Edward Luna

Member Since: Feb 05, 2012

English
Edward Luna commented on Allow Internet access while connected thru AnyConnect to ASA5510 in VPN 4 years ago

Thank you for your quick response.  I'll give it a try.

Edward Luna commented on Anyconnect VPN log in failure in VPN 4 years ago

After I made the post I came to the same conclusion.  Rather than take-up time with what is likely...

Edward Luna commented on second ASA5510 for development work in Firewalling 4 years ago

Thank you JenniferYour instructions were crystal clear and right on the money.  ASDM is up and...

Edward Luna commented on second ASA5510 for development work in Firewalling 4 years ago

JenniferPlease excuse my ignorance but I have no idea how to copy the asdm image to flash.  Some...

Edward Luna commented on second ASA5510 for development work in Firewalling 4 years ago

Sorry I took so long to get back to you.  Here are the two listings you requested.Thanks again.Ed...

Edward Luna commented on FTP packets being dropped in Firewalling 4 years ago

Yes... passive FTP.

Edward Luna commented on FTP packets being dropped in Firewalling 4 years ago

Hello JenniferAccording to the activity monitor on the FTP server, the initial connection is...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

I would like to take a moment to thank everyone for their help in solving this problem.  It turns...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

Support said I needed to create a static route between 192.168.2.0 and 10.1.1.0 which I did.  Not...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

Nothing I've tried so far has worked.  I'm on the phone with system support right now.  I'll let...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

I think we've made some progress.  I changed the VPN address pool to 192.168.1.0/24... I left the...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

I apologize for being so dense but I just don't understand the answers I'm getting.  I'm certain it...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

I changed the VPN address pool and it didn't make any difference.1.  Can I/should I use addresses...

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

Am I correct in assuming that the client computer once connected to the Cisco VPN is using a 10.1....

Edward Luna commented on Question about ASDM through VPN in VPN 4 years ago

Thank you for your quick response.My remote vpn address pool is 10.1.1.100 to 10.1.1.120     I...

Edward Luna commented on Managing ASA5510 using ASDM via internal interface in Firewalling 4 years ago

I will gladly rate... your answers are always very helpfull.  Now if I only knew how to rate we'd...

Edward Luna commented on Managing ASA5510 using ASDM via internal interface in Firewalling 4 years ago

oops... I just thought of something.RWW connects to the SBS 2008 via HTTPS (port 443)The add...

Edward Luna commented on Managing ASA5510 using ASDM via internal interface in Firewalling 4 years ago

Thanks for the fast reply.I was thinking that I might use remote administration to my Small...

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

Success!Customer support never got back to me but by using the information you supplied I was able...

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

Thanks for your reply.I contacted customer support... they asked for a copy of the config and I...

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

Thank you for your reply.At the risk of sounding like a compete novice... (which I am)  I am using...

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

Somebody must know. 

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

Result of the command: "show running-config": Saved:ASA Version 8.2(5) !hostname ciscoasadomain-...

Edward Luna commented on New Install anyclient VPN on ASA5510 can't connect. in VPN 4 years ago

OK... I will be in the office later this afternoon and I will post the config.  (I'm in the...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

I got it working.I'm not certain exactly what did it because I added several changes all at once....

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

I removed the ASA5510 and substituted a Linksys router... with that the external email began to...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Well... I've tried just about everything I can think of and nothing I do will allow me to access...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

ManishI must leave the office now... I greatly appreciate all your help.  I'll will work with the...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

I am seeing messages in the ASDM syslog about port 443.  I think 443 is used for ssl and access to...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Result of the command: "packet-tracer input Internet tcp 4.2.2.2 23453 96.56.127.171 25 detailed"...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Result of the command: "show access-list"access-list cached ACL log flows: total 0, denied 0 (deny-...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Here it is...Result of the command: "packet-tracer input Internet tcp 4.2.2.2 23453 96.56.127.171...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Just in case it makes a difference... I have only one NIC card in the mail server and therefore...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Yes I can get to the mail server from inside the firewall on the private network just fine.I hadn'...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Well... no joy... I still can't get through the Cisco asa5510 from the outside.All mail functions...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

I changed the static commandfrom.... static (Internal,Internet) tcp interface Internet smtp 10....

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

error on second static command... Invalid Hostname

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

I tried the commands above but I still don't have access. I can ping the mail server ip (which is...

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Thanks a million.I'll try it as soon as I get to the office in the morning.Thanks again.Ed

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Thank you so much... that will be very helpful.Private ip of server is 10.1.1.2Exteral ip is 96.56....

Edward Luna commented on ASA5510 how to open port 25 in Firewalling 4 years ago

Hello guysSorry... but I am totally lost.  I have read everything I can find... and I've watched...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

MikeI got it working by entering the following on the command line...  route internet 0 0...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

Hello MikeI changed back to DHCP (but I can't run that way in production) and ran a Show Route...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

MikeOk... I see it.  It shows 0.0.0.0.0.0.0.0[1/0] via xx.xx.xx.xx (my external IP address) It aslo...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

MikeI rolled back to DHCP for the external interface and my Internet access is working. However, I...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

MikeSo sorry... I never thought to look in tools.  Now I see how to get to a command line.  Thanks...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

MikeI understand what you want me to do but unfortunately I have no idea how to get to an ASA...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

Thanks for your response.I can't establish a telnet session.  Is it possible that the telnet port...

Edward Luna commented on ASA 5510 with a SSM-10 in Firewalling 4 years ago

Hi MikeThank you for your response.I'm afraid I don't know how to change the IP address of the SSM...

Bio












Edward Luna's Stats

Points0
Discussion started 10
Answers marked as Correct 0
Endorsed 0
Content Rated 8