patelvc7601

Member Since: Sep 12, 2008

English
patelvc7601 commented on Cisco 5512-X Firepower Module Upgrade to 5.4 in FireSIGHT System / 3D System 11 months ago

Thanks Marvin you rock !Any training material ( apart from lab minutes) , that you can recommend...

patelvc7601 commented on ASA CX Upgrade in Firewalling 1 year ago

Thanks Marvin 

patelvc7601 commented on Java Error message with Webdeploy in VPN 2 years ago

for Cisco UCS  , I was able to go fix this by adding site list.Go the Control Panel >> Java...

patelvc7601 commented on Cisco 4900 IOS upgrade in LAN, Switching and Routing 4 years ago

Thanks for the quick response.

patelvc7601 commented on OSPF High Available Design in Borderless Networks 4 years ago

HiI see your point, Munawar. I think you should use OSPF b/w switches Unless your plan is to use...

patelvc7601 commented on C3750E & Interface Buffer Pools in LAN, Switching and Routing 4 years ago

hi I am seeing the similar issue.cpu utilization is very low. same symptom.

patelvc7601 commented on WAAS Placement & Egress method in Wide Area Application Services (WAAS) 4 years ago

Hi Gaurav,In another words, If I use GRE as egress method than WAE can be multiple hop away ....

patelvc7601 commented on WAAS Placement & Egress method in Wide Area Application Services (WAAS) 4 years ago

hi Gaurav I appreciate your response.I will try to put the topology in following line.L2 Access SW...

patelvc7601 commented on ACE Routed Mode vs One Arm Mode in Application Networking 4 years ago

Thank you all for sharing your experience.

patelvc7601 commented on Cisco Nexus 1000V Series Virtual Switch Module Placement in the Cisco Unified Computing System in Unified Computing 4 years ago

we are running vcenter on the hosts that has VSM. Only thing is we are using system vlan for...

patelvc7601 commented on Cisco 6509 IOS Upgrade where to start ?? in LAN, Switching and Routing 4 years ago

Thank you Rob, that did the trick. my curiosity about modular image ended ended up with some nice...

patelvc7601 commented on 4507R-E 10G uplink connectivity & Documentation ? in LAN, Switching and Routing 5 years ago

Rahul,Thank you for the link & hope others will help by this Design guide. Sincerely,Viral Patel

patelvc7601 commented on Qos on WAN Router & default class Offered rate in WAN, Routing and Switching 5 years ago

If Anybody have read this post, I wanted to point this out that all these drops turn out to be...

patelvc7601 commented on HWIC-4ESW Vs. HWIC-1FE in WAN, Routing and Switching 5 years ago

For One Instance that I encountered is using MQC on SVI will not work. Funny thing it may allow to...

patelvc7601 commented on Microsoft NLB with UCS & Upstream Nexus 7000 in Unified Computing 5 years ago

Hi Gary,I have peer-gateway enabled for my NAS Storage & this is not a issue at all here, I...

patelvc7601 commented on Microsoft NLB with UCS & Upstream Nexus 7000 in Unified Computing 5 years ago

Hi Mathew,thank you for the reference bug id . I have set NLB cluster mode with multicast ( there...

patelvc7601 commented on Qos on WAN Router & default class Offered rate in WAN, Routing and Switching 5 years ago

Once Again Thank you for your reply. I removed the shaping but I was still getting drops on View...

patelvc7601 commented on Qos on WAN Router & default class Offered rate in WAN, Routing and Switching 5 years ago

BTW, from what you described, and before getting to your specific  questions, although you're...

patelvc7601 commented on WAN MQC on 4port HWIC-4ESW in WAN, Routing and Switching 5 years ago

It turns out to be This module does not support This qos future.

patelvc7601 commented on Cisco 4507R-E Sup 6L-E Failover & Uplink Connectivity in LAN, Switching and Routing 5 years ago

Well, I have just one link currently working but would like to update on Question 1 . It was a...

patelvc7601 commented on Nexus 7010 Code upgrade 4.2.6 vs 5.x in Unified Computing 5 years ago

thank Alan ,Do you have any estimate time it took for EPLD ?

patelvc7601 commented on Multiple DMZ ASA help in Firewalling 6 years ago

I have currently this command applied to access-list dmz_inbound will apply to nameif interface dmz...

Bio












patelvc7601's Stats

Points0
Discussion started 19
Answers marked as Correct 0
Endorsed 0
Content Rated 10