thisisshanky

Member Since: May 05, 2001

English
thisisshanky commented on [Question] BE6K for CWMS with CUWL Pro? in Conferencing 1 year ago

it should be included in the PRO seats

thisisshanky commented on CME forced auth codes in 8.5/8.6 in IP Telephony 3 years ago

yes you can

thisisshanky commented on VCS Starter Pack Express question in Video Over IP 4 years ago

With the base VCS starter pack it can definitely use local provisioning to make Movi work, but as...

thisisshanky commented on Call Routing CCM 4.3 in IP Telephony 4 years ago

CUCM traces...

thisisshanky commented on EOL documentation in IP Telephony 4 years ago

All MCSses regardless will be/should be gone soon...

thisisshanky commented on Cannot set up conference calls in IP Telephony 4 years ago

So does it work after the first time? Does the phones in question have a MRG/MRGL with a conf...

thisisshanky commented on Cisco 4507 to HP 5400 VL in LAN, Switching and Routing 4 years ago

The switches are right next to each other and distance is not an issue. Also the direct attached...

thisisshanky commented on Cisco 4507 to HP 5400 VL in LAN, Switching and Routing 4 years ago

It doesnt error disable but it shows down/down.So i tried usinga Cisco SFP+ twinax cable and the...

thisisshanky commented on CME forced auth codes in 8.5/8.6 in IP Telephony 5 years ago

wow thats a great find, i was wondering how to do that...good to know..

thisisshanky commented on CME forced auth codes in 8.5/8.6 in IP Telephony 5 years ago

You are right JohnI did notice the same problem with the customer and right now as we speak we...

thisisshanky commented on CME forced auth codes in 8.5/8.6 in IP Telephony 5 years ago

Did you re-record the wave files properly in the g711ulaw 8bit mono  format...when the file formats...

thisisshanky commented on Meet-me number and FAC? in IP Telephony 5 years ago

First off, the meetme bridge has to be started by the host, which i assume you understand is a...

thisisshanky commented on Doubt about license FL-CUE in IP Telephony 5 years ago

when you buy a module like CUE it comes with some default ports (like 6 or 8 dont remember) so you...

thisisshanky commented on CUCM 8.5 with Polycom SIP phones in IP Telephony 5 years ago

i would think this should work because option 150 nor 66 has nothing to do with Callmanager. Its...

thisisshanky commented on forward busy on both internal and external calls in IP Telephony 5 years ago

yes you need to set a calling search space that has access to the partition in which 24522 lies....

thisisshanky commented on UCCX 8.5 DNS Mandatory... Why? in IP Telephony 5 years ago

ChristosSo to summarize this issue, do we enable DNS or no...? Is there any documentation on what...

thisisshanky commented on MGCP gateway IOS upgrade in IP Telephony 5 years ago

You dont absolutely have to but its generally recommended. i typicaly put the latest T train as...

thisisshanky commented on CUCM licenses issue in IP Telephony 5 years ago

Ankita,Since this is an upgrade you need to get the Software upgrade license pak registered with...

thisisshanky commented on iPhone Cisco Mobile 8.1 - Initiate MeetMe Conference in IP Telephony 5 years ago

unless there is a meetme softkey you cant start it..so i think my answer would be a no.

thisisshanky commented on Unable to update Service Parameters CUCM8.5.1.11900-21 in IP Telephony 5 years ago

Like Bill suggested, trying using different browser, i have seen that certain browsers are not...

thisisshanky commented on CUCM 4.2 and Above DLU mandatory in IP Telephony 5 years ago

Nouman,Please read this faqhttp://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556...

thisisshanky commented on CUCM 6.0 settings dont take until reboot in IP Telephony 5 years ago

so the data u change does get stored in the db, but it looks like none of these changes get pushed...

thisisshanky commented on upgrade guide from CUCM 5.1.3 to 7.1.x then to 8.0(2) in IP Telephony 5 years ago

i would vote for option 1. you will have the flexibility of checking the upgrade in the 5.x system...

thisisshanky commented on Asterisk to CME Calling Issue in IP Telephony 5 years ago

Tracey try putting the incoming called-number patterns at the top (reorder the dial peers)......

thisisshanky commented on Upgrade to CME 7.1 in IP Telephony 5 years ago

Also keep in mind that you ll need to change the contents of the flash such as GUI files..you can...

thisisshanky commented on call drop on MGCP GW in IP Telephony 5 years ago

its an IOS bug, i dont remember ...its been a while..

thisisshanky commented on Help required in CUBE configuration in IP Telephony 5 years ago

are the transcoding sessions /. profile you defined registered to the cme router ? sh sccp  should...

