stefan.angerer

Member Since: Jan 06, 2005

English
stefan.angerer commented on 8.0 MR1 Beta Availability in Other Wireless - Mobility Subjects 2 years ago

Hi Javier,the link above didn't work for me, I had to manually change to https for reaching the...

stefan.angerer commented on What attributes are shared between a Radius Server and a WLC? in Security and Network Management 2 years ago

Hi Robin,you need to send the "service-type" atttribute to the controller.value "administrative" =...

stefan.angerer commented on CWA hanging over FlexConnect in Security and Network Management 3 years ago

Jon,maybe this document helps (just in case you don't already know it):http://www.cisco.com/en/US/...

stefan.angerer commented on Override centrally switched WLAN in Security and Network Management 3 years ago

The key is to use IDs > 16 so your SSIDs won't cause issues in the default group.When...

stefan.angerer commented on Override centrally switched WLAN in Security and Network Management 3 years ago

Sven,you can do this by configuring additional WLAN Profiles which contain the same SSIDs like your...

stefan.angerer commented on EAP-TLS Authentication with FlexConnect and RADIUS in Security and Network Management 3 years ago

Hi Tobias,you need to enable FlexConnect Local Authentication on the SSID (advanced settings)....

stefan.angerer commented on 802.11 Association Status, 802.11 Deauth Reason codes in Other Wireless - Mobility Subjects 3 years ago

@Andrew: AID stands for Associantion ID - a unique number, given by the AP to the client after a...

stefan.angerer commented on Changing metric unit in Prime Infrastructure in Security and Network Management 3 years ago

Hi,if you want to change the unit for your site maps, you can do it here: Go to "Site Maps"pick "...

stefan.angerer commented on How to get the NCS trial licenses in Other Wireless - Mobility Subjects 3 years ago

Seems that they removed the NCS trial from the list of available demo licenses.Anyway, why do you...

stefan.angerer commented on Cant add MSE 7.4 to NCS 1.2 in Security and Network Management 3 years ago

Hi Mark,MSE 7.4 is not supported with NCS 1.2 - maybe this causes your issues?Check this link for a...

stefan.angerer commented on Prime Infrastructure 2.1, MSE & 5508 Controllers in Other Wireless - Mobility Subjects 3 years ago

Your combination of PI (are you sure it's 2.1? not 1.2?), WLC and MSE is not supported.You may want...

stefan.angerer commented on Restricting SSIDs using Win2008 Radius Servers in Security and Network Management 3 years ago

HiI had similar requirements in many installations, usually one of these two options satisfied the...

stefan.angerer commented on WAP 321 NPS in Security and Network Management 3 years ago

Hi,go to your NPS/IAS, edit your RADIUS client configuration, clear the "Request messages must...

stefan.angerer commented on Virtualized WLC + Prime + MSE solution in Other Wireless - Mobility Subjects 3 years ago

Same situation here, guess it's a vWLC issue.It works with my 5500 ...Thanks for your reply!Stefan

stefan.angerer commented on WLC SSO Authentication with Internet Proxy in Security and Network Management 3 years ago

Maybe you it helps to use external web authentication, and combine that with your proxy...

stefan.angerer commented on Retrieve Deleted WLAN from an NCS backup in Security and Network Management 3 years ago

I agree with Scott - try to rebuild the SSID, there are not too many directions where you can go...

stefan.angerer commented on Virtualized WLC + Prime + MSE solution in Other Wireless - Mobility Subjects 3 years ago

Hi Marcocould you find a solution for that? I'm facing exactly the same issue.regardsStefan

stefan.angerer commented on WLC 2504 interfaces and Guest networks in Security and Network Management 3 years ago

Hi Adam,you can create an ap manager interface, but during the join process the APs will also need...

stefan.angerer commented on 1310 LAP unable to join WLC 5508 in Other Wireless - Mobility Subjects 3 years ago

Usually the release notes keep saying that it is not supported, but actually I never had a problem...

stefan.angerer commented on Retrieve Deleted WLAN from an NCS backup in Security and Network Management 3 years ago

Ok - but from my point of view the NCS backup won't help here, since it does not include the WLC...

stefan.angerer commented on Retrieve Deleted WLAN from an NCS backup in Security and Network Management 3 years ago

you are saying that this WLAN was running on one of your controllers - is it still configured on...

stefan.angerer commented on 1310 LAP unable to join WLC 5508 in Other Wireless - Mobility Subjects 3 years ago

If you only have legacy APs (basically all except 1600, 2600,3600) then you could downgrade to 7.0....

stefan.angerer commented on Retrieve Deleted WLAN from an NCS backup in Security and Network Management 3 years ago

Eric,do you only have NCS backups, or WLC backups as well?Stefan

stefan.angerer commented on 1310 LAP unable to join WLC 5508 in Other Wireless - Mobility Subjects 3 years ago

It depends on the number of APs, but maybe if you have just a few of the 1300s, maybe you could run...

