rowseyba1

Member Since: May 28, 2009

English
rowseyba1 commented on UC540--504 Phone Ring Cadence in Voice Systems 3 years ago

Thanks guys.  I did find the answer in another thread a few minutes after I opened this one.  I...

rowseyba1 commented on Cisco SPA 504G -Forward incoming call before answer- in Voice Systems 3 years ago

Christos,There should be an "Ignore" soft key that comes up on the phone when it's ringing.  This...

rowseyba1 commented on SPA508G Park Button in Voice Systems 4 years ago

Brenden,Thanks for the reply.  That was actually one of the first things I did to the phone.  The...

rowseyba1 commented on SPA525G2 unable to access admin section in Voice Systems 4 years ago

Yes, I've made that mistake myself once.  Cisco offers a provisioning server for those phones to...

rowseyba1 commented on Help with setting up SPA303 and/or 7960 in Voice Systems 4 years ago

That's unfortunate.  The recovery tool usually works with the serial number.  Have you tried using...

rowseyba1 commented on Help with setting up SPA303 and/or 7960 in Voice Systems 4 years ago

The SPC compiler will do this for you.  All you have to do is run it, and input the local IP...

rowseyba1 commented on Cisco SPA525-G2 Inbound Calls Failing After an Interval in Voice Systems 4 years ago

Cory,If it's a Sonicwall firewall, check the firewall logs and see if it is dropping the calls.  I'...

rowseyba1 commented on Help with setting up SPA303 and/or 7960 in Voice Systems 4 years ago

Ryan,It looks like your phone hasn't been factory defaulted.  I would call the person that you...

rowseyba1 commented on SPA508G Park Button in Voice Systems 4 years ago

Bump.  Anyone?

rowseyba1 commented on SPA504G: MWI for Voicemail in Voice Systems 4 years ago

Kevin,The voice mail server should be the internal or external IP address of the VM server or it's...

rowseyba1 commented on SPA 303 ip phone IP address 0.0.0.0. HELP!! in Voice Systems 4 years ago

Tamara,It sounds like your phone is not able to get an IP address from your modem's DHCP server. ...

rowseyba1 commented on SPA525G2 unable to access admin section in Voice Systems 4 years ago

It sounds like this phone has been plugged into a UC5xx or a UC320 before.  It's defaulting to it's...

rowseyba1 commented on UC320W & remote use via VPN in Voice Systems 4 years ago

Keith,The UC320 doesn't have knowledge of the LAN in the scenario mentioned. When you have it set...

rowseyba1 commented on UC320W & remote use via VPN in Voice Systems 4 years ago

Keith,I'm fairly certain that your scenario has never been tested with the UC320.  It is an...

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

You should be able to call TAC and open a case.  I know we were able to (way back when) we...

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

The problem I'm seeing is that the called number isn't making it through to be analyzed by a dial-...

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

On your dial-peer 1000 do this:session target sip-serverInstead of session target ipv4:41.183.0.13:...

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

Can you take another debug ccapi voice inout trace please?

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

Cyber,I think I edited my post above after you read.  Take out the voice source-group's.  They have...

rowseyba1 commented on Inbound Calls to Generic Sip Trunk Fail in Voice Systems 4 years ago

Cyber,The call is coming in and not matching an incoming dial peer.  The called number is not...

rowseyba1 commented on Update firmware on Linux in Voice Systems 4 years ago

Mark,There are a couple of different options for this:Option 1Use your phone system.  Your phone...

rowseyba1 commented on VPN setup for UC 540 in Voice Systems 4 years ago

When you say static to dynamic, do you mean that the UC540 has a static IP address and the other...

rowseyba1 commented on Cisco 800 Series Router Configuration in LAN, Switching and Routing 4 years ago

Chris,You will have to forward port 5060 (or whatever port your SIP provider uses) to the WAN IP of...

rowseyba1 commented on Cisco 800 Series Router Configuration in LAN, Switching and Routing 4 years ago

Chris,A couple of questions first.  Are you using SIP trunking for the UC320? Are you just using...

rowseyba1 commented on Setup remote users on UC540 in Voice Systems 4 years ago

Raymond,You will need to deploy a router capable of IPSEC or SSL VPN tunnels back to the UC540 for...

rowseyba1 commented on UC450 in Voice Systems 4 years ago

Hamish,The UC5xx can support multiple SIP trunk providers, however, it's not supported in CCA.  You...

