russ.givens

Member Since: Aug 18, 2010

English
russ.givens commented on issues with seeing storage / vsan mismatch in Unified Computing 2 years ago

I opened a case with TAC and apparently it is some kind of bug.  I use vhba templates in my service...

russ.givens commented on swapping out 2104XP IOM's in Unified Computing 3 years ago

thanks, I will give it a shot.

russ.givens commented on replacing 6120 with 6296 in Unified Computing 3 years ago

So when I swap out the 6120 for the 6296 my fiber channel uplink ports are going to disappear...

russ.givens commented on replacing 6120 with 6296 in Unified Computing 3 years ago

Is there any additional documentation on how to swap out a 6120 with a 6296 other than the...

russ.givens commented on replacing 6120 with 6296 in Unified Computing 3 years ago

I'm looking at the materials that were purchased for this project and I don't see and E16UP...

russ.givens commented on replacing 6120 with 6296 in Unified Computing 3 years ago

Our uplink ethernet ports go into 5Ks, but our SAN connectivity from the expansion modules go...

russ.givens commented on XenServer 6.1 SAN boot on B200M2 in Unified Computing 3 years ago

I'm on 2.0(1t) presently.  Is any version of XenServer supported for booting to SAN on UCS?

russ.givens commented on recommendations for XenServer network configuration on B200M2 in Unified Computing 4 years ago

Now when you say all of the Intel C-States is that just the Processor C State option or is there...

russ.givens commented on vNIC templace change wants to reboot blade in Unified Computing 4 years ago

yeah, already did.  They are saying it is a defect presently.  I'll reply when they have...

russ.givens commented on vNIC templace change wants to reboot blade in Unified Computing 4 years ago

the vNIC template and service profile template are updating templates.It asks for a reboot every...

russ.givens commented on B200 M2 memory inquiry in Unified Computing 4 years ago

Thanks for the reply.  I guess I'm not being clear.  I presently have the configuration where every...

russ.givens commented on driver for N20-AE0002 in Unified Computing 4 years ago

thanks.

russ.givens commented on SAN boot a B200M2 with local disk in Unified Computing 4 years ago

I'm on 2.0.1t and saw the issue prior to me installing an OS.  The alarm disappeared after...

russ.givens commented on creating Windows Service Profile template inquiry in Unified Computing 4 years ago

Thanks for taking the time to answer.  That's what I was looking for.

russ.givens commented on esxi Shared commom memory and UCS B200M2 in Unified Computing 5 years ago

Thanks a lot.  That's what I was looking for.

russ.givens commented on fan module failures in chassis in Unified Computing 5 years ago

1.4(1j)Should have added that to begin with.Thanks

russ.givens commented on failed backup in Unified Computing 5 years ago

very simple answer to my question.  I just deleted the backup job and the fault cleared.

russ.givens commented on inquiry about M71KR-E and Windows in Unified Computing 5 years ago

So that raises a question to me.  How do you configure the two network interfaces.  Typically when...

russ.givens commented on updating UCS Manager from 1.2(1d) to 1.3(1o) in Unified Computing 5 years ago

In the UCSM_GUI_Configuration_Guide_1_3_1.pdf it really doesn't mention that one minor piece of...

russ.givens commented on UCS Manager and using Microsoft Certificate Authority in Unified Computing 6 years ago

That worked very well.  Thanks a lot for the help.  I don't have any certificate errors in my web...

russ.givens commented on UCS Manager and using Microsoft Certificate Authority in Unified Computing 6 years ago

I was trying to do as you suggested, but I guess my problem is I don't see how to get the root and...

Bio












russ.givens's Stats

Points0
Discussion started 38
Answers marked as Correct 0
Endorsed 0
Content Rated 6