Peter_sgc_2

Member Since: Nov 16, 2009

English
Peter_sgc_2's Activity on Cisco Support Community
Currently displaying 50 results

Peter_sgc_2 has commented on Adding a Dial Prepend....

3 months 2 weeks ago
Hey kkoeper12,That sounds easier... how would I do that.... ??

Peter_sgc_2 has commented on Adding a Dial Prepend....

3 months 2 weeks ago
Hey Terry, Thanks for that, I've take a look at the voice translation...

Peter_sgc_2 has created Adding a Dial Prepend....

3 months 2 weeks ago
Hello, We have a UC560 on CCME and our Carrier has enabled a CPS service...

Peter_sgc_2 has created Cisco 891 8Ports Layer 3?

3 months 3 weeks ago
Hello,We have a Cisco C891F-K9 [c800-universalk9-mz.SPA.153-3.M3.bin] <...

Peter_sgc_2 has commented on SG_300 VLAN Configuration

7 months 3 weeks ago
Do you have a link to the guide? The one I have Chap-14 is STP and the one...

Peter_sgc_2 has created SG_300 VLAN Configuration

7 months 3 weeks ago
Hello,I am setting up a network on some SG300 switches, I've used ...

Peter_sgc_2 has created additional ringtones for UC500

1 year 10 months ago
Hey, Is there a place where we can download more ringtones for the UC500 in raw...

Peter_sgc_2 has commented on Voice-mail Notification Stopped

1 year 10 months ago
Hey,Thanks for the information,I applied the latest SoftwarePack for the UC IOS...

Peter_sgc_2 has commented on Voice-mail Notification Stopped

1 year 10 months ago
Bump?!

Peter_sgc_2 has created Voice-mail Notification Stopped

1 year 11 months ago
Hello,Our Voice-mail email notification has stopped working.If I go into the...

Peter_sgc_2 has commented on 1131AG as a Bridge

1 year 11 months ago
Well, it's going to be connecting to a SOHO WIFI Point.Like a Linksys or Dlink...

Peter_sgc_2 has created 1131AG as a Bridge

1 year 11 months ago
Hello,Is it possible to use an 1131AG to bridge a non-cisco WLAN to wired...

Peter_sgc_2 has commented on Internal Ring?

2 years 1 month ago
I see.But no other easy way?

Peter_sgc_2 has created Internal Ring?

2 years 1 month ago
Hello,Is it possible to have the phones ring with a different ring tone for...

Peter_sgc_2 has created USB to Serial - Freeze!

2 years 1 month ago
Hey,Not really sure where to post this.But for years I have been using a USB to...

Peter_sgc_2 has created 4 Port BRI UC500

2 years 2 months ago
Will the 4 Port BRI HWIC work in the UC540?HWIC-4B-S/Thttp://www.cisco.com/en/...

Peter_sgc_2 has commented on AA Script Auto Transfer

2 years 3 months ago
Ah! That would be awesome!But I need "Additional Access" to download that We...

Peter_sgc_2 has commented on AA Script Auto Transfer

2 years 3 months ago
Thanks Daniel,I had a look at the WebGUI script editor but couldn't see any...

Peter_sgc_2 has created AA Script Auto Transfer

2 years 3 months ago
Hello,I need a AA script that will automatically transfer a caller to a set EXT...

Peter_sgc_2 has commented on 2nd Auto-Attendant

2 years 3 months ago
Fixed! Cheers!

Peter_sgc_2 has created 2nd Auto-Attendant

2 years 3 months ago
Hello,How do I Setup and Configure a second auto-attendant on a UC560?I have...

Peter_sgc_2 has commented on Cisco ATA 187 on UC560

2 years 4 months ago
Dam, the SPA8000 is a lot more then the SPA112

Peter_sgc_2 has commented on Cisco ATA 187 on UC560

2 years 4 months ago
Aha, So it's the case of Configuring it via the CCA?It would need to be a...

Peter_sgc_2 has commented on Cisco ATA 187 on UC560

2 years 4 months ago
So seeing as the ATA186 is end of life.Does the UC560 Suppot the "SPA112 2 Port...

