Saman.Shamim

Member Since: Jun 11, 2011

English
Saman.Shamim commented on Summarization during Redistribution? in WAN, Routing and Switching 2 years ago

You are correct. I just tested it using GNS3. So IP summary and Redistribute commands can be used...

Saman.Shamim commented on Passive Interface in OSPF process in VRF in LAN, Switching and Routing 2 years ago

Jon,Thanks for your response. jon.marshall wrote:Can i ask why you want to do this ie. what you are...

Saman.Shamim commented on Passive Interface in OSPF process in VRF in LAN, Switching and Routing 2 years ago

Jon, everything you are saying makes sense. I think the confusion is coming from my original...

Saman.Shamim commented on Passive Interface in OSPF process in VRF in LAN, Switching and Routing 2 years ago

So the only way to operate OSPF between a L3 switch and another device is to use L3 ports on L3...

Saman.Shamim commented on L2 Redundancy between Routers and L3 Switches in LAN, Switching and Routing 2 years ago

Thanks for your answer. I'm trying to see if I can secure a pair of stack switches and have a...

Saman.Shamim commented on L2 Redundancy between Routers and L3 Switches in LAN, Switching and Routing 2 years ago

Richards,My understanding is that the Ehterchannel ports on the router should connect to the same...

Saman.Shamim commented on L2 Redundancy between Routers and L3 Switches in LAN, Switching and Routing 2 years ago

Richard, I see one problem with Ether Channel that it will load balance the traffic to both...

Saman.Shamim commented on ASA5510 - Multiple Outside Interfaces in Firewalling 2 years ago

Thanks guys.I have a feeling that the ASA is not connected to the right port on the provider router...

Saman.Shamim commented on VIDEO: Cisco ASA version 8.3 and 8.4 NAT Configuration Example in Firewalling 3 years ago

Video is not working. Tested with IE and Chrome. Don't have Firefox to test with. I believe in was...

Saman.Shamim commented on iBGP or IGP in this design? in WAN, Routing and Switching 4 years ago

Thanks you Joseph and Alessio.In our real world project, the enterprise routers will communicate...

Saman.Shamim commented on Inter-Subnet Roaming with no Layer3 Device? in Getting Started with Wireless 4 years ago

Thanks weterry. Hope the followings help:Why was the original plan for a 2nd WLC to have Management...

Saman.Shamim commented on WLC 4400 Adding static route for service port in Other Wireless - Mobility Subjects 4 years ago

Hi guys,I just did configure the service port on a 5508 controller which i'd like to share it with...

Saman.Shamim commented on LAG not works with ESW Switch in LAN, Switching and Routing 4 years ago

LAG is now up and running! The funny thing is that the GUI makes everything complicated. It took me...

Saman.Shamim commented on LAG not works with ESW Switch in LAN, Switching and Routing 4 years ago

Once the EtherChannel is  configured as on at both  ends of the link, it does not matter if the ...

Saman.Shamim commented on No Inter-VLAN, Just the Internet, Still Layer3 needed? in Getting Started with Wireless 4 years ago

andyirving, I have configured multiple interfaces on the controllers, but instead of using...

Saman.Shamim commented on AP can't join. DTLS connection closed by controller in Getting Started with Wireless 4 years ago

Well, the WLC was a month late (November 1st) !!! Fixed it and now everything is good.Thanks a lot...

Saman.Shamim commented on AP can't join. DTLS connection closed by controller in Getting Started with Wireless 4 years ago

*Nov  1 12:27:24.999: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY*Nov  1 12:27:25.000: %...

Saman.Shamim commented on AP can't join. DTLS connection closed by controller in Getting Started with Wireless 4 years ago

I haven't consoled into AP yet. I'll do it now and post the outputs.First I connected 3 APs and...

Saman.Shamim commented on Multiple AP541s and Data Roaming in Small Business Wireless 4 years ago

Thanks Michael.I really would prefer to use a controller but the client has tight budget.  By the...

Saman.Shamim commented on Switches and Wireless VLANs in Getting Started with Wireless 4 years ago

yes it does, but I was referring to the "Layer 2 Switch" device in the network connected to WLC. I'...

Saman.Shamim commented on Switches and Wireless VLANs in Getting Started with Wireless 4 years ago

Thanks Scott.I got answer to my second question. But still I don't know what a switch does when it...

Saman.Shamim commented on Excluded VLAN on Trunk in LAN, Switching and Routing 4 years ago

They are L2 switches. In regards to the second option, actually those VLANs are wireless VLANs...

Saman.Shamim commented on Excluded VLAN on Trunk in LAN, Switching and Routing 4 years ago

Fabio,VLAN 10 does not exist on SW2 or anywhere esle other than SW1 itself, so there is no need to...

Saman.Shamim commented on Excluded VLAN on Trunk in LAN, Switching and Routing 4 years ago

Just to double-check and make sure my configuration is clear, please take a look at the following...

Saman.Shamim commented on Excluded VLAN on Trunk in LAN, Switching and Routing 4 years ago

By the way am I following a correct logic ine the following? :There is not any other VLAN 30...

Saman.Shamim commented on native VLAN on WLC in Getting Started with Wireless 4 years ago

If I were you, set the wlc vlan to "0" and enter the native vlan 60 command to the trunk port in...

Saman.Shamim commented on native VLAN on WLC in Getting Started with Wireless 4 years ago

f you are setting the wlc vlan to 0 which is untagged, then you need the switchport trunk native...

Saman.Shamim commented on No Inter-VLAN, Just the Internet, Still Layer3 needed? in Getting Started with Wireless 4 years ago

Thanks for your reply.I do want to have separate subnets for each wireless VLAN to break up...

Saman.Shamim commented on PPP Fails in Production Network in WAN, Routing and Switching 4 years ago

SOLVEDAfter being on the line with ADTRAN support for an hour we managed to establish a session...

Saman.Shamim commented on PPP Fails in Production Network in WAN, Routing and Switching 4 years ago

Thanks for the reply vmiller.Here is an update:I swapped ADTRAN with a 1700 series router and...

Saman.Shamim commented on PPP Fails in Production Network in WAN, Routing and Switching 4 years ago

You have no clock source.I think I do:from sh service serial0/1/0 on 2800:Current...

Bio












Saman.Shamim's Stats

Points0
Discussion started 25
Answers marked as Correct 0
Endorsed 0
Content Rated 26