ricardorojas123

Member Since: Mar 30, 2007

English
ricardorojas123 commented on Uplinks SUP7L-E in LAN, Switching and Routing 3 years ago

Hi,I have the last question, if the primary supervisor fails (slot03), Can I connect the uplinks...

ricardorojas123 commented on Uplinks SUP7L-E in LAN, Switching and Routing 3 years ago

you're right, this design does not have high availability.you can give me any suggestions?

ricardorojas123 commented on Uplinks SUP7L-E in LAN, Switching and Routing 3 years ago

Hi,So,The uplink of the 3750-01 is connected to Port 01 of Primary Supervisor.The...

ricardorojas123 commented on Constant disconnection of Wireless Clients in Getting Started with Wireless 3 years ago

Scott,dot11 syslogdot11 ssid SSID1   authentication open   authentication key-management wpa   wpa-...

ricardorojas123 commented on Constant disconnection of Wireless Clients in Getting Started with Wireless 3 years ago

Hi friends,The configuration of the APs was tested in a lab environment and this tests were...

ricardorojas123 commented on Transfer external calls to internal phones - CUCM in IP Telephony 3 years ago

Chris,I have disabled the MTP option, and now the calls can be transfered, thanks!

ricardorojas123 commented on Registering 6921 in CUCM 8.0 in IP Telephony 3 years ago

I reset the phone to factory default, and now the phone is registered in the CUCM.

ricardorojas123 commented on Registering 6921 in CUCM 8.0 in IP Telephony 3 years ago

HiIn the section: Device > Device Setting > Device Default, in the 6921 I have this:Load...

ricardorojas123 commented on Registering 6921 in CUCM 8.0 in IP Telephony 3 years ago

Hi Jaime,The phones were configured manually in  the CUCM, the Cisco 6921 is available in the menu...

ricardorojas123 commented on Guest Vlan - Assignment Error 3560 in AAA, Identity and NAC 3 years ago

Hi Jatin,I have uploaded the IOS to c3560-ipbase-mz.122-35.SE5, and now the guest vlan is working....

ricardorojas123 commented on Guest Vlan - Assignment Error 3560 in AAA, Identity and NAC 3 years ago

Hi Jatin,My answers to your questions:1.] What dot1x mode have you configured on interface fa0/8. I...

ricardorojas123 commented on Guest Vlan - Assignment Error 3560 in AAA, Identity and NAC 3 years ago

Hi, friends any suggestions?

ricardorojas123 commented on Upgrade CUCM desde 7.1 a 8.5 in Voz IP 4 years ago

Hola Miguel,Mira en lo nuevo esta considerado el PAK "UCSS for UCM Essential". Y la migración no...

ricardorojas123 commented on Feature SRST Router 2911 in IP Telephony 4 years ago

Thanks Rob.Huffman and Paolo,In IOS version 15.0 the feaure cme-srst is part of uck9!!

ricardorojas123 commented on Feature SRST Router 2911 in IP Telephony 4 years ago

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)...

ricardorojas123 commented on Feature SRST Router 2911 in IP Telephony 4 years ago

Paolo:CISCO2911/K9 Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)

ricardorojas123 commented on Feature SRST Router 2911 in IP Telephony 4 years ago

Thanks Bevilacqua,I entered the command license accept end user agreement and then I reload the...

ricardorojas123 commented on Problems Installation CUCM in ESXi5 on UCS210 in IP Telephony 4 years ago

Thank you very much for your comments and help GP.

ricardorojas123 commented on Automating the CCM configuration in IP Telephony 4 years ago

Thanks, I will try whit the Import/Export.

ricardorojas123 commented on SIP Trunk CME in Voz IP 4 years ago

Gracias a todos por su colaboracion.Esa duda tenia si un CME era capaz de soportar SIP inbound...

ricardorojas123 commented on SIP Trunk CME in Voz IP 4 years ago

Gracias Pablo por tu respuesta.Lo que necesito saber si es que yo puedo configurar un username y...

ricardorojas123 commented on Wireless Design in Getting Started with Wireless 4 years ago

Sebastian Helmer,I am reviewing the DataSheet of the 1140, but I can not see the information that...

ricardorojas123 commented on Wireless Design in Getting Started with Wireless 4 years ago

To reduce the power (mW) of the AccessPoint I have to change the "Tx Power Level" value in Wireless...

ricardorojas123 commented on Wireless Design in Getting Started with Wireless 4 years ago

Thanks leolaohoo,I answer your questions:1.  How high do you expect the AP...

