ThomasPemberton

Member Since: Sep 01, 2011

English
ThomasPemberton commented on Cisco Mobile 8.0 vs Cisco Jabber (iOS) in Jabber Clients 4 years ago

I am not a phone guy, but what it came down to is that our Phone Admin had to download a new "...

ThomasPemberton commented on NCS - Reducing usage on /dev/mapper/smosvg-optvol in Network Management 4 years ago

I opened a TAC case and talked to Cisco.  They basically said it is a new alert that was added in...

ThomasPemberton commented on Access Point(s) "Frozen" in Other Wireless - Mobility Subjects 4 years ago

Any update on this?  My controller is on 7.2.103.0 and we have seen a couple "AP Crashed Due To...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 4 years ago

No I never got the TV working.  I did find for the similar Wii problem we were having, that you...

ThomasPemberton commented on WLC containing one of its own AP's as a rogue? in Other Wireless - Mobility Subjects 4 years ago

I am seeing this on our campus as well.  It is not realistic (with the volume of devices we have)...

ThomasPemberton commented on Updating IOS version on Lightweight Access point in Other Wireless - Mobility Subjects 4 years ago

Thanks everyone. I had not ran into this since I started this job but understand now. Thanks for...

ThomasPemberton commented on Updating IOS version on Lightweight Access point in Other Wireless - Mobility Subjects 4 years ago

Ok, is there a documented process for updating this on the controllers then?  I see for example...

ThomasPemberton commented on Cisco Jabber / Mobile for iPhone call disconnect in Jabber Clients 4 years ago

The phone guy did some digging on our campus...looks like you have to be on call manager 7.1.5 and...

ThomasPemberton commented on Cisco Jabber / Mobile for iPhone call disconnect in Jabber Clients 4 years ago

I've had a similar problem but not over VPN connection, just from on campus sitting at my desk. ...

ThomasPemberton commented on WCS/WLC and Wii in Security and Network Management 4 years ago

Thanks I will check this out. ~Tom

ThomasPemberton commented on WCS/WLC and Wii in Security and Network Management 4 years ago

After a little more testing it looks like setting 1Mbps and 2Mbps to "supported" will not work, but...

ThomasPemberton commented on WCS/WLC and Wii in Security and Network Management 4 years ago

I will check those.  I had heard this suggestion before and made the changes - didn't seem to help...

ThomasPemberton commented on WCS/WLC and Wii in Security and Network Management 4 years ago

Any other solutions for this?  Our campus is having the same problem.  We have 3x5508s and NCS -...

ThomasPemberton commented on NCS Block/Limit Alarms? in Other Wireless - Mobility Subjects 4 years ago

I see two place to configure alarmsMonitor-->AlarmsCan Aknowledge, Assign, etc.  Can enable or...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 4 years ago

Well after some more digging it looks like we have about 20-30 clients displaying this behavior......

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

After talking to another networking guy here earlier today, he said he could not find any record of...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

This is actually on  a college campus, so there are a variety of devices in rooms.  The area that...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

attached is a wireless cap i did with my laptop...just from a quick look and didn't see much...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

No luck on disabling Aironet IE or data ratesclient detail...(Cisco Controller) >show client...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

Aironet IE is enabled on this WLAN.  Will probably still try the rate change...contacted user and...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

+ TV Make/Model: Vizio E3D320VX + Firmware Version: 1.22.8.0874 (Latest version from Vizio )

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

User is gone today, but Tuesday I am going to stop by again, Will give that a shot.  I attached to...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

probably a dumb question, but where would i check that?

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

debugging a client that works, it seems to break at the very last step of the PEM, sending an XID...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

Once the MAC is registered on our system, we have no encryption, webauth, etc on our wireless. ...

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

Client band select is not enabled on this WLAN

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

No firewall, it is a Vizio brand TV with wireless (for netflix, hulu, etc)

ThomasPemberton commented on Client Stuck in DHCP_REQD state in Getting Started with Wireless 5 years ago

I unplugged the TV for a few minutes and started it back up when I was testing, no luck... I'm new...

Bio












ThomasPemberton's Stats

Points0
Discussion started 6
Answers marked as Correct 0
Endorsed 0
Content Rated 1