rosarra

Member Since: Jun 13, 2004

English
rosarra's Activity on Cisco Support Community
Currently displaying 20 results

rosarra has commented on Checkpoint to ASA NAT rule

1 year 1 week ago
Hi Jouni,please find attached a network schema that can help to better...

rosarra has commented on Checkpoint to ASA NAT rule

1 year 2 weeks ago
Hi Jouni,this is a good question: the EXT-DMZ Interface is also connected to...

rosarra has created Checkpoint to ASA NAT rule

1 year 2 weeks ago
I'm trying to move my configuration from a Chekcpoint firewall to an ASA 5520...

rosarra has commented on UC540 and SPA 504G Frozen on incoming call

2 years 1 month ago
Solved upgrading to SPA50G 9.5.4 rel. then resetting to factory default.

rosarra has created UC540 and SPA 504G Frozen on incoming call

2 years 1 month ago
Hello,recently I tried to configure a Cisco UC540 using two FXO interfaces and...

rosarra has created WCCP Tunnel MTU size

2 years 3 months ago
We recently upgraded a Catalyst 6509 switch with a new Supervisor Module (WS-...

rosarra has commented on WCCP & Bluecoat bad rcv_id

2 years 9 months ago
Unfortunatly in our case there is no solution for this issue. The problem is...

rosarra has commented on WCCP & Bluecoat bad rcv_id

2 years 9 months ago
Unfortunatly in our case there is no solution for this issue. The problem is...

rosarra has commented on Catalyst 6509E with a redundant supervisors, all ten uplinks active

2 years 11 months ago
I would like to configure the redundancy also using port channel features. I've...

rosarra has commented on Catalyst 6509E with a redundant supervisors, all ten uplinks active

2 years 11 months ago
I would like to configure the redundancy also using port channel features. I've...

rosarra has created Catalyst 6509E with a redundant supervisors, all ten uplinks active

2 years 11 months ago
On the Catalyst VSSE 720 supervisor data sheet I found that this supervisor: "...

rosarra has commented on WCCP & Bluecoat bad rcv_id

2 years 11 months ago
Here you found see the network diagram. The old working interface was the...

rosarra has commented on WCCP & Bluecoat bad rcv_id

2 years 11 months ago
Here you found see the network diagram. The old working interface was the...

rosarra has created WCCP & Bluecoat bad rcv_id

2 years 11 months ago
On a Catalyst 6509 switch I have configured wccp protocol in order to redirect...

rosarra has created Ironport - Queue is not mounted

4 years 3 months ago
Hello!after a power off my IronPort system is unable to accept/deliver emails...

rosarra has created Re: How to bypass the bluecoat

4 years 5 months ago
You can bypass the Bluecoat using the specific access-list on the switch if the...

rosarra has commented on How to bypass the bluecoat

4 years 5 months ago
You can bypass the Bluecoat using the specific access-list on the switch if the...

rosarra has commented on Aironet 1140: from lwap to autonomous AP

5 years 4 months ago
I've successfully downgraded my 1420 to autonomous AP using the monitor mode (...

rosarra has created Re: Aironet 1140: from lwap to autonomous AP

5 years 4 months ago
I've successfully downgraded my 1420 to autonomous AP using the monitor mode (...

rosarra has created ASA Failover Ping fail

7 years 11 months ago
Hello,I've a problem with two ASA 5520 configured for statefull failover Active...

Bio












rosarra's Stats

Points0
Discussion started 7
Answers marked as Correct 0
Endorsed 0
Content Rated 0