ricardorojas123 commented on High Availability 3560 in LAN, Switching and Routing 4 years ago

Thanks Reza Sharifi and Jon Marshall,With his comments have created the following diagram:

ricardorojas123 commented on Almacenamiento de Logs de manera local in General 5 years ago

ok, gracias !

ricardorojas123 commented on CDR Incoming Call in IP Telephony 5 years ago

I agree, but when I analyze the CDR report, I can see only the outgoing calls from a directory-...

ricardorojas123 commented on CDR Billing Server Transfer Don´t Work in IP Telephony 5 years ago

Hi,I installed the freeFTP application on another server, and the CDR files were transferred...

ricardorojas123 commented on CDR Billing Server Transfer Don´t Work in IP Telephony 5 years ago

Hi Joemar2,Output of the CLI command " file list activelog /cm/cdr_repository/* date detail "...

ricardorojas123 commented on CDR Billing Server Transfer Don´t Work in IP Telephony 5 years ago

Hi and Thanks Phoghen,My configuration of CDR parameter under the Enterprise Parameter is as follow...

ricardorojas123 commented on CDR Billing Server Transfer Don´t Work in IP Telephony 5 years ago

Thanks Joe,My comments:I have two CUCM servers, Publisher and Subscriber, the parameters  ...

ricardorojas123 commented on Authentication 802.1X ACS and WLC4400 in Getting Started with Wireless 5 years ago

My apologies for not answering on time.The message displayed is:EAP-TLS or PEAP authentication...

ricardorojas123 commented on MAC Filter + WPA Autonomous AP in Getting Started with Wireless 5 years ago

ok, I will comment

ricardorojas123 commented on Restrict Wireless User in a WLAN on WLC4400 in Getting Started with Wireless 5 years ago

And I can create an exclusion list of users (by MAC) and link it to a WLAN ??

ricardorojas123 commented on Restrict Wireless User in a WLAN on WLC4400 in Getting Started with Wireless 5 years ago

Both SSID's are configured whit WPA2, and in the workstation are configured the two Wireless...

ricardorojas123 commented on Max. HSRP Group in 3750 in LAN, Switching and Routing 5 years ago

HSRP Configuration GuidelinesFollow these guidelines when configuring HSRP:•HSRP can be configured...

ricardorojas123 commented on Max. HSRP Group in 3750 in LAN, Switching and Routing 5 years ago

Ok, thanks.If I add an additional 3750 Switch, forming a Cluster. The capacity will increase?For...

ricardorojas123 commented on EIGRP Rutes Doubts in WAN, Routing and Switching 5 years ago

The core and the three ISP Routers are running EIGRP whit the same EIGRP AS number. And in the...

ricardorojas123 commented on Abnormal behavior in Wireless Network whit WLC and AP 1130 in Getting Started with Wireless 5 years ago

Dmantill,The primary controller specified in the access points of building B is the ip address of...

ricardorojas123 commented on Abnormal behavior in Wireless Network whit WLC and AP 1130 in Getting Started with Wireless 5 years ago

Thanks stevenjwilliams83, the access point are configured whit static ip address using capwap...

ricardorojas123 commented on ACS New WindowsDomain 2008 in AAA, Identity and NAC 5 years ago

Thanks Anisha,I attached the two scenario, the first picture show the actual scenario, the wireless...

ricardorojas123 commented on ACS integration with AD 2008 in AAA, Identity and NAC 5 years ago

What is the name of then Patch File ? In the page Download Software?

ricardorojas123 commented on Redirect Vlan Traffic To Server in LAN, Switching and Routing 5 years ago

Thanks iwhitmore,Yes, I want redirect the Web traffic to a proxy.

ricardorojas123 commented on PEAP with ACS 5.1 in AAA, Identity and NAC 5 years ago

So for the configuration of PEAP, whit ACS 5.1 and Windows 2003 Active Directory, I need this:1....

ricardorojas123 commented on WLAN 802.1X Add a new AD in Getting Started with Wireless 5 years ago

The dial-in permission is configured in the account of the user in the domain B.

ricardorojas123 commented on WLAN 802.1X Add a new AD in Getting Started with Wireless 5 years ago

Thanks Nicolas,I have set the relationship between the two domain controller servers. And I am able...

ricardorojas123 commented on Increase Metric Received EIGRP in WAN, Routing and Switching 5 years ago

But I can change the Administrative Distances of EIGRP ? 90

Bio












ricardorojas123's Stats

Points0
Discussion started 333
Answers marked as Correct 0
Endorsed 0
Content Rated 181