Tomonori Taniguchi

Member Since: Nov 14, 2010

English
Tomonori Taniguchi commented on Issues with VCS Traversal zone - SIP in TelePresence 1 year ago

Correct, H.323 traversal link the credential information crypt by using time information, but not...

Tomonori Taniguchi commented on Replacing Source Alias on VCS in TelePresence 2 years ago

Assume [email protected] and [email protected] on same VCS (or authentication policy...

Tomonori Taniguchi commented on DNS SRV for TelePresence Video Communication Server.pdf in TelePresence 2 years ago

If H.323 Endpoint support SRV dialing without register VCS, then Endpoint will send SRV query like...

Tomonori Taniguchi commented on VCS-E in VMware in TelePresence 2 years ago

The demo license key is available from X8.1 (released on December 2013).There will be several rules...

Tomonori Taniguchi commented on C-series endpoints and SRV registration in TelePresence 2 years ago

MCU doesn’t support H.323RS SRV for gatekeeper registration process.If you must to have redundancy...

Tomonori Taniguchi commented on VCS Cluster and Tandberg Gatekeeper Neighboring in TelePresence 2 years ago

1) When we create a zone at the Tandberg GK do we need to specify every peer of the VCS cluster?...

Tomonori Taniguchi commented on Cisco VCS and Lync2013 integration in TelePresence 2 years ago

Correct, it is same PID (Option key index is 116341C00) and will display as “Microsoft...

Tomonori Taniguchi commented on Cisco TelePresence Video Communication Server X8.1 released in TelePresence 2 years ago

Please note X8.1 is not for CUCM integration, it is major release version for VCS series including...

Tomonori Taniguchi commented on Cisco TelePresence Video Communication Server X8.1 released in TelePresence 2 years ago

WebEx enable TelePresence support with X8.1 on VCS series deployment but not Expressway series...

Tomonori Taniguchi commented on C20 how to upgrade software ?? in TelePresence 2 years ago

If you are upgrading C20, software is either s52000tc6_3_0.pkg or s52001tc6_3_0.pkg depend on ASE...

Tomonori Taniguchi commented on VCS-E in VMware in TelePresence 3 years ago

Time-limited (trial) option key will support from X8.0 release.

Tomonori Taniguchi commented on Movi registration fails VCS Starter Pack in TelePresence 3 years ago

If your SIP domain for this VCS Starter Pack Expressway is jabber1.gkuc, then yes, URL should be...

Tomonori Taniguchi commented on Movi registration fails VCS Starter Pack in TelePresence 3 years ago

> _sips._tcp.jabber1.XXXX 5060 mapped to vcs.jabber1.XXXXPort for _sips should be “5061”._sips....

Tomonori Taniguchi commented on Scheduling Support in Telepresence Conductor with TMS in TelePresence 3 years ago

Schedule conference call with TelePresence Conductor officially support with TelePresence Conductor...

Tomonori Taniguchi commented on CTS 1300 how to register to VCS in TelePresence 3 years ago

You should use CUCM8.6.2 (and VCS X7) by minimum for SIP trunk between VCS, but prefer CUCM9.x as...

Tomonori Taniguchi commented on CTS 1300 how to register to VCS in TelePresence 3 years ago

BTW, if you are looking for CTS to register VCS for firewall traversal (i.e CTS behind firewall and...

Tomonori Taniguchi commented on CTS 1300 how to register to VCS in TelePresence 3 years ago

Current specification, CTS1300 receive provisioning configuration from CUCM.Therefore it only...

Tomonori Taniguchi commented on 1700 TANDBERG - system appears to be cycling through a reboot and will not start. in TelePresence 3 years ago

Shouldn’t take much time to complete factory reset by executing eee command.

Tomonori Taniguchi commented on Cisco Jabber Video Telepresence Integration in TelePresence 3 years ago

No, for VCS Expressway you will need TMS to provisioning user account and client configuration (...

Tomonori Taniguchi commented on [Question] is it possbile to use MCU 4501 on 1:1 NAT network? in TelePresence 3 years ago

For H.323, media port IP address negotiate during the call setup not using IP header address.If...

Tomonori Taniguchi commented on Cisco Jabber video Media through VCS? in TelePresence 3 years ago

As Guy advise above, make sure you select “Best effort” for SIP media encryption policy, otherwise...

Tomonori Taniguchi commented on How to make or shown VCS Expressway TURN works? in TelePresence 3 years ago

Authentication realm could be any parameter as long as it same as what you configure on your TURN...

Tomonori Taniguchi commented on Conductor Error in TelePresence 3 years ago

No, fix didn’t make into neither of XC2.0.1 nor XC2.0.2 (which just released from CCO early this...

Tomonori Taniguchi commented on Conductor Error in TelePresence 3 years ago

This should be “warning” not “error” and current implementation may be misleading…This message...

Tomonori Taniguchi commented on Firewall Port Check Utility for VCSe in TelePresence 3 years ago

Due to other high priority implantation, very unfortunately port tester for VCS product yet made...