Peter_sgc_2 has commented on Cisco ATA 187 on UC560

2 years 4 months ago
No one at Distrubution sells the ATA 186

Peter_sgc_2 has created Cisco ATA 187 on UC560

2 years 4 months ago
Hello,Is the Cisco ATA 187 supported on the UC560 ?

Peter_sgc_2 has commented on Left (Secondary) Antenna

2 years 6 months ago
Hmmm Ok,Starting to make Sense.So If you dont use "Diversity" mode the Left...

Peter_sgc_2 has commented on Left (Secondary) Antenna

2 years 6 months ago
Thanks for the information George, I will take a look as see what I can work...

Peter_sgc_2 has created Left (Secondary) Antenna

2 years 6 months ago
This is probally going to be a stupid question...But.How does the LEFT antenna...

Peter_sgc_2 has created External Call Ring

2 years 7 months ago
Reading through lots and lots of post about this I still can't figure out if...

Peter_sgc_2 has commented on SA500 BGP Routing..

2 years 8 months ago
Yup, 9 Months ago I relasied this.But thanks.@Juna Thats just a service type...

Peter_sgc_2 has created Cisco 500 Series 802.1x Requirements

2 years 9 months ago
Hello,Does anyone have a guide on how to setup 802.1x on the Cisco 500 Series...

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
Bump!

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
We are using F/W 2.1.71I'm not sure if this is a Firmware Issue, It could be...

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
Hi Thomas.I have disabled IPS on the SA, but we still have the same issue here...

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
Yes we are using IPSWhen I get back to the office I will try and disable this....

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
Hi Tom,We have set the SA to "Temporarily bypass URL requests" and "Web Threat...

Peter_sgc_2 has commented on SA500 ProtectLink URL Filterting

2 years 10 months ago
Bump!

Peter_sgc_2 has created SA500 ProtectLink URL Filterting

2 years 10 months ago
We have just enabled ProtectLink URL Filtering on our SA500..But now all HTTP...

Peter_sgc_2 has commented on SA500 NAT Routing LAN to WAN

2 years 10 months ago
Hi Thomas,We don't have Dual WAN, But we are using the "IP Aliases" Considering...

Peter_sgc_2 has created SA500 NAT Routing LAN to WAN

2 years 12 months ago
We have an SA500  with a NAT translation from an External IP to the Internal IP...

Peter_sgc_2 has created SR500 PPPoA CCA

2 years 12 months ago
Is it possible to setup the SR500 on ADSL on a PPPoA link via the CCA?I have...

Peter_sgc_2 has commented on SRP527w VPN Status Disconnect Button (FW:1.01.26 (003))

3 years 1 month ago
How strange ....It's now there ....

Peter_sgc_2 has commented on SRP527w VPN Status Disconnect Button (FW:1.01.26 (003))

3 years 1 month ago
Hi Andy,I looked there, but Unless I am going blind I can't find it.The last...

Peter_sgc_2 has commented on SRP527w VPN Status Disconnect Button (FW:1.01.26 (003))

3 years 1 month ago
Hi Andy,Thanks for that, are you able to post the release notes.The only ones I...

Peter_sgc_2 has commented on SRP527W Power LED Flashing

3 years 1 month ago
Yup.We have tried that.Is there no TFTP recovery?

Peter_sgc_2 has created SRP527w VPN Status Disconnect Button (FW:1.01.26 (003))

3 years 1 month ago
Hello,Where is the disconect button on the VPN Status page gone in FW:1.01.26 (...

Peter_sgc_2 has created SRP527W Power LED Flashing

3 years 1 month ago
Hello,I have a SRP527W what has a constantly flashing power LED.Is there...

Peter_sgc_2 has created Upgrade Firmware SPA500 / UC500

3 years 2 months ago
Hello,It is possible to upgrade the firmware on SPA500 Series phones when they...

Peter_sgc_2 has created HeadSets for SPA500 Series Phones

3 years 2 months ago
Hello,What recomendataions do people have when it comes to headsets for the SPA...

Bio










  • 30 Visits





  • 1000 Added









Peter_sgc_2's Stats

Points10
Discussion started 42
Answers marked as Correct 0
Endorsed 0
Content Rated 10