Paul Stojanovski

Member Since: Jan 13, 2012

English
Paul Stojanovski commented on "Cannot connect to Server" jabber issue when login to Expressway-E in Jabber Clients 1 year ago

Since your CUCM and IM & Presence servers are in a different domain than your Collab Edge...

Paul Stojanovski commented on Jabber MRA call out don not have audio and video in Jabber Clients 1 year ago

Is there a firewall in the path between the Expressway-C and Expressway-E Internal NIC?Have you...

Paul Stojanovski commented on Access Expressway GUI when JG is enabled in Jabber Guest 1 year ago

Mike, I don't see why that would not work. Have you tested it? -P

Paul Stojanovski commented on Expressway-E no Audio in TelePresence 1 year ago

Many times this is either a design misconfiguration or a firewall issue. Here are a few questions...

Paul Stojanovski commented on Time lag between camera sweep not Frequently moving to active speaker for CTS 1300 telepresence in TelePresence 1 year ago

A few things to consider. 1) Has the Table Configuration been modified as described in the guide...

Paul Stojanovski commented on VCS Traversal Zones in TelePresence 1 year ago

Gordon, 1) On the VCS Control you would create a Traversal Client zone.2) On the VCS Expressway you...

Paul Stojanovski commented on Jabber MRA no voice and video in Jabber Clients 1 year ago

Tommy, What you have highlighted is incorrect. That value should be 202.169.42.226. I base the...

Paul Stojanovski commented on Jabber MRA no voice and video in Jabber Clients 1 year ago

The Static NAT address is supposed to be the Public IP of the Expressway-E. Otherwise the...

Paul Stojanovski commented on VCS Traversal Zones in TelePresence 1 year ago

Gordon, Use another Traversal Zone for B2B calls. Leave the UC Traversal for the Jabber clients...

Paul Stojanovski commented on Jabber MRA no voice and video in Jabber Clients 1 year ago

Tommy,Without seeing the Expressway-C and Expressway-E it's hard to say for sure. A few questions...

Paul Stojanovski commented on VCS' certificates for transversal zone / unable to to connect to server TLS negotiation failure in TelePresence 1 year ago

Anthony, You're missing the Certificate Authority certificate who signed one of the servers certs....

Paul Stojanovski commented on Jabber Expressway MRA cannot communicate with the Servers in Jabber Clients 1 year ago

Tommy,   It looks like the Jabber client is resolving the collab-edge record and trying to make a...

Paul Stojanovski commented on jabber edge call can't answer in Jabber Clients 1 year ago

This is what I suspected. The symptom you described matches a defect on the CUCM in this software...

Paul Stojanovski commented on jabber edge call can't answer in Jabber Clients 1 year ago

Bo, Is your CUCM running SU1? What is the full CUCM version? -P

Paul Stojanovski commented on jabber edge call can't answer in Jabber Clients 1 year ago

Which versions of software are you running on: CUCMJabberExpressways Also, have you deployed your...

Paul Stojanovski commented on Unable to login to IM from the Internet at random periods in Jabber Clients 1 year ago

It's quite interesting that the issue would occur at various days during the week. Intermittent...

Paul Stojanovski commented on SIP error 503 Service Unavailable in Jabber Guest 1 year ago

Are your RMS licenses applied on both the Expressway-E and Expressway-C? From the 503, it appears...

Paul Stojanovski commented on Windows Jabber (voice only) configuration with CUCM 9.1 in Jabber Clients 1 year ago

This might be a good source of information. http://www.cisco.com/c/en/us/support/docs/unified-...

Paul Stojanovski commented on searching a telepresence device in TelePresence 1 year ago

Hasan, I'm not sure if this will help you but the Cisco TAC has a loopback number you can dial into...

Paul Stojanovski commented on Jabber Guest server Local SSL certificate in Jabber Guest 1 year ago

Jeff, I had a look at my Jabber Guest server this morning and oddly enough I found the same thing...

Paul Stojanovski commented on Jabber login from public network not working in Jabber Clients 1 year ago

As mentioned in my post above. the Static NAT Address should be the Public IP of the Expressway-E ...

Paul Stojanovski commented on Jabber login from public network not working in Jabber Clients 1 year ago

If you have the Advanced Networking option key (Dual NIC) you get two things.1) Ability to use the...

Paul Stojanovski commented on Jabber login from public network not working in Jabber Clients 1 year ago

Typically these issues stem from one of two problems.1) Configuration as it pertains to the design...

Paul Stojanovski commented on MRA - Remote endpoints in TelePresence 1 year ago

I don't think that is the issue because secure registration is not mandatory. The logs will provide...

