Jens Didriksen

This user profile is private

This user will need to follow you before you can view personal information about the user
English
Jens Didriksen's Activity on Cisco Support Community
Currently displaying 50 results

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

4 days 13 hours ago
Just confirm it happens with both H.323 and SIP calls from external sites? Did...

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

5 days 16 hours ago
I assume then that you are seeing this error on the VCS-E? Also, does this...

Jens Didriksen has commented on Tandberg C40 Codec went to Maintenance Mode during boot up.

6 days 11 hours ago
Yes, that'll work. If you had TC7.3.3 already installed prior to upgrading to...

Jens Didriksen has commented on Tandberg C40 Codec went to Maintenance Mode during boot up.

6 days 15 hours ago
I had the same thing happening with a C40 yesterday; upgraded system, rebooted...

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

6 days 17 hours ago
You need to provide more information regarding the deployment, are you using...

Jens Didriksen has commented on TMS 15.1 does not respect Preferred Protocol in Routing

1 week 1 day ago
It's not a browser issue - which it, in hindsight, could not have been since...

Jens Didriksen has commented on TMS 15.1 does not respect Preferred Protocol in Routing

1 week 2 days ago
Thanks Wayne, very much appreciated. :) Too make this even stranger; it...

Jens Didriksen has created TMS 15.1 does not respect Preferred Protocol in Routing

1 week 2 days ago
TMS 15.1 C-series: TC7.2.1, TC7.3.4 SX20 and 80: TC7.3.4 and EC8.01 All end-...

Jens Didriksen has commented on SX80 without Touch 10

1 week 2 days ago
Yes, just use the API relevant to the software version your system is running;...

Jens Didriksen has commented on is it possible, Video endpoint registered in CUCM call standalon SX10 via SIP Trunk ?

1 week 5 days ago
1. Yes, but it's not that simple and straight forward as the SX10 can only be...

Jens Didriksen has commented on I can´t logging with jabber for telepresence

1 week 5 days ago
Yes, you can use JabberVideo for Telepresence with your version of TMS, however...

Jens Didriksen has commented on Replacing a C40 with a SX80 on TMS

1 week 5 days ago
Don't forget TMS needs to be 15.x if the SX80 runs CE8.x /jens Please rate...

Jens Didriksen has commented on C40 Codec - Default Username and Password for web access

2 weeks 10 hours ago
We had a few C-series arrive with Cisco1234 as the admin password. /jens...

Jens Didriksen has commented on TC7.3.4 is released

2 weeks 16 hours ago
The current target is set to TC7.3.5 preliminary ETA february 2016 (This may...

Jens Didriksen has commented on Any way to get rid of the "Call not encrypted" message on SX10?

2 weeks 16 hours ago
Wouldn't hold my breath waiting for that one since TC software is in...

Jens Didriksen has commented on Any way to get rid of the "Call not encrypted" message on SX10?

2 weeks 6 days ago
Still listed as  "open" with versions affected being TC7.2 and TC7.3,...

Jens Didriksen has commented on SX10 Encrypted cannot connect to other SX10 encrypted internall

3 weeks 5 days ago
Would also be good if you could include the software versions of the SX10 and...

Jens Didriksen has commented on TMS update check does not occur automatically

4 weeks 13 hours ago
Can't see this listed as a known bug on Cisco Bug Search site. I bypassed 15....

Jens Didriksen has commented on SX10 without Proxy server

1 month 4 days ago
No, this has got nothing to do with having, or not having, a proxy server. As...

Jens Didriksen has commented on Cisco CE8.0 and TMS 14.x

1 month 5 days ago
I tried it with 14.4.x just because :) -  and it did not work at all, had...

Jens Didriksen has commented on sx 80 codec dialing issue.

1 month 1 week ago
Heh - that document shows, IMO, a disconnect between the CUCM development team...

Jens Didriksen has commented on sx 80 codec dialing issue.

1 month 1 week ago
172.16.50.40 is the correct format when dialling IP addresses so when it...

Jens Didriksen has commented on CE8.0.0 - Collaboration Endpoint Software 8.0.0 is released

1 month 3 weeks ago
You need to expand "Latest" - see attached screenshot. /jens Please rate...

