sanjeewa

Member Since: Feb 16, 2004

English
sanjeewa commented on Introduction to IOS XR Multicast in XR OS and Platforms 2 years ago

Better than any book I have read. Thank you for your time.

sanjeewa commented on Issue converting a 881W from LWAPP to Autonomous mode in Getting Started with Wireless 4 years ago

Thank you Laurent, very nice of you to spend time writing that processKind regardsSanjeewa

sanjeewa commented on Unable to get NAT with VRF to internet working in MPLS 7 years ago

Hi Johnny,Can you please follow the configuration as per the doucumentation.http://www.cisco.com/en...

sanjeewa commented on RR hardware platform recomendation in MPLS 7 years ago

It all depends on the scalability. C12K with PRP3/XR has good scalability numbers.

sanjeewa commented on wr erase equivalent in IOS XR in MPLS 7 years ago

try "commit replace"Kind regardssanjeewa

sanjeewa commented on VRF aware IOS ssh client in MPLS 9 years ago

Hi Stefan,Nearly missed your reply :)I shall try my best, the reason this is non-viewable from CCO...

sanjeewa commented on VRF aware IOS ssh client in MPLS 9 years ago

Unfortunatly this feature is not yet available, CSCsa62544 is the ddts you should track, I *THINK*...

sanjeewa commented on LDP Discovery on Multiple Tunnel Interfaces in MPLS 9 years ago

LDP session establish between LDP router-ids, it seems that your problem is due to far end does not...

sanjeewa commented on GSR CSC issue in Metro 9 years ago

Found this thread while looking around, hopefully your problem must have been resolved by now,...

sanjeewa commented on LIB not enabled ............Mean's what ? in MPLS 10 years ago

Need more information1. Is this a P or PE router?, just had to ask since router prompt read as "P...

sanjeewa commented on Route Distinguisher 0:0 !!! in MPLS 10 years ago

Sorry, I was busy with some other issues.Could you please email me [email protected]..

sanjeewa commented on Route Distinguisher 0:0 !!! in MPLS 10 years ago

Hi Maher,There was a change/modification (filed under CSCeh12594) in the code, with that customers...

sanjeewa commented on Route Distinguisher 0:0 !!! in MPLS 10 years ago

Hi Maher,We denied 0:0 for the RD by CSCeh12594, but revert back by CSCei09876 due to customer...

sanjeewa commented on Route Distinguisher 0:0 !!! in MPLS 10 years ago

Hi Sultan,I presume this is a lab router, are you able to reload both routers and publish router...

sanjeewa commented on Fast-reroute: failure detection on ATM in MPLS 10 years ago

Hi David,I believe the book is referring to other interfaces as whole, where software driver is...

sanjeewa commented on customer identification in MPLS 10 years ago

I would answer "by inner label"

sanjeewa commented on TE over ospf virtual-link does not work in MPLS 10 years ago

Although your diagram is bit unclear, I'll try the best.have you noticed that PCALC error ?, no...

sanjeewa commented on MPLS on a Border router in MPLS 10 years ago

Hi,The answers to your specific questions are;Q1 : Can i run MPLS over a Border ISP router which...

sanjeewa commented on Ask for help---a strange issue of MPLS in MPLS 11 years ago

Sorry if I kept you waiting,About packet the packet loss, we need to dig from the basic.1. do you...

sanjeewa commented on Ask for help---a strange issue of MPLS in MPLS 11 years ago

Hi Patrick,I would check the follwoing1. SPEED and DUPLEX, try hard coding in both ends2. Then,...

sanjeewa commented on Need Application based LSPs. L4VPN? in MPLS 11 years ago

Hi Rais,How about creating two TE tunnels and policy routing to one with ftp traffic?RegardsSanjeewa

sanjeewa commented on About AToM (pe to pe) in MPLS 11 years ago

it seems that you are having a control plane problem specific to label setupfrom show l2 mpls vc;...

sanjeewa commented on VRF on a suniterface in MPLS 11 years ago

Yes you can do it;exampleinterface gi 1/0interface gi 1/0.1ip vrf forwarding vrf1interface gi 1/0....

sanjeewa commented on MPLS TE Basics in MPLS 11 years ago

Hi MuriloI have not deployed voice in TE, as I am in a break fix (TAC) unit. Also I have not...

sanjeewa commented on Syslog aware VRF/VPN in MPLS 11 years ago

Hi Sultan,Harold found that CSCdz25899 is not yet integrated in to the production code. Perhaps it...

sanjeewa commented on Syslog aware VRF/VPN in MPLS 11 years ago

Hi Sultan,This feature is made possible with CSCdz25899 - Need to make Syslog Vrf awareIt is...

sanjeewa commented on MPLS TE Basics in MPLS 11 years ago

Good luck with your studies; I will give you my perspective of your questions. Since your questions...

sanjeewa commented on Multilink in MPLS in MPLS 11 years ago

Yes, you can bundle all three links and create a MLP bundle.However please be aware of negative...

sanjeewa commented on MPLS support Rtp Header Compression ?? in MPLS 11 years ago

In tag2tag we are not dealing with IP, just switching MPLS, In other words your voice packet is now...

sanjeewa commented on MPLS support Rtp Header Compression ?? in MPLS 11 years ago

YES, RTPHC is supported in PE/CE link (ip2tag switching), this works well with later 12.3 code....

sanjeewa commented on VRF-to-VRF, CE-to-PE in MPLS 11 years ago

Conceptually "vrf selection" feature might help youPlease refer to;http://www.cisco.com/en/US/...

sanjeewa commented on Sham link in MPLS 11 years ago

HiRegrets, I missed your update since it was very late night in Sydney.If you need to import/export...

sanjeewa commented on Sham link in MPLS 11 years ago

I think your LSP is broken !can you verify least tag-switching is configured in the mpls core...

sanjeewa commented on Sham link in MPLS 11 years ago

Your sham-link source and destination loopbacks should be learn *ONLY* from the ibgp not from the...

sanjeewa commented on Does Cisco supports PW session between PEs connected back to back ?? in MPLS 11 years ago

Hi Vikas,Please cut and paste the following (both routers) and attach the output to the thread.show...

sanjeewa commented on cRTP over MPLS in MPLS 11 years ago

I have not seen cRTP in MPLS core, and I cannot think of a reason either :)However cRTP is very...

sanjeewa commented on BGP problem in Other Network Infrastructure Subjects 11 years ago

Hi,Please disregard this post if someone allready suggested the following, I would get the...

sanjeewa commented on Static route and default route configuration in Other Network Infrastructure Subjects 11 years ago

Yes, you can replace all three static routes with one default route in Router C

sanjeewa commented on Static route and default route configuration in Other Network Infrastructure Subjects 11 years ago

Yes, I was a typo mistake.should read as "Suppose you had a route to 192.168.2.0 via 172.20.20.6",...

sanjeewa commented on Static route and default route configuration in Other Network Infrastructure Subjects 11 years ago

Well, not really. I will correct it with followingThis is what you should keep in mind.every router...

sanjeewa commented on Static route and default route configuration in Other Network Infrastructure Subjects 11 years ago

Based on what you said, you are missing a route to 192.168.2.0/24 in router Ce.g.show ip route 192....

sanjeewa commented on MPLS : NOT ABLE TO OPEN SOME SITE in MPLS 11 years ago

Hopefully following method would help you to find the problem.1. This was a working configuration...

sanjeewa commented on MPLS versus Switched network in MPLS 11 years ago

Hi about the second question;you have a "access-list rate-limit 0" command in your configurationand...

Bio












sanjeewa's Stats

Points20
Discussion started 0
Answers marked as Correct 0
Endorsed 0
Content Rated 2