Tomonori Taniguchi commented on Please help me fix error with Tandberg MXP in TelePresence 3 years ago

Can you login MXP Endpoint by using either telnet or ssh and execute following commands (and post...

Tomonori Taniguchi commented on Traversal and non-traversal calls in TelePresence 3 years ago

One VCS Expressway, VCS will use traversal call license to handle non-traversal call, if required....

Tomonori Taniguchi commented on VCS X7.1 Licensing Question (Master and Non-Master Peers) in TelePresence 3 years ago

From X7.0 release, call licenses are shared across the entire VCS cluster and this automatically...

Tomonori Taniguchi commented on VCS X7.1 Licensing Question (Master and Non-Master Peers) in TelePresence 3 years ago

Martin already explain well on this.To be clear, you may cluster VCSs even some of VCS(s) has...

Tomonori Taniguchi commented on Convert a VCSC to VCSE in TelePresence 3 years ago

Have you processed re-hosting the license from Cisco site?A part of it (for RMA), you should...

Tomonori Taniguchi commented on [Question] How to lock the setting menu with password on SX20 touch pad? in TelePresence 3 years ago

That configuration is for only protect administrator settings menu but not restart option which is...

Tomonori Taniguchi commented on Problems setup SIP trunk between CUCM 9.0.1 and VCS-C X7.2 in TelePresence 3 years ago

Are you making a call from SIP UA that registered on VCS?If so, SIP UA will initiate with local SIP...

Tomonori Taniguchi commented on How to display 2 bytes "DisplayNameOverrideValue" via API in TelePresence 3 years ago

I ran script test by using Python while ago and configure 2-bytes site name which was working fine...

Tomonori Taniguchi commented on C60 self view PIP defaulting in TelePresence 3 years ago

Humm, intersting as I tested with TC5.1.4 and works fine with me.> the issue remains the same....

Tomonori Taniguchi commented on Layout question Cisco C40 in TelePresence 3 years ago

Does both C40 run with same software version?I believe there was default (standard) layout update...

Tomonori Taniguchi commented on Which ports should be used between SX20 and Intouch? in TelePresence 3 years ago

1. should these have to have same subnet mask and same G/W? if then, why?No, inTouch able to peer...

Tomonori Taniguchi commented on bandwidth keys for Tandberg Edge 95 in TelePresence 3 years ago

BTW, PID for Edge MXP bandwidth upgrade from IP only to 512kbps ISDN/2Mbps IP is “LIC-EDG95-BW1”

Tomonori Taniguchi commented on bandwidth keys for Tandberg Edge 95 in TelePresence 3 years ago

In order to use your Edge 95 over ISDN connection, you must purchase bandwidth option key that...

Tomonori Taniguchi commented on bandwidth keys for Tandberg Edge 95 in TelePresence 3 years ago

You can run “xsta system” command on codec either via serial console port or telnet on it.If WebGUI...

Tomonori Taniguchi commented on bandwidth keys for Tandberg Edge 95 in TelePresence 3 years ago

You can check IP and ISDN bandwidth configuration by executing “xsta system” on your Edge MXP codec...

Tomonori Taniguchi commented on Multipoint calls in Cisco C40 connecting as audio only in TelePresence 3 years ago

From what I see above, your C40 doesn’t have multisite option therefore only support 1 video and 1...

Tomonori Taniguchi commented on C60 self view PIP defaulting in TelePresence 3 years ago

If you are looking for selfview on top/left, try configure your C60 with following two commands....

Tomonori Taniguchi commented on Multipoint calls in Cisco C40 connecting as audio only in TelePresence 3 years ago

What is outcome of “xsta system” command on your C40 codec?Do you see “true” for Optionkeys...

Tomonori Taniguchi commented on Endpoint got "stuck" in conference. in TelePresence 3 years ago

What is model of MCU and software version run on it?

Tomonori Taniguchi commented on Firewall Port Check Utility for VCSe in TelePresence 3 years ago

Yes, that is expected result as original IPT program point to test BC server hosted by TANDBERG...

Tomonori Taniguchi commented on Need to create Search rules based on Source Endpoints/subzone - VCS in TelePresence 3 years ago

Great to hear new search rule configuration works for you and thanks for sharing your result which...

Tomonori Taniguchi commented on can`t register h323 device on vcs-c in TelePresence 3 years ago

Martine, yes correct, most of case SIP UA won’t able to register both VCS and UCM due to different...

Tomonori Taniguchi commented on Need to create Search rules based on Source Endpoints/subzone - VCS in TelePresence 3 years ago

I assume your VCS is running with software X7.1 or prior version.VCS support search rule with...

Tomonori Taniguchi commented on can`t register h323 device on vcs-c in TelePresence 3 years ago

You should not configure MX300/EX90 to register on both UCM and VCS as SIP UA as these SIP UA only...

Tomonori Taniguchi commented on 880 MXP dial out multisite issue in TelePresence 3 years ago

Humm, I re-tested with same software version and configuration as you posted but I can receive 2nd...

Bio












Tomonori Taniguchi's Stats

Points1103
Discussion started 7
Answers marked as Correct 123
Endorsed 2
Content Rated 9