rowseyba1 commented on SPA 525G in Voice Systems 4 years ago

I may be wrong, but I'm fairly certain that the SPA5xx phones only work with UC5xx, UC320, and as...

rowseyba1 commented on UC320 and third party sip phone? in Voice Systems 4 years ago

Unfortunately, no.  The UC320 was designed to only use the SPA5xx and SPA3xx phones. 

rowseyba1 commented on SPA 50X and 525 can't dial "#" in Voice Systems 4 years ago

This is the dial plan we use.  We have a phone system that requires codes with a # in front (#8, #9...

rowseyba1 commented on SPA 50X and 525 can't dial "#" in Voice Systems 4 years ago

3cx,What does your dialplan look like? 

rowseyba1 commented on Question on the Service-module IP address in Voice Systems 4 years ago

Jared,Unfortunately, you would probably need to set up some sort of remote desktop connection to...

rowseyba1 commented on Simplest way to forward all calls to a cell phone in Voice Systems 4 years ago

Actually, he is right Christian.  You can manually activate the night service feature by pressing...

rowseyba1 commented on Simplest way to forward all calls to a cell phone in Voice Systems 4 years ago

I believe that floating extensions can be routed in CCA directly to a cell phone.  You would also...

rowseyba1 commented on Simplest way to forward all calls to a cell phone in Voice Systems 4 years ago

Christian,The answer to your question really depends on how you have incoming calls routed.  If...

rowseyba1 commented on Unable to route calls to voice mail for voip calls across 2 sites in Voice Systems 4 years ago

That should not matter.  Would you be able to provide the debug mentioned above along with a debug...

rowseyba1 commented on Unable to route calls to voice mail for voip calls across 2 sites in Voice Systems 4 years ago

Okechi,Have you completed a debug voip ccapi inout on each side?One thing I would check and make...

rowseyba1 commented on Configuring DTMF on soft keys or Line Keys - SPA5xx IP phone in Voice Systems 4 years ago

Ok, that shouldn't be a problem.  What is the * code for you PBX to be able to do that?  All you...

rowseyba1 commented on 911 Calls Not Working in Voice Systems 4 years ago

That is correct. 

rowseyba1 commented on 911 Calls Not Working in Voice Systems 4 years ago

Remember the translation rule is for the 828 area code.  It will add and 828 to any 7 digit phone...

rowseyba1 commented on 911 Calls Not Working in Voice Systems 4 years ago

Are you fairly comfortable with CLI?  If so, you should see something like this when you do a show...

rowseyba1 commented on 911 Calls Not Working in Voice Systems 4 years ago

Jesse,Most likely you don't have a translation or a dial peer for 911.  Does it just go to fast...

rowseyba1 commented on UC540 behind ASA using SIP in Voice Systems 4 years ago

Yes sir.  Just 5060, unless your provider uses a different port. 

rowseyba1 commented on SPA922 Nightmare in Voice Systems 4 years ago

David,Without the password, I don't know of a way for you to be able to factory reset them.  There...

rowseyba1 commented on UC540 behind ASA using SIP in Voice Systems 4 years ago

Clifford,This is fairly easy.  You just NAT your SIP traffic to from your ASA to the  IP address of...

rowseyba1 commented on Call Forwarding to an External Number Issue in Voice Systems 4 years ago

Alan,I kind of figured that was the issue.  We don't block that kind of traffic for that very...

rowseyba1 commented on Call Forwarding to an External Number Issue in Voice Systems 4 years ago

If I were guessing, I would say that this call is being blocked on VoIP Unlimited's side.  Some SIP...

rowseyba1 commented on UC540 incoming call problem with hunt group in Voice Systems 4 years ago

Dale,I was able to find the issue.  By default, the UC540 makes each ephone-dn a dual line.  If you...

rowseyba1 commented on UC540 incoming call problem with hunt group in Voice Systems 4 years ago

Dale,What model phones are you using?

rowseyba1 commented on Rate Limit and QoS in LAN, Switching and Routing 4 years ago

Can you match the problem to those times of high utilization or does it happen randomly even if you...

rowseyba1 commented on UC540 incoming call problem with hunt group in Voice Systems 4 years ago

Odd.  That should have worked.  I will lab up this scenario in a few minutes and let you know what...

Bio












rowseyba1's Stats

Points34
Discussion started 12
Answers marked as Correct 6
Endorsed 0
Content Rated 6
Website: