tkavithas87

Member Since: May 21, 2012

English
tkavithas87 commented on UCCX CAD in Unified Communications Applications 2 years ago

thanks chris

tkavithas87 commented on UCCX CAD in Unified Communications Applications 2 years ago

thanks Chris for the response.I couldnt find an option in CAD workflow from CAD administrator.could...

tkavithas87 commented on CUCM7.1 called Party transformation in IP Telephony 3 years ago

thanks    aokanlawon.you are correct

tkavithas87 commented on CUCM with phone registration in IP Telephony 3 years ago

Thanks aokanlawon.It worked

tkavithas87 commented on UCCX IP phone agent in Unified Communications Applications 3 years ago

I restarted the ip phone agent service.now its working

tkavithas87 commented on UCCX IP phone agent in Unified Communications Applications 3 years ago

hi anchoudh,Now its showing another error."selected ip phone agent is not active.select another ip...

tkavithas87 commented on UCCX IP phone agent in Unified Communications Applications 3 years ago

Now its working.It was not working because threre were multiple lines assigned to the agent phone.

tkavithas87 commented on Trancoding on ISR2921 in IP Telephony 3 years ago

yeah the PVDM is not slotted correctly.I have slotted correctly .its working now.thank you guys.

tkavithas87 commented on Trancoding on ISR2921 in IP Telephony 3 years ago

2921#show inventoryNAME: "CISCO2921/K9", DESCR: "CISCO2921/K9 chassis, Hw Serial#: FGL1636147P, Hw...

tkavithas87 commented on UCCX agent login service in Unified Communications Applications 3 years ago

Hi Anand,1.This is not UCCX HA setup.IPPA service pointing  to the UCCX server which is the only...

tkavithas87 commented on UCCX agent login service in Unified Communications Applications 3 years ago

I created the service in call manager and subscribed that to the phone.I did restarted the  "Cisco...

tkavithas87 commented on UCCX agent login service in Unified Communications Applications 3 years ago

I have attached the snapshot which is the URl used for this service.Is there any thing wrong with...

tkavithas87 commented on UCCX 8.01 in Unified Communications Applications 3 years ago

this is for a lab.I installed UCCX premium license.Now ports wre registered and The RMCM is...

tkavithas87 commented on UCCX 8.01 in Unified Communications Applications 3 years ago

yeah you ar correct  i have used the IVR license.there are 3 licenses for uccx1.Advanced2.standand3...

tkavithas87 commented on UCCX 8.01 in Unified Communications Applications 3 years ago

Managed to uplad the image.there are 2 field AXL service provider,unified CM telephony subsystem....

tkavithas87 commented on UCCX 8.01 in Unified Communications Applications 3 years ago

I couldnt upload the snapshot.What i meant was there is no option for RMCM subsystem.I didnt mean...

tkavithas87 commented on unity connection in Unified Communications Applications 3 years ago

Call routing rule is set.here it is set send call to opening greeting.so its directing to opening...

tkavithas87 commented on FXO port Issue in IP Telephony 3 years ago

I used the command "suppervisory disconnect anytone" under the fxo voice-port.its working now.

tkavithas87 commented on phone 7975 with call manager in IP Telephony 3 years ago

Thanks Anas.Let me try.

tkavithas87 commented on 2921 router with license in Unified Communications Applications 3 years ago

I need to know one more thing,The method of  upgrading IOS is only be done byDeteleing the older...

tkavithas87 commented on UC560 unity express in Voice over IP 3 years ago

Thanks karthik

tkavithas87 commented on unity express in Voice Systems 3 years ago

thanks

tkavithas87 commented on cucm 7.1.3 in IP Telephony 3 years ago

I am using internet explorer.but used on another computer with internet explorer.its working.Look...

tkavithas87 commented on Integation of Unity Express with CME in Unified Communications Applications 3 years ago

The following bind command was missing and as clilekis mentioned  the codec should be g711ulaw for...

tkavithas87 commented on 8900 series phones in IP Telephony 3 years ago

Thanks Harmit.

tkavithas87 commented on Integation of Unity Express with CME in Unified Communications Applications 3 years ago

Following are the commands I used on CME for the integrationinterface Integrated-Service-Engine0/0...

tkavithas87 commented on 8900 series phones in IP Telephony 3 years ago

Thanks Harmit,Wish you the same.Following is the show version output2921#show versionCisco IOS...

tkavithas87 commented on 8900 series phones in IP Telephony 3 years ago

I found the supported phone models using the following link http://www.cisco.com/en/US/docs/...

tkavithas87 commented on 8900 series phones in IP Telephony 3 years ago

WE have the CME version 8.6.but It doesnt support.

tkavithas87 commented on ISdn Issue in IP Telephony 3 years ago

The problem was the isdn cable was disconnected.thanks

tkavithas87 commented on CUE on Cisco 2921 ISR in Unified Communications Applications 3 years ago

I have configured following on the router to enable this service engineinterface Loopback1 ip...

tkavithas87 commented on CUCM Admin in IP Telephony 3 years ago

I tried both  https://x.x.x.x/ccmadmin ,just plain ip address It was not working.but I was able to...

tkavithas87 commented on SRST on call manager 7.1 in Voice over IP 3 years ago

Thanks Terry .I have checked the SRST reference many times.no use.anyway  I will try to find a...

tkavithas87 commented on CUCM on Vmware in IP Telephony 3 years ago

There is a cucm running already on the vmware.For that i set the vmware setting(vmware network...

tkavithas87 commented on Call Manager 7.1 in IP Telephony 3 years ago

Could any one help me with this.thanks

tkavithas87 commented on CUCM on Vmware in IP Telephony 3 years ago

The VM is located on the pc itself.

tkavithas87 commented on CUCM on Vmware in IP Telephony 3 years ago

HI I am using VMware workstation

tkavithas87 commented on cucm with sip trunk in IP Telephony 3 years ago

hi aokanlawon,I couldnt find the button to mark a question as answered.thanks

tkavithas87 commented on ISDN PRI Gateway Configuration in IP Telephony 3 years ago

Hey I couldnt find the button to mark this as answered.I am new to this forum aswell

tkavithas87 commented on cucm with sip trunk in IP Telephony 3 years ago

I am sorry aokanlawon.as you mentioned I am new to this from.anyway I will follow your instruction....

tkavithas87 commented on cucm with sip trunk in IP Telephony 3 years ago

10.1.3.100 is the CUCM ip address. 1.I am wondering how this sip call works without the command "...

tkavithas87 commented on CUCM on Vmware in IP Telephony 3 years ago

Could some one help me with thisthanks

tkavithas87 commented on SRST on call manager 7.1 in Voice over IP 3 years ago

1.This 7003 no was configure to this phone previously with a UC560.but That UC560 is no longer with...

tkavithas87 commented on ISDN PRI Gateway Configuration in IP Telephony 3 years ago

I used the commandsnetwork-clock-par wic xnetwork-clock-select 1 e1 xnow it ok.can able to...

tkavithas87 commented on SRST on call manager 7.1 in Voice over IP 3 years ago

I tried both way.No use.still it is  registering with number 7003.

tkavithas87 commented on Codec Used By IP Phone in CUCM in IP Telephony 3 years ago

Thanks All for helpful guides

tkavithas87 commented on anyconnect vpn uc560 in Voice Systems 3 years ago

Thanks Bradon.Let me try with the 15.1(4)M5 versionkavi

tkavithas87 commented on SRST on call manager 7.1 in Voice over IP 3 years ago

CME#show run | s tel|ephonetelephony-service srst mode auto-provision all srst ephone template 5...

tkavithas87 commented on Call Manager 7.1 in IP Telephony 3 years ago

hi,There are two  7975 phone connected to the network.on one of the phone it saying that updating...

Bio












tkavithas87's Stats

Points0
Discussion started 73
Answers marked as Correct 0
Endorsed 0
Content Rated 62