thisisshanky commented on call drop on MGCP GW in IP Telephony 5 years ago

you do need the command, "no mgcp timer receiver-rtcp".typically i would recommend adding ccm-...

thisisshanky commented on Automatically download Exported user data to re-import to AD in IP Telephony 5 years ago

James,How many users are we talking about ? For starters you can export the user extensions and use...

thisisshanky commented on call drop on MGCP GW in IP Telephony 5 years ago

what does your mgcp config look like ? do you hve this issue consistently with other calls ?did you...

thisisshanky commented on Cisco Mobile Aplications Help in IP Telephony 5 years ago

i think you have to upgrade your CUCM version first inorder to support this. I use the Cisco Mobile...

thisisshanky commented on Voicemail Light Indicator for Hunt Group in IP Telephony 5 years ago

one way to do this is to create a second line on all phones and label that extension as Service...

thisisshanky commented on Music On Hold - Interesting Question in IP Telephony 5 years ago

it should try it..

thisisshanky commented on Music On Hold from 2951 router in IP Telephony 5 years ago

there isnt any load on the router other than the router simply streaming mOH traffic. when basic ip...

thisisshanky commented on Polycom IP6000 register to Call Manager 7.1 in IP Telephony 5 years ago

try adding it as a 3rdparty sip phone..i m pretty sure u might need a sip digest user...

thisisshanky commented on Music On Hold - Interesting Question in IP Telephony 5 years ago

just uncheck that box then it will always connect to the start of the music.i would enable...

thisisshanky commented on Music On Hold - Interesting Question in IP Telephony 5 years ago

i believe your setting is play continuously and set to multicast...the advantage is that it assumes...

thisisshanky commented on CUE Module with zero Disk Space in IP Telephony 5 years ago

can you do a sh inventory and tell the exact part...

thisisshanky commented on CUE Module with zero Disk Space in IP Telephony 5 years ago

what version is running in the box ?

thisisshanky commented on Volume adjustment of MOH on CME in IP Telephony 5 years ago

i m glad that worked for you!!

thisisshanky commented on CUE Module with zero Disk Space in IP Telephony 5 years ago

is the CUE data already backed up?  Have you tried taking CUE offline, restore the module to...

thisisshanky commented on IP PHone 7965 Auxiliary Port in IP Telephony 5 years ago

doenst the side units have an additional aux port ? not sure if this helps..with the switchook...

thisisshanky commented on Automatically download Exported user data to re-import to AD in IP Telephony 5 years ago

James,What are you trying to do here...if you do AD integration the data is pulled one way from AD...

thisisshanky commented on Call manager 4 administrator password recevory in IP Telephony 5 years ago

on an alternate note you may want to migrate the CUCM to 8.x as you are past support date from...

thisisshanky commented on Number Translation in IP Telephony 5 years ago

@javalenc - the way he has set it up, he will still need to replicate all these 500 translation...

thisisshanky commented on video over IP in Video Over IP 5 years ago

you can use a DMP / DMM solution. Is the video live or have it formatted and available as a file.

thisisshanky commented on video calls in Video Over IP 5 years ago

what are endpoints are you using for video ?

thisisshanky commented on MeetingPlace 8.0 on VMware ESXi in Video Over IP 5 years ago

like suggested by William, the nic for MPlace should be attached to the vmswitch which connects to...

thisisshanky commented on CUCM 7.1 sip to Tandberg MXP 3000 in Video Over IP 5 years ago

Check the Tandberg MXP3000 admin guide..http://www.tandberg.com/support/video-conferencing-...

thisisshanky commented on Asterisk to CME Calling Issue in IP Telephony 5 years ago

can you try enabling vad and see if that makes a difference ? and changing it to g729 ..etc.....

Bio

I have worked in the networking industry for over 11 yrs with Cisco UC product portfolio.

The Netpro team has made a tremendous effort to appreciate members with their rating system. My message to Netpro users "Please show appreciation to forum members, who solve your problems".
---------------------------------------------------------------------------------------------------------------
Certifications that I hold:
CCIE Voice #42EF (Guess what this number is in hex)
CCNA, CCDA, CCNP, CCVP*
CIPT:SS, CIPT:DS, CIPT:OS CIPT:ES (Support, Design, Operations, Express)
CWLAN:FE, CWLAN:SE, CWLAN:SS, (WLAN Field, System and Sales engineer)
---------------------------------------------------------------------------------------------------------------











thisisshanky's Stats

Points7463
Discussion started 212
Answers marked as Correct 487
Endorsed 0
Content Rated 188
Website: