ramkris2

Member Since: Feb 16, 2008

English
ramkris2 commented on Missing AP's in NCS Prime in Other Wireless - Mobility Subjects 1 year ago

Correct. WLC 7.6 requires atleast PI 2.1. To get all the bug fixes, I would suggest PI 2.2 + 2.2.2...

ramkris2 commented on CIsco Prime New Floor Area Does Not Display in Other Wireless - Mobility Subjects 1 year ago

Hi Bret,If there are any jobs running/hung  for "MapTileGeneration" Job in Administration -->...

ramkris2 commented on Adding Controllers to the Prime Infrastructure in Getting Started with Wireless 1 year ago

Hi Mohammad,There are two themes in the GUI. You must be at the default - Life cycle theme. WLC can...

ramkris2 commented on Cisco Prime Infrastructure 2.2 - Users historic information not displayed / Client Statistics task stuck in running in Network Management 1 year ago

Hi Pam,Sorry to hear that you got stuck in this situation.This should be taken care in the next...

ramkris2 commented on Cisco Prime Infrastructure 2.2 - Users historic information not displayed / Client Statistics task stuck in running in Network Management 1 year ago

Hello,Multiple tasks are stuck in waiting state which can cause the client data processor to be...

ramkris2 commented on Cisco MSE Service No Longer Starting Properly MSE 7.4.100.0 in Network Management 1 year ago

Can you tar everything under the logs directory & upload it here ? On the MSE, logs are under /...

ramkris2 commented on MSE factory reset in Getting Started with Wireless 1 year ago

If you can make sure the services are running on the MSE & re-add it to WCS, it can be done...

ramkris2 commented on How do we suppress Cisco Prim Alarm ? in Network Management 1 year ago

Hi Ananthan,When you 'acknowledge' an alert, it would be automatically suppressed for 7 days.Ram

ramkris2 commented on Infrastructure 2.2 using config mode to collect configs? in Network Management 1 year ago

Hi Dave,This has been identified as the following bug & the fix will be available in the next...

ramkris2 commented on Cisco Prime Infrastructure 2.1 can't add Cisco ISE 1.2 to "External Management Servers" in Network Management 1 year ago

Shahin,I would suggest installing PI 2.1.2 patch & then trying to add the ISE.Also, few more...

ramkris2 commented on Prime Infrastructure License types in Network Management 1 year ago

Hi Brian, You would need the "Assurance License" to be able to get the netflow data from your...

ramkris2 commented on PI 2.2 automatically export ClientsAndUsers data to .csv in Network Management 1 year ago

Hi Waldemar,That won't be possible. But you can get the same data by running a report from Reports...

ramkris2 commented on Prime Infrastructure 2.1 - Power supply alarms on switchs in Network Management 1 year ago

Marvin,Yes, It was found internally. There isn't an external version.

ramkris2 commented on Cisco-Prime2.2 in Network Management 1 year ago

Can you get a screenshot from the Administration > Appliance page in the GUI ?The disk space won...

ramkris2 commented on Cisco Prime 2.1 and 2.2 in Network Management 1 year ago

To answer your specific question:Yes, you can have both the servers (2.1 and 2.2) running at the...

ramkris2 commented on Prime Infrastructure 2.1 - Power supply alarms on switchs in Network Management 1 year ago

 Hello,It's tracked by the following bug:CSCui46231    Processing Alarm on power supply failure and...

ramkris2 commented on PI pi212_20141118_01.ubf install fails in Network Management 1 year ago

Patoberli:This is a known bugCSCum53931   PI -> Software Update -> Pending Restart says Yes...

ramkris2 commented on I want to start collecting netflow in Network Management 1 year ago

If you have Prime Infrastructure (PI) as the Management application, you would need an Assurance...

ramkris2 commented on Including Interface Description in Cisco PRime Infrastructure Alarm Message in Network Management 1 year ago

Hi Alessandro,Unfortunately, scripting won't be possible to accomplish this.Regards,Ram.

ramkris2 commented on WCS 7.0.220.0 Support with WLC Image 8.0.110.0 in Security and Network Management 1 year ago

Hi Muhammad,WCS is end of life (link below) & won't be able to manage WLC's running 8.0 code....

ramkris2 commented on Prime Infra 2.2: What means "Collection status: failed features"? in Network Management 1 year ago

Strange. If the alert comes back, can you get a screenshot from the Administration > Appliance...

ramkris2 commented on PI 2.2.0 Converged Theme - create WLAN configuration scheduled task in Network Management 1 year ago

Jim,In the converged theme, it's under:Inventory > Network Devices > Device Type >...

ramkris2 commented on Software Images page in Cisco Prime Infrastructure 2.2 broken after installing patches in Network Management 1 year ago

Perry:There is a patch available for this issue now. Check with your TAC EngineerRam

ramkris2 commented on Prime Infra 2.2: What means "Collection status: failed features"? in Network Management 1 year ago

Hi Scott,There is a Field Notice: FN - 63645 on RAID failures with PI appliances.Open a TAC case to...