stefan.angerer commented on 1310 LAP unable to join WLC 5508 in Other Wireless - Mobility Subjects 3 years ago

Ahmed,on which code version is your 5500 running?The 1300 bridges are only supported until 7.0.x as...

stefan.angerer commented on CISCO NCS with ACS 5.x in Security and Network Management 3 years ago

Sorry, I'm not aware of any possibility to add a suffix to a username with ACS5.(I was thinking of...

stefan.angerer commented on CISCO NCS with ACS 5.x in Security and Network Management 3 years ago

What RADIUS server do you have in place? (ACS4/5, NPS?)regardsStefan

stefan.angerer commented on CISCO NCS with ACS 5.x in Security and Network Management 3 years ago

Ben,since I don't know your environment this is maybe a stupid questions - but is there a specific...

stefan.angerer commented on WCS Lobby Ambassador with AD credentials - editing guest defaults in Security and Network Management 3 years ago

Hi,please have a look at this thread: https://supportforums.cisco.com/message/3818605Maybe this is...

stefan.angerer commented on Can not do radius authentication via WLC 4400... Please help! in Security and Network Management 3 years ago

Can you post some screenshot of your NPS configuration?Also verify in the nps log messages that you...

stefan.angerer commented on Cisco AP 1140 integrating with Hotspot Gateway in Other Wireless - Mobility Subjects 3 years ago

I agree with George, without knowing what hotspot product you plan to implement and how it works,...

stefan.angerer commented on CISCO NCS with ACS 5.x in Security and Network Management 3 years ago

The password in the NCS doesn't matter at all! Choose any password you like.

stefan.angerer commented on CISCO NCS with ACS 5.x in Security and Network Management 3 years ago

you can create a local user in NCS that has exactly the same username as your user account in the...

stefan.angerer commented on CISCO ANCHOR WLC LOBBY AMBASsADOR VIA ACS 5.x in Security and Network Management 3 years ago

Hi,check this thread, it explains what you want to achieve:https://supportforums.cisco.com/docs/DOC...

stefan.angerer commented on mDNS and 7.4 directory Services in Other Wireless - Mobility Subjects 3 years ago

Specifying the WLAN ID is a feature that will (finally) be adressed in the upcoming release of...

stefan.angerer commented on mDNS and 7.4 directory Services in Other Wireless - Mobility Subjects 3 years ago

Hi,you can use mDNS profiles on an AP group level if you do a little trick: simply create two (or...

stefan.angerer commented on Dynamic vlan assignment with 1242AG and IAS not working in Security and Network Management 3 years ago

Jason,I have found two configuration in my template archives - one is doing dynamic vlan with the...

stefan.angerer commented on Dynamic vlan assignment with 1242AG and IAS not working in Security and Network Management 3 years ago

Hi Jason,I quickly compared your config to one of my mine, looks pretty the same.Sounds stupid, but...

stefan.angerer commented on Dynamic vlan assignment with 1242AG and IAS not working in Security and Network Management 3 years ago

One more thing: You need to add aaa authorization network default group rad_eapto your...

stefan.angerer commented on Dynamic vlan assignment with 1242AG and IAS not working in Security and Network Management 3 years ago

Yes, I use dynamic VLANs with autonomous APs. Is the radius server sending vlan names or numbers?do...

stefan.angerer commented on Dynamic vlan assignment with 1242AG and IAS not working in Security and Network Management 3 years ago

Hi Jason,in which VLAN is your IAS actually trying to put the client in?Please be aware that you...

stefan.angerer commented on MSE VA failing to start in Other Wireless - Mobility Subjects 3 years ago

I faced similar issues with my virtual MSE - I was able to resolve them by changing the vm nic's...

stefan.angerer commented on Access point and Switch configuration for EAP in Security and Network Management 3 years ago

In that case it's not necessary and even not possible to use dot1x on the switchport.just enable it...

stefan.angerer commented on Access point and Switch configuration for EAP in Security and Network Management 3 years ago

Hi,just follow the link from my previous post, it will lead to another thread on this forum where a...

stefan.angerer commented on Cisco Aironet 1600 in Other Wireless - Mobility Subjects 3 years ago

The data sheet says "Cisco Unified Wireless Network Software (available in Q4CY12)" (http://www....

stefan.angerer commented on Cisco Aironet 1600 in Other Wireless - Mobility Subjects 3 years ago

1600 series APs need WLC code 7.4, which is still beta and therefore not on CCO yet.But since the...

stefan.angerer commented on Access point and Switch configuration for EAP in Security and Network Management 3 years ago

Hi,if you are using a wlan controller, and you have a radius server that allows to use EAP-FAST (...

stefan.angerer commented on How to set up secondary WLC for all APs at once? in Other Wireless - Mobility Subjects 3 years ago

Hi Peter,bulk configuration of APs (e.g. setting primary/secondary controller) is a WCS/NCS/Prime...

Bio












stefan.angerer's Stats

Points149
Discussion started 3
Answers marked as Correct 20
Endorsed 0
Content Rated 0