pompeychimes

Member Since: May 06, 2009

English
pompeychimes commented on gain access cisco 1801 in Network Infrastructure 2 years ago

I'd forget about SDM and try to console into the router with a console cable and terminal emulator.

pompeychimes commented on block ping in the same network via router in WAN, Routing and Switching 2 years ago

Are you asking if you can use policy routing instead of /30's? If so the answer is no. Per my...

pompeychimes commented on block ping in the same network via router in WAN, Routing and Switching 2 years ago

The problem is none of the traffic between devices on the same VLAN will traverse the router. Since...

pompeychimes commented on help with WIC-1DSU-T1v2 in 2620 in WAN, Routing and Switching 2 years ago

Sounds like you have a telco issue or if applicable an extended wiring issue. Have you called the...

pompeychimes commented on help with WIC-1DSU-T1v2 in 2620 in WAN, Routing and Switching 2 years ago

Configure the interface to use HDLC vs. PPP. Then insert the loopback plug. Assuming you got the...

pompeychimes commented on vlan not active in a domain, how can be changed it? in WAN, Routing and Switching 2 years ago

Looks like its forwarding from your output...Port          Vlans in spanning tree forwarding state...

pompeychimes commented on block ping in the same network via router in WAN, Routing and Switching 2 years ago

If your switch supports it I'd use PVLANs.

pompeychimes commented on help with WIC-1DSU-T1v2 in 2620 in WAN, Routing and Switching 2 years ago

Make a loopback plug and see if it comes up. Search google for instructions.

pompeychimes commented on Cisco Security Manager (CSM) in Security Management 2 years ago

Thanks for the info.

pompeychimes commented on Can't pull an IP address via DHCP in LAN, Switching and Routing 2 years ago

Thanks for your input.Portfast is configured globally. Just to be double certain I even configured...

pompeychimes commented on NAT for server in WAN, Routing and Switching 4 years ago

I'm asking if you can connect to 10.1.1.2:4510 from inside the LAN (Same subnet)? If so, just...

pompeychimes commented on NAT for server in WAN, Routing and Switching 4 years ago

So you can't even connect to 10.1.1.2:4510 from inside the LAN (Same subnet)?

pompeychimes commented on Method for detecting loops..... in Getting Started with LANs 4 years ago

Physically you can look at the switch LED's. They'll typically be flashing at the same time.On the...

pompeychimes commented on Migrating from ISA Server to ASA5510 in LAN, Switching and Routing 4 years ago

Sounds like you are describing a source NAT. If so it certainly can be done on an ASA.

pompeychimes commented on Problem with port-security and DHCP in LAN, Switching and Routing 4 years ago

Try turning port security off. Does the problem persist?

pompeychimes commented on NAT for server in WAN, Routing and Switching 4 years ago

So external requests for app.example.com are being resolved on your internal DNS servers?

pompeychimes commented on d* Route on show route (Cisco ASA) in WAN, Routing and Switching 4 years ago

Is it not the default route being received via DHCP on your WAN interface?

pompeychimes commented on NAT for server in WAN, Routing and Switching 4 years ago

The easiest way would be to create an internal dns record for app.example.com that points to 10.1.1...

pompeychimes commented on Bunch of cisco problems. in LAN, Switching and Routing 4 years ago

1) I assume you are consoled into the router and you are not seeing any output on your term...

pompeychimes commented on QoS help!!!! in WAN, Routing and Switching 4 years ago

Shouldn't the policy map be on your LAN interface?

pompeychimes commented on QoS help!!!! in WAN, Routing and Switching 4 years ago

Shouldn't your ACL on R2 be reversed. I believe you are listing your destination IP's as your...

pompeychimes commented on High CPU Utilization 2811 in WAN, Routing and Switching 4 years ago

http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf

pompeychimes commented on High CPU Utilization 2811 in WAN, Routing and Switching 4 years ago

Based on the graphs you supplied it dosen't appear that traffic load is your problem. 4.5 MB on a...

pompeychimes commented on Making 2 VLANs talk to 1 server in LAN, Switching and Routing 4 years ago

A specific route isn't necessary. If ip routing is enabled and both SVI's are on switch one then...

