s.vosper

Member Since: Nov 29, 2007

English
s.vosper's Activity on Cisco Support Community
Currently displaying 50 results

s.vosper has commented on Apple iOS Version 7 bad roaming

1 year 4 months ago
LeeWe have tested with an iOS 6.x device. With 6.x the ipad responds very...

s.vosper has commented on Apple iOS Version 7 bad roaming

1 year 4 months ago
ScottThanks, appreciate the input

s.vosper has commented on Apple iOS Version 7 bad roaming

1 year 4 months ago
I dont not have a Cisco WLC but we are working a wireless controller...

s.vosper has created Apple iOS Version 7 bad roaming

1 year 4 months ago
HiHas anyone experienced problems with the Apple devices and fast secure...

s.vosper has commented on Configuring physical WLC ports for egress of Guest traffic.

1 year 11 months ago
THanks guys. I very much appreciate both of your input.RegardsSimon

s.vosper has commented on Configuring physical WLC ports for egress of Guest traffic.

1 year 11 months ago
Thanks for the reply ScottCould you point me to some docs on how this is done...

s.vosper has created Configuring physical WLC ports for egress of Guest traffic.

1 year 11 months ago
Hi AllCould some body please tell me if its possible or indeed advisable to...

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
Thanks George I will check it out. Unfortunately the customer wants N in the...

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
I have the 6dBi patch antenna Scott. My problem is, all of the APs will be on...

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
Sorry 6dBi is the patch I am using. The yagi would be 10, so I would deploy the...

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
THats for the 5GHz. 2.4GHz I plan to deploy at 11dBm.

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
The antenna is 6 dBi and I was planning to deploy the AP at 14dBm.

s.vosper has commented on 5GHz 11N Yagi

2 years 4 months ago
Thanks GeorgeThis is written in the Atenna Portfolio document:Patch and Yagi...

s.vosper has created 5GHz 11N Yagi

2 years 4 months ago
Hi AllIs there a yagi that I can use to provide 11N coverage within some...

s.vosper has commented on MSE not responding

2 years 10 months ago
Hi guysScott - Thanks for responding. I have tried the things you have...

s.vosper has created MSE not responding

2 years 10 months ago
  Hi allI am currently having trouble adding an MSE to NCS.I get a message from...

s.vosper has commented on Cisco 3502i Question

3 years 2 months ago
Anybody know whats happening here? Half the posts have gone from this thread...

s.vosper has commented on Cisco 3502i Question

3 years 2 months ago
Anybody know whats happening here? Half the posts have gone from this thread...

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Great news

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Great news

s.vosper has commented on Connectivity problem after adding a second WLC

3 years 2 months ago
BobHave you checked to make sure you don't have any IP address duplications...

s.vosper has commented on Connectivity problem after adding a second WLC

3 years 2 months ago
BobHave you checked to make sure you don't have any IP address duplications...

s.vosper has commented on Access Point(s) "Frozen"

3 years 2 months ago
Hi ThomasWhats the update from Cisco? I am keen to understand what the problem...

s.vosper has commented on Access Point(s) "Frozen"

3 years 2 months ago
Hi ThomasWhats the update from Cisco? I am keen to understand what the problem...

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Re-post if this solves the slow ping responce.Dont forget to rate

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Re-post if this solves the slow ping responce.Dont forget to rate

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Yes I have the QL420 + printers working with 5508 WLC and 3502E CAPWAP APs and...

s.vosper has commented on Zebra QL420 Printer using PEAP (Verisign Certs)

3 years 2 months ago
Yes I have the QL420 + printers working with 5508 WLC and 3502E CAPWAP APs and...

s.vosper has commented on Cisco 3502i Question

3 years 2 months ago
I am currently doing an implementaion of 39 3502E's and I have had no less than...

s.vosper has commented on Cisco 3502i Question

3 years 2 months ago
I am currently doing an implementaion of 39 3502E's and I have had no less than...

s.vosper has created TDR Failing

3 years 2 months ago
HelloI am trying to run TDR tests on a 3750G (ver12.2). The switch ports have...

s.vosper has commented on Access Point(s) "Frozen"

3 years 2 months ago
GeorgeFunny you should say this as, this morning I have come on here looking...

s.vosper has commented on Access Point(s) "Frozen"

3 years 2 months ago
GeorgeFunny you should say this as, this morning I have come on here looking...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
JustinA colleague has helped me get the accounting to work.Thank you very much...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
JustinA colleague has helped me get the accounting to work.Thank you very much...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
BINGO!!The RADIUS type field of the failed attempts was "AccountingRequest". I...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
BINGO!!The RADIUS type field of the failed attempts was "AccountingRequest". I...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinLooking at the details for the passed and failed attempts I am...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinLooking at the details for the passed and failed attempts I am...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinNone of the active access services have authorization policies...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinNone of the active access services have authorization policies...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinI have re-configured the ACS to follow what you suggested and I still...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinI have re-configured the ACS to follow what you suggested and I still...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinThanks again for taking the time out to help with this.Here is the...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 2 months ago
Hi JustinThanks again for taking the time out to help with this.Here is the...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 3 months ago
The client device re-authenticates every 30 mins by design, but the successful...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 3 months ago
The client device re-authenticates every 30 mins by design, but the successful...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 3 months ago
Hi JustinThank you for posting. The clients are a bit of a mixure. There are...

s.vosper has commented on Per SSID authentication on ACS 5

3 years 3 months ago
Hi JustinThank you for posting. The clients are a bit of a mixure. There are...

s.vosper has created Constant 11019 Selected DenyAccess Service, despite users connecting

3 years 3 months ago
HelloI have configured on ACS 5.2 some access policies that inspect the radius...

Bio












s.vosper's Stats

Points8
Discussion started 13
Answers marked as Correct 0
Endorsed 0
Content Rated 6