Paul Stojanovski commented on Cisco Jabber with VCS-C or VCS-E in Jabber Clients 1 year ago

The Jabber that you are referring to is Jabber Video. Manish was sending a guide that is for Mobile...

Paul Stojanovski commented on Cisco Jabber UDS SRV records with multi domain in Jabber Clients 1 year ago

The Expressway-C does not have the logic to differentiate the internal and external domain....

Paul Stojanovski commented on Jabber login from public network not working in Jabber Clients 1 year ago

You've typed qcci.com so the SRV lookup will go to _collab-edge._tls.qcci.com. Ive checked and...

Paul Stojanovski commented on IX5G Dev Kit in TelePresence 1 year ago

Jim, I'm not entirely sure if the dev kits come with instructions. On page 68 of the guide below is...

Paul Stojanovski commented on MRA - Remote endpoints in TelePresence 1 year ago

Check out this article I wrote. Let me know if it helps you: http://www.cisco.com/c/en/us/support/...

Paul Stojanovski commented on CTS 500-32 “unable to retrieve boot image” on touch panel error in TelePresence 1 year ago

CTS-500-32 uses .P2 loads. The load you specified is .P1 which is used by the larger form-factor...

Paul Stojanovski commented on MRA feature will work on vcs expressway C and E without licenses/release key ? in TelePresence 1 year ago

Are you referring to the Expressway series license keys? If so yes, it will work as long as you are...

Paul Stojanovski commented on Cisco Expressway softphone is not registering externally in TelePresence 1 year ago

I do not see the REGISTER message being received in the Expressway-E or Expressway-C logs. This...

Paul Stojanovski commented on Cisco Jabber MRA : Cannot login from internet in Other Collaboration, Voice, and Video Subjects 2 years ago

I had a look at the jabber logs that were provided and the issue appears to be host name resolution...

Paul Stojanovski commented on How to Perform CTS 500 Factory Reset in TelePresence 2 years ago

Hi,You mentioned that the CTS 500 is not booting after you uploaded new firmware. Can you confirm...

Paul Stojanovski commented on Upgrade CTS 3000 codec image from 1.5 to 1.7 in TelePresence 2 years ago

Many of those older codes have been pulled from the cisco website because it's really not advisable...

Paul Stojanovski commented on CUCM doesn't create the log files. in TelePresence 2 years ago

Hello,From the title of the post it suggests that CUCM does not capture the log files to analyze...

Paul Stojanovski commented on What is the difference between primary codec and secondary codec in cts-3000? in TelePresence 2 years ago

Hi,On a CTS 3000 system you have 1 primary codec and 2 secondary codecs. The secondary codecs are...

Paul Stojanovski commented on IP phone configuration neede in TelePresence 2 years ago

Kabeer,Could you give us some more information about your situation/scenario? The reason I ask is...

Paul Stojanovski commented on Has anyone monitored the C-Series CODECs using Cisco Media Services Interface (MSI)? in TelePresence 2 years ago

I'm not familiar with LiveAction at all but I have used the Cisco Prime Collaboration product quite...

Paul Stojanovski commented on TX9000 telnet connection error in TelePresence 2 years ago

mkazim, These issues are commonly due to some type of power related issue between the camera and...

Paul Stojanovski commented on What is the difference between CTS-PRJTR-GEN1 and GEN2? in TelePresence 2 years ago

GEN is used for generation in this case. We had Generation 1 projectors early on and as you would...

Paul Stojanovski commented on CTS remote presentation in TelePresence 2 years ago

Alex,I looked through the options in the GUI and CLI on the latest TX6.1.1 code. I do not see any...

Paul Stojanovski commented on TX9000 adding a 2nd PC Monitor in TelePresence 2 years ago

Lance,If you are referring to an additional Auxiliary Display commonly installed above or to the...

Paul Stojanovski commented on Multisite with CTS1300 in TelePresence 4 years ago

George,Can you further elaborate on your issue? Are you bringing the CTS 1300 into a multipoint...

Paul Stojanovski commented on Lost scheduled meeting list on Cts Midlet in TelePresence 4 years ago

Baris,It's tough to say without many of the background questions Paula has asked. I will say that...

Paul Stojanovski commented on Open source software for CTMS in TelePresence 4 years ago

Here is the Administration Guide which walks you through exactly how to install and configure.http...

Bio












Paul Stojanovski's Stats

Points65
Discussion started 0
Answers marked as Correct 10
Endorsed 0
Content Rated 0