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

OK so you are in a holding pattern till you get the adapter. When you do lets hope the Router...

pompeychimes commented on Making 2 VLANs talk to 1 server in LAN, Switching and Routing 4 years ago

DFG = Default Gateway? CorrectSVI = Switched Virtual Interface ...

pompeychimes commented on Making 2 VLANs talk to 1 server in LAN, Switching and Routing 4 years ago

It looks like the DFG for VLAN 1 is the Router and the DFG for VLAN 2 is the Switch. I would move...

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

Good. At least we know the router will accept some input. Mind you this doesn't get us very far...

pompeychimes commented on Checkpoint address translations on ASA in VPN 4 years ago

I'm not getting it. I think you are looking to translate the source IP. If so its certainly...

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

OK I understand. If we want to continue down the telnet route do the following. I'm being very...

pompeychimes commented on WAN Assessment in WAN, Routing and Switching 4 years ago

Take a look at Solarwinds. They have 30 day trials for all of their software. The Engineers tool...

pompeychimes commented on Making 2 VLANs talk to 1 server in LAN, Switching and Routing 4 years ago

Ohh pretty.Are all the networks using a /24 mask. If not what are they using?Where is the default...

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

Not to get too far off topic. But I assume your PC received an IP from the Router via DHCP and that...

pompeychimes commented on Making 2 VLANs talk to 1 server in LAN, Switching and Routing 4 years ago

Do you have a diagram? I'm not getting an accurate picture of the network from your description....

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

Did you try no flow control?At this point I'd be trying different apapter (Better still a legacy...

pompeychimes commented on Not in Possession of Password for Cisco 871W in WAN, Routing and Switching 4 years ago

Try connecting with each of the available flow control settings.James

pompeychimes commented on Unexpectedly slow speed through VPN tunnel in WAN, Routing and Switching 4 years ago

Up your pings to 1500 bytes. If it fails, reduce the byte size (1480, 1460, 1420, etc...) till you...

pompeychimes commented on Unexpectedly slow speed through VPN tunnel in WAN, Routing and Switching 4 years ago

Does any traffic over the VPN perform as expected. For example how does a simple ping perform using...

pompeychimes commented on Forward tcp port to server on LAN - Cisco 5510 in WAN, Routing and Switching 4 years ago

What version of code are you running on the 5510? Issue the "sh ver" command to determine.James

pompeychimes commented on Is it possible to forward port 443 to an internal server with the same IP used for dynamic NAT in WAN, Routing and Switching 4 years ago

Here you go...static (inside,outside) tcp interface https x.x.x.x https netmask 255.255.255.255x.x....

pompeychimes commented on Is it possible to forward port 443 to an internal server with the same IP used for dynamic NAT in WAN, Routing and Switching 4 years ago

What you are trying to do is very common practice. Unfortunatly I don't use the GUI so I can't...

pompeychimes commented on FTP not working with CISCO 877 in WAN, Routing and Switching 4 years ago

I was able to login. I replied to your PM.

pompeychimes commented on FTP not working with CISCO 877 in WAN, Routing and Switching 4 years ago

I'll assume these are your attempts...tcp 198.200.18.60:21      192.168.1.250:21      88.198.46.51:...

pompeychimes commented on FTP not working with CISCO 877 in WAN, Routing and Switching 4 years ago

OK, from device on the Internet or a site like this http://ping.eu/port-chk/ try to open ftp....

pompeychimes commented on FTP not working with CISCO 877 in WAN, Routing and Switching 4 years ago

Now source it from the outside interface of the Router...telnet 192.168.1.250 21 /source-interface...

pompeychimes commented on FTP not working with CISCO 877 in WAN, Routing and Switching 4 years ago

Can you open port 21 from the router? From the CLI of the Router enter this command and hit enter....

pompeychimes commented on DHCP Offer, but no ACK from client on VLan in LAN, Switching and Routing 4 years ago

I'm confused as to why the DHCP Server (192.168.0.16) is using the Check Point UTM (192.168.0.1) as...

pompeychimes commented on Needing to give a Noob access to shut/no shut a port in WAN, Routing and Switching 4 years ago

You got my brain churning with this one. You could probably do it with Perl, Expect, EEM/TcL, even...

pompeychimes commented on Routing/ACL question in WAN, Routing and Switching 4 years ago

Is ping allowed to traverse your PIX and ASA?Are the LAN networks of site a and b defined in the...

Bio












pompeychimes's Stats

Points172
Discussion started 7
Answers marked as Correct 19
Endorsed 0
Content Rated 44