sayeedibrahim

Member Since: Dec 27, 2009

English
sayeedibrahim's Activity on Cisco Support Community
Currently displaying 50 results

sayeedibrahim has created 9951 IP phone registration problem

1 year 2 months ago
HiWill appreciate if you can guide me here:1. 9951 phones working fine with...

sayeedibrahim has created 9951 IP phone registration problem

1 year 2 months ago
HiWill appreciate if you can guide me here:1. 9951 phones working fine with...

sayeedibrahim has commented on Can latest SRST version be used with CUCM V5.1.3

1 year 6 months ago
Thanks all for sharing your knowledge on this topic.Our cisco account manager...

sayeedibrahim has commented on Can latest SRST version be used with CUCM V5.1.3

1 year 7 months ago
Hi AmanThnx for a quick reply. After reading the following posts I understood...

sayeedibrahim has created Can latest SRST version be used with CUCM V5.1.3

1 year 7 months ago
HiOne of my client uses CUCM V5.1.3 and now needs SRST to be deployed for them...

sayeedibrahim has commented on Softkeys not working on IP phones

1 year 10 months ago
Yes 'MTP Required option" was checked. The issue got resolved when i unchecked...

sayeedibrahim has commented on Softkeys not working on IP phones

1 year 10 months ago
Hi ChrisThanks for the suggestion. I will check and confirm on that.

sayeedibrahim has created Softkeys not working on IP phones

1 year 10 months ago
HiI will appreciate support for a situation I have encountered for one customer...

sayeedibrahim has commented on Remote Span with C2960

2 years 2 months ago
Thanks Reza.

sayeedibrahim has created Remote Span with C2960

2 years 2 months ago
HiI am trying to configure RSPAN for one of my client. They have Server-Client...

sayeedibrahim has commented on Does CUE loose the licenses if I reset it to factory default?

2 years 3 months ago
Thanks Chris.Would it be ok, if i replace the old CUCME IP with new CUCME IP...

sayeedibrahim has created Does CUE loose the licenses if I reset it to factory default?

2 years 3 months ago
HiSite A- CUCME + CUESite B - CUCMECUE from Site A to be pulled out and used at...

sayeedibrahim has created Smartnet Contract for ASR IOS upgrade

2 years 5 months ago
HiI want to upgrade the IOS for one ASR device. I cannot downlaod the latest...

sayeedibrahim has created CUCM BackUP & Restore

2 years 7 months ago
HiI would like to know the recomended methods for back up and restore of cucm...

sayeedibrahim has commented on Switchport Configurations for using Astra IP Phone and Ericsson IP PABX

2 years 7 months ago
just to update. I could not succeed in making the phone and PC work with...

sayeedibrahim has commented on ISIS with large MTU size

2 years 7 months ago
Hi Thanks for the suggestions. I have got 7206 VXR at both ends. Below is how...

sayeedibrahim has created ISIS with large MTU size

2 years 7 months ago
HiI will appreciate recomedations and suggestions to help me configure and run...

sayeedibrahim has commented on Switchport Configurations for using Astra IP Phone and Ericsson IP PABX

2 years 8 months ago
I believe i need to use the following on the trunk port between the switches:...

sayeedibrahim has created Switchport Configurations for using Astra IP Phone and Ericsson IP PABX

2 years 8 months ago
HiCould anyone help to provide me with switchport configuration for using Astra...

sayeedibrahim has commented on Can we still place order for NM cards to get CUE features

2 years 10 months ago
@Paolo - Thanks for the information.

sayeedibrahim has created Can we still place order for NM cards to get CUE features

2 years 10 months ago
HiI would like to know if we can still place order for NM cards to get...

sayeedibrahim has commented on ATA 187 does not register with SRST-CME router at branch office

2 years 11 months ago
Ok..ATA is now registered. I can see the ATA is now registering and taking the...

sayeedibrahim has created ATA 187 does not register with SRST-CME router at branch office

2 years 11 months ago
HiI have a centralized IP Telephony model deployed for a client with CUCM v8.5...

sayeedibrahim has commented on CUE DTMF ISSUE

2 years 11 months ago
@aokanlawonThanks for your suggestion. It helped me solve my problem. The...

sayeedibrahim has commented on CUE DTMF ISSUE

2 years 11 months ago
Thanks for your suggestions @Chris, Joe...

sayeedibrahim has created CUE DTMF ISSUE

2 years 11 months ago
HiOne of our client has C2911 router with CME. The telephony ver is 8.8.We...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 1 month ago
HiCheck this discussion. Hope it helps anyone looking for a similar answer or...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 1 month ago
HiCheck this discussion. Hope it helps anyone looking for a similar answer or...

sayeedibrahim has commented on Netflow & Flexible Netflow

3 years 1 month ago
Hi KarimThanks for the clarification.RIbrahim SAYEED

sayeedibrahim has commented on Netflow & Flexible Netflow

3 years 1 month ago
Hi KarimThanks for the clarification.RIbrahim SAYEED

sayeedibrahim has created Netflow & Flexible Netflow

3 years 1 month ago
HiI recently came to know that we need netflow services card (WS-F4531) for...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 1 month ago
Hey GuysCheck out this linkhttp://www.cisco.com/en/US/prod/collateral/iosswrel/...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 1 month ago
Hey GuysCheck out this linkhttp://www.cisco.com/en/US/prod/collateral/iosswrel/...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Thanks a lot guys for your support. RIbrahim SAYEED

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Thanks a lot guys for your support. RIbrahim SAYEED

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Thanks Guys. Appreciate ur support. So now once I  get this service card...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Thanks Guys. Appreciate ur support. So now once I  get this service card...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Is it mandatory to have a NetFlow Service Card installed in the switch to use...

sayeedibrahim has commented on NetFlow Command Support on C4503

3 years 3 months ago
Is it mandatory to have a NetFlow Service Card installed in the switch to use...

sayeedibrahim has created NetFlow Command Support on C4503

3 years 3 months ago
HiI am trying to use the following commands on the switch but it is not...

sayeedibrahim has commented on Call Center Custom Layout

3 years 4 months ago
HiCan you let me know how i can write script to collect for example a case id...

sayeedibrahim has created UCCX Recording Feature

3 years 5 months ago
HiI have a premium version of IPCCX installed in my office. I need to know if...

sayeedibrahim has commented on UCCX Upgrade

3 years 5 months ago
Hi GajananI have not  done the CUC part before however I had read about it. Let...

sayeedibrahim has commented on UCCX Upgrade

3 years 5 months ago
Hey guys thnx for the explanations. Made a blunder with subject . should have...

sayeedibrahim has created UCCX Upgrade

3 years 5 months ago
HiNeed suggestions guys for below scenario:One of my clients has a Centralized...

sayeedibrahim has commented on Call Center Custom Layout

3 years 5 months ago
Unforutnately got busy with another project all week. Hopefully will get chance...

sayeedibrahim has created Call Center Custom Layout

3 years 5 months ago
HiI want to call a customized layout instead of default layout in Cisco Agent...

sayeedibrahim has commented on UCCX 8.0(2) CAD layout

3 years 5 months ago
Hi GuysI am stuck with a similar problem. Will appreciate your suggestions to...

sayeedibrahim has commented on DB Read Step

3 years 6 months ago
HiMy requirement was met when I used stored procedure instead of the query...

sayeedibrahim has created DB Read Step

3 years 6 months ago
HiHow can I run a query with DB read step in UCCX to fetch information from DB...

Bio












sayeedibrahim's Stats

Points5
Discussion started 28
Answers marked as Correct 0
Endorsed 0
Content Rated 19