PAUL TRIVINO

Member Since: Nov 20, 2003

English
PAUL TRIVINO commented on CSM does not show rule numbers when using sections? in Security Management 1 year ago

This appears to be still true in CSM 4.7.0 but the answer appears to still work, too.  Thanks.

PAUL TRIVINO commented on ASA "AD Integration" - where to start in Firewalling 1 year ago

Excellent, thanks.

PAUL TRIVINO commented on ASA "AD Integration" - where to start in Firewalling 1 year ago

Karsten, one thing we'll want is to test first, of course - do you happen to know if I can then...

PAUL TRIVINO commented on ASA "AD Integration" - where to start in Firewalling 1 year ago

Karsten, thanks.  Those look like good links (they *work*, for sure...;^) and will be useful.  I'll...

PAUL TRIVINO commented on CSM upgrade 4.x - Answers to commonly asked questions. in Security Management 1 year ago

It would be really handy if this blog (entry) were kept up to date.  I am at 4.4.0 SP2 and I want...

PAUL TRIVINO commented on Cisco Security Manager uses a NULL username to access Cisco ASA FWs in Security Management 1 year ago

Not sure but it happens in CSM 4.4.0SP2 as well.  I am hoping it goes away as of 4.7.  But, it...

PAUL TRIVINO commented on CSM service CRMDmgtd is not starting in Security Management 1 year ago

Marvin has an important point:  if you have FURTHER troubles with this install, you might well NOT...

PAUL TRIVINO commented on Failed to setup Velocity Engine ... in Cisco Security Manager in Security Management 1 year ago

I believe this is where you need to run CSM Configuration Manager as Administrator.  I had that...

PAUL TRIVINO commented on CSM 4.5 cancelling a deployment in Security Management 2 years ago

Haven't had to do it yet but as I recall there is a "Rollback" function, somewhere.  Sorry I can't...

PAUL TRIVINO commented on Unable to login to CSM Config Manager using Radius Authentication in Security Management 2 years ago

As I understand it, you must also define the users in Common Services and set their role there.  ...

PAUL TRIVINO commented on ASA NAT when not on interface network in Firewalling 2 years ago

Jon, we could ping from the ASA to the router IP and v.v., but could not ping from the router to...

PAUL TRIVINO commented on What is AP H-REAP Native Vlan used for? in Other Wireless - Mobility Subjects 2 years ago

Thanks for taking the time, Scott.  We use DHCP with reservations, so if the port gets changed we...

PAUL TRIVINO commented on What is AP H-REAP Native Vlan used for? in Other Wireless - Mobility Subjects 2 years ago

- kind of my point, Scott.  As you say the AP will get an IP from DHCP, on whatever vlan is native...

PAUL TRIVINO commented on What is AP H-REAP Native Vlan used for? in Other Wireless - Mobility Subjects 2 years ago

Thanks Scott - further info:  the Vlan Mappings are filled in with the appropriate Vlans, which are...

PAUL TRIVINO commented on ASDM to set "access-group <acl-name> global" in Firewalling 2 years ago

No, sorry, I don't want to rename the ACL. I want to specify a different, already coded ACL to...

PAUL TRIVINO commented on ASDM to set "access-group <acl-name> global" in Firewalling 2 years ago

What I need is how to change WHICH ACL is assigned as global. Thanks.Sent from Cisco Technical...

PAUL TRIVINO commented on ASDM to set "access-group <acl-name> global" in Firewalling 2 years ago

Actually what I need to know is how to change which ACL is set to global, from ASDM. Thanks.Sent...

PAUL TRIVINO commented on Zone-based Firewall - Allow "established" flag? in Firewalling 3 years ago

Thanks Sourav, good call - you are right, of course.  I will need to make this 'pass' in both...

PAUL TRIVINO commented on Zone-based Firewall - Allow "established" flag? in Firewalling 3 years ago

I'm sorry, I wasn't clear - I meant using the 'established' keyword in an ACL invoked by the ZBFW...

PAUL TRIVINO commented on Zone-based Firewall - Allow "established" flag? in Firewalling 3 years ago

Yes, I realize it is asymetric routing.What I was asking was, is allowing 'established' valid in a...

PAUL TRIVINO commented on BGP soft in - any negative effects? in WAN, Routing and Switching 3 years ago

What I was trying to fix is getting:ROUTER#sh ip bgp nei a.b.c.d received-routes % Inbound soft...

PAUL TRIVINO commented on RV-082 Can't pull DHCP IP address from cable modem in WAN, Routing and Switching 6 years ago

My cable modem at home will not issue a DHCP address to a 'new' connected device without the cable...

PAUL TRIVINO commented on How to find 6500 blade ROMMON Images in LAN, Switching and Routing 6 years ago

Thanks for your reply but I am looking for how to find the images on CCO I can load to *replace*...

PAUL TRIVINO commented on Cannot get IOS Root CA to run in Other Security Subjects 6 years ago

I did but that's the problem - the documentation says you can use 'any IOS-supported file system'...

