managed mode.  I shared the doc as I am not...

padramas commented on Rack Server with two VIC 1225 , NIC redudancy in Unified Computing 1 day ago

Hello, Is rack server with two VIC cards managed by UCSM ? To achieve both VIC and path redundancy...

padramas commented on Activation failed for B200 M4 7.0 board controller firmware with UCS Mini 3.0(2c) in Server Networking 1 year ago

Hello ,In addition, board controller firmware can be running at higher level than other blade...

padramas commented on FCoE Issue with UCS C220 M3/VIC 1225/Nexus 5548up in Unified Computing 1 year ago

Hello,You can update the settings of VIC card from CIMC  GUI. If you cannot, I would suggest you to...

padramas commented on Cisco UCS Management Pack Error in Unified Computing 1 year ago

Hello Florent,Can you please post your SCOM MP query in following discussion forum ?https://...

padramas commented on How to use the command display all serial number on cisco ucs server ? in Unified Computing 2 years ago

Hello,There are multiple ways to get the inventory report of all UCS servers ( XML API, powertool,...

padramas commented on Configuring Uplink behaviors via UCS Central? in Unified Computing 2 years ago

Hello Ryan,Your observation is correct. Currently UCS Central does not feature to configure FI...

padramas commented on vnic's gone from traffic monitoring session after UCS upgrade to 2.2(1d) in Unified Computing 2 years ago

Hello Paul,Thanks for the detailed information. What was the previous UCSM version ?Let us start...

padramas commented on vnic's gone from traffic monitoring session after UCS upgrade to 2.2(1d) in Unified Computing 2 years ago

Hello Paul,Can you please describe " traffic monitoring sessions  by vNIC ? If you have not done so...

padramas commented on Importing CIMC SSL Server Certificate using internal CA in Unified Computing 2 years ago

Hello All,Sorry for the lack of clarity. The fix for defect CSCun04933 also address the issue...

padramas commented on UCS LDAP and Native Authentication in Unified Computing 2 years ago

Hello, When you changed the native auth to LDAP and are using local account, are you prepending the...

padramas commented on Cisco UCS RAID SAS 2008M-8i Mezzanine Card Performance? in Unified Computing 2 years ago

Hello Reuben,I reached out to colleagues who are more knowledge on this topic and here is their...

padramas commented on UCS ARP ? issue in Unified Computing 2 years ago

Hello Could be due to CSCun19289    FI mgmt0 dropping traffic coming from blades behind that FI Are...

padramas commented on CIMC Secure Connection Failed in Firefox 27.0.1 works in IE 8.0 in Unified Computing 2 years ago

Hello Jason,We are currently investigating the issue via CSCun04933    CIMC Web GUI not working...

padramas commented on VIC1240 running out of buffers in Unified Computing 2 years ago

Hello Rob,Hope you are doing good. ENIC driver version  ?How many vNICs are configured on it ?We...

padramas commented on What value/text to be entered in the trusted point- certification chain space in Unified Computing 2 years ago

I assume you have valid cert signed off by your root CA.How many intermediate certs do you have ?...

padramas commented on vsan membership down on mapped FC uplink port in Unified Computing 2 years ago

Hello Danny,Yes it is cosmetic issue in UCSM 2.2.1the issue is tracked underhttps://tools.cisco.com...

padramas commented on What value/text to be entered in the trusted point- certification chain space in Unified Computing 2 years ago

Hello Shyam,You can enter all the certs in the trust chain  between third party signed cert for...

padramas commented on UCS 2.2 and Add Remote CD/DVD in Unified Computing 2 years ago

Hello Terry,UCSM 2.2 enhanced it's visibility into  boot devices and also supports second level...

padramas commented on FCoE Configuration Between two VIC Adapters on UCS Rack Server and Nexus 5500 Switch in Server Networking 2 years ago

Hello Vinayak,VIC 1225 is CNA that carries both Ethernet and FCoE over the same physical cable....

padramas commented on Cisco UCS RAID SAS 2008M-8i Mezzanine Card Performance? in Unified Computing 2 years ago

Hello Reuben,I have forwarded your queries to experts and we will get back to you by end of this...

padramas commented on Cisco UCS RAID SAS 2008M-8i Mezzanine Card Performance? in Unified Computing 2 years ago

Hello Reuben,2008 Mezz RAID controller does not have onboard cache and is low-end ( relative )...

padramas commented on Vlan tagging on VIC 1225 in Unified Computing 2 years ago

Hello Gregor,As you add secondset of  LACP team on VIC, it would bring down the whole LACP on the...

padramas commented on Vlan tagging on VIC 1225 in Unified Computing 2 years ago

Hello,ENIC driver for W2K8 does not support VLAN dot 1q feature. With W2K12, the native teaming...

padramas commented on N5K to EMC VNX5400 and N5K to FI6248 in Storage Networking 2 years ago

Hello Luis,I assume you are planning to implement following topology.FI <<--- FC or FCoE --...

padramas commented on FCoE Issue with UCS C220 M3/VIC 1225/Nexus 5548up in Unified Computing 2 years ago

Thanks for the update Just for your reference, example configuration is available here FCoE...

padramas commented on FCoE Issue with UCS C220 M3/VIC 1225/Nexus 5548up in Unified Computing 2 years ago

Hello,I assume you have N5K configured for vPC and the switch interfaces connecting to VIC are part...

padramas commented on Debian-based OS on a UCS M3 C22 in Server Networking 2 years ago

Hello,Currently, following combination is supported.Firmware 1.5.4 + Ubuntu 12.04.2 + C220M3/C240...

padramas commented on FCoE Multihop in Storage Networking 2 years ago

Hello Yedi,1) Yes, you need to use dedicated uplinks for FCoE when you are using vPC between FI and...

padramas commented on M3 C22 Embedded MegaRAID in Server Networking 2 years ago

Hello Benjamin,can you please confirm that south bridge is enabled in BIOS ?Enabling embedded RAID...

padramas commented on Fabric Interconnect spare partition space utilization in Unified Computing 2 years ago

On 6140, /spare is 4G partition used for system libraries. Can you please open a TAC service...

padramas commented on Fabric Interconnect spare partition space utilization in Unified Computing 2 years ago

FI hardware model ? can you please share the alert message regarding spare partition ?

padramas commented on Fabric Interconnect spare partition space utilization in Unified Computing 2 years ago

Hello Michael,UCSM version ?Can you please share the output of following commands connect local-...

padramas commented on UCSM QOS policy for vHBA? in Server Networking 2 years ago

Hello Roman,By default, UCS marks FCoE traffic with cos 3 and assigns to no-drop queue. No user...

padramas commented on Fabric Interconnect spare partition space utilization in Unified Computing 2 years ago

fwm_trace_file issue happens only on 2.1.1f version. It is created when you initiate UCSM...

padramas commented on UCS Connecting to two different storrage with two different SAN switch. in Unified Computing 2 years ago

Hello Toms.On a high level, we need to enable NPIV on Brocade and configure pin groups on UCS...

padramas commented on Host firmware package upgrade from 2.1(1b) -> 2.1(3a) APEI Generic Hardware Error in Unified Computing 2 years ago

Hello Daniel,We are investigating this issue via defect  CSCum24668Padma

padramas commented on Interop Matrix W2012 R2, C-Series C220-M3 UCSM managed in Unified Computing 2 years ago

Hello WalterFrom the PDF fileHardware and Software Interoperability for UCSM Managed Servers in...

padramas commented on UCS C Series hardware monitoring in Unified Computing 2 years ago

Hello Stefan,For CIMC 1.5, can you make sure have the latest MIB on your NMS system ?http://www....

padramas commented on UCS C-Series VIC-1225 to Nexus 5000 setup in Server Networking 2 years ago

Hello,Have you configured LACP on ESXi with the two vmnics ?==>>  channel-group 4 mode...

padramas commented on IOM connecting FI error - Fabric unsupported connection in Unified Computing 2 years ago

Hello,Please provide the following outputconnect nxos bshow fex show int fexshow run int eth 1/23...

padramas commented on UCS C-Series VIC-1225 to Nexus 5000 setup in Server Networking 2 years ago

Hello Herenco,You can have one of the following network connectivity for UCS rack server with...

padramas commented on C220 M3 FCOE and Netapp Fc via nk5 in Unified Computing 2 years ago

Hello,Can you please provide interface configuration of N5K switch ports that are connected to VIC...

padramas commented on C220 M3 FCOE and Netapp Fc via nk5 in Unified Computing 2 years ago

Hello Yoed,If I understood it correctly, you have installed ESXi on storage local to the server but...

padramas commented on VIC 1240 and SAN Troubleshooting in Unified Computing 2 years ago

Hello Terry,As mentioned in my earlier post, it is normal after OS boots up as HBA driver would...

padramas commented on IPMI Serial-over-LAN in Cisco C220 CIMC in Unified Computing 2 years ago

Hello,I assume you referring to SoL for host OS. As Marcin, pointed out, IPMI SoL is not available...

padramas commented on VIC 1240 and SAN Troubleshooting in Unified Computing 2 years ago

Hello Terry,When did you run this command on the VIC adaptor ?Are you booting from SAN or trying to...

padramas commented on Learn UCS Manager & Cisco Blade Servers in Unified Computing 2 years ago

Hello Vibhor,UCS platform emulator is great resource to learn and practice UCSM. https://developer....

padramas commented on Cannot install the Windows 2012 R2 on UCS C220 M3 servers in Unified Computing 2 years ago

Walter,Issue is resolved as per case notes by following standard procedure. Use megaSR driver...

padramas commented on newest java version, when using UCS 2.1.3a in Unified Computing 2 years ago

Hello,Avoid Java 7 update 45 . Please use Java 7 update 25 or lower. https://supportforums.cisco....

Bio












padramas's Stats

Points965
Discussion started 10
Answers marked as Correct 127
Endorsed 4
Content Rated 29