ramkris2 commented on Including Interface Description in Cisco PRime Infrastructure Alarm Message in Network Management 1 year ago

Hi Alessandro,The options that can be included for E-mail notifications are listed under:...

ramkris2 commented on Cisco Prime NCS in Getting Started with Wireless 3 years ago

Hello,Search for the AP using 'Advanced Search' option & look for any critical alarms for that...

ramkris2 commented on Upgrade from WCS Base to Plus Licence in Other Wireless - Mobility Subjects 3 years ago

Hello,Answers below.A1. Short answer is 'yes'. WCS-PLUS-UPG-50 is the upgrade license which turns...

ramkris2 commented on Virtualized WLC + Prime + MSE solution in Other Wireless - Mobility Subjects 3 years ago

Hi Pongsatorn,This is caused by a bug with the ID - CSCub42987. And yes, it only applies to the...

ramkris2 commented on WCS to prime infrastructure 1.2 in Security and Network Management 3 years ago

Hello,On the link below, take a look at the section "Ordering Information for Existing Cisco WCS 7....

ramkris2 commented on NCS - Permit read-only access to Network Configuration in Security and Network Management 3 years ago

Ed,System monitoring group won't allow access to the Configure --> Controllers page. As the page...

ramkris2 commented on Simple question regarding "Save Guest Accounts on Device" in WCS in Getting Started with Wireless 3 years ago

Hi Robert,The "Save Guest Accounts on Device" option is for the already existing guest accounts on...

ramkris2 commented on Data Migration from WCS to NCS in Security and Network Management 3 years ago

yes, 7.0.230.0 would be even better.WCS can't be migrated directly to PI 1.2.1. It would be a two...

ramkris2 commented on Prime infratructure NCS 1.2 CSCOlumos/bin/wcsadmin error in Security and Network Management 3 years ago

Vincent,Scott is right.. NCS/PI is very resource intensive. Please make sure the recommeded...

ramkris2 commented on CiscoPI 1.2 support for IE 2000 confirmation awaited in Security and Network Management 3 years ago

Hi Muzammi,Here is a document which lists the complete list of supported devices on Prime...

ramkris2 commented on Cisco WCS 7.0.230.0 (Disable Alarms & Email Custom Subject line) in Other Wireless - Mobility Subjects 3 years ago

Hi Marco,1. Yes. It can be done from Administration > Settings > Alarms page > under "...

ramkris2 commented on NCS AP Reports in Security and Network Management 3 years ago

Hi Jay,I would start by verifying facts. Are the AP's really disassociating from the Controller ?If...

ramkris2 commented on Cisco WCS HA in Security and Network Management 3 years ago

Hello,All the components in the service (java, apache, & the Solid database engine) have to be...

ramkris2 commented on Cisco NCS logging in Security and Network Management 3 years ago

Hi Martijn,You can collect the logs from the Administration --> logging page. The ncs-x-x.log in...

ramkris2 commented on wcs and wlc snmp in Security and Network Management 3 years ago

Hello,Good question. The answer is No.WCS would still poll the controller(s) through SNMP to get...

ramkris2 commented on WCS to NCS in Security and Network Management 3 years ago

Hello,Yes, the Virtual appliance option is available. The link below explains the details:http://...

ramkris2 commented on Lobby User using RADIUS Server in the NCS in Security and Network Management 3 years ago

Hello,Yes, you could use RADIUS to authenticate lobby ambassador users. But the information like...

ramkris2 commented on New installed NCS doesnt send alarms in Other Wireless - Mobility Subjects 3 years ago

If the test mail gets sent successfully, the alerts would be using the same mail server settings as...

ramkris2 commented on Adding a Virtual WLC to WCS in Security and Network Management 3 years ago

With each train of WLC, new SNMP MIBS/objects would be added for newer features & enhanced...

ramkris2 commented on Assign mobility Anchors to WLAN - NCS in Security and Network Management 3 years ago

Yes, Correct. The templates won't have that option.It has to be done using CLI templates or...

ramkris2 commented on cisco prime guest user email in Security and Network Management 3 years ago

Hello,The logo on the page which would be printed with the guest user credentials can be customized...

ramkris2 commented on Tips for upgrading to Prime Infrastructure in Security and Network Management 3 years ago

If all the components are running, when looked from the CLI using the 'ncs status' command it could...

ramkris2 commented on WCS BYOD in Security and Network Management 3 years ago

You can run guest user reports or client session reports to see that information.Then use a...

ramkris2 commented on WCS 7.0 keeps timing out in Security and Network Management 3 years ago

Hello,You can set the "User session Timeout" by navigating under:Administration --> User...

ramkris2 commented on MSE 3310 location appliance in Security and Network Management 3 years ago

Yes. To do location tracking only the Context Aware Service (CAS) service in the MSE framework...

ramkris2 commented on Prime and Date Format in Security and Network Management 3 years ago

Valid point. I'll make a note of it & track this internally.I don't think it's possible at the...

Bio












ramkris2's Stats

Points146
Discussion started 0
Answers marked as Correct 14
Endorsed 0
Content Rated 1