PAUL TRIVINO commented on Question about QoS in router SDM in WAN, Routing and Switching 7 years ago

In the CLI, you select input or output for a policy when you apply it to the interface, like'...

PAUL TRIVINO commented on Stop BGP==>RIB Updates? in WAN, Routing and Switching 7 years ago

My "Default Administrative Distance" chart shows 255 as "Unknown," guess I'll have to update that...

PAUL TRIVINO commented on Backup Boot Image on SUP720 in LAN, Switching and Routing 8 years ago

Another good call, Mark. A quick check shows this is the oldest ROMMON of my collection of SUP720'...

PAUL TRIVINO commented on Backup Boot Image on SUP720 in LAN, Switching and Routing 8 years ago

Thanx Mark. I should mention that the SUP doesn't even TRY to find the next file specified - it...

PAUL TRIVINO commented on Media connectors in LAN, Switching and Routing 8 years ago

Sushil, I think that's backwards - SFPs do LC and GBICs do SC, yes?Also FWIW (to the original...

PAUL TRIVINO commented on Router as NTP server in LAN, Switching and Routing 8 years ago

Rick, just to complete the loop here: am I correct that an NTP sync'd IOS device will "...

PAUL TRIVINO commented on 3750 > 3550 QoS in LAN, Switching and Routing 8 years ago

Removing the VLAN should have no effect, just make sure the routed link has the same treatment.I...

PAUL TRIVINO commented on Questions about Catalyst 3500 XL Switch in LAN, Switching and Routing 8 years ago

I looked in the Feature Navigator and "igmp snooping" didn't have anything listed before IOS 12.1...

PAUL TRIVINO commented on 3750 > 3550 QoS in LAN, Switching and Routing 8 years ago

The "Enterprise QoS" design guide at http://www.cisco.com/en/US/netsol/ns656/...

PAUL TRIVINO commented on T1 Card in Getting Started with LANs 8 years ago

IMHO the books towards CCNA & CCNP generally teach principles and some basic config info....

PAUL TRIVINO commented on how to utilize two links on one interface from two ISP's. in WAN, Routing and Switching 8 years ago

One device I know of is a Radware Linkproof. I believe all models are Ethernet/FE/GE based, goes...

PAUL TRIVINO commented on suggession in WAN, Routing and Switching 8 years ago

I *think* it depends on the model. Can you post the part number? You can use "sh diag" to get...

PAUL TRIVINO commented on Cisco 2501 in WAN, Routing and Switching 8 years ago

The config register value is probably not set correctly. Check this document:http://www.cisco.com/...

PAUL TRIVINO commented on Help conf 2651XM router for use w/ Optimum static ISP in WAN, Routing and Switching 8 years ago

If you have assigned 96.x.x.114 255.255.255.248 to the Fa0/0, you *have* assigned only one public...

PAUL TRIVINO commented on Subnetting problem in WAN, Routing and Switching 8 years ago

Let me address these inline:> All that i have is one cisco router that has > 2 wic 2t cards....

PAUL TRIVINO commented on ios command for active connection in WAN, Routing and Switching 8 years ago

Or, try this - "sh int summary" where "*" means the interface is UP:NETFTLWRT01#sh int summ | incl...

PAUL TRIVINO commented on Need help configuring QOS in LAN, Switching and Routing 8 years ago

Check out the Enterprise QoS Design Guide here:http://www.cisco.com/en/US/netsol/ns656/...

PAUL TRIVINO commented on fractional T3 in WAN, Routing and Switching 8 years ago

On T3's my experience is that the "dsu-bandwidth" must match at both ends. I believe you can have...

PAUL TRIVINO commented on Out of band management for remote offices in WAN, Routing and Switching 8 years ago

I've used Baytech remote console devices at a number of installations. The units have a Modem/...

PAUL TRIVINO commented on Calling LAN QoS experts! in LAN, Switching and Routing 8 years ago

Good point too. Also, don't depend on "sh policy-map int x/y" for whether or not the traffic is...

PAUL TRIVINO commented on Calling LAN QoS experts! in LAN, Switching and Routing 8 years ago

If you haven't seen it (although you seem pretty knowledgeable on QoS), check out the Enterprise...

PAUL TRIVINO commented on configuration changes in router in LAN, Switching and Routing 8 years ago

If I'm not mistaken, youwon't see this if there have been no changes since a reboot. The 3845 on...

PAUL TRIVINO commented on configuration changes in router in LAN, Switching and Routing 8 years ago

If there are some form of individual UserIDs, at the top of the "sh run" you'll see something like...

PAUL TRIVINO commented on Subnetting problem in WAN, Routing and Switching 8 years ago

OK, given just the information provided let me make a couple of assumptions - the 8 lines to the (...

PAUL TRIVINO commented on qos on switches in LAN, Switching and Routing 8 years ago

There is a very good document - http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/...

Bio












PAUL TRIVINO's Stats

Points132
Discussion started 39
Answers marked as Correct 5
Endorsed 0
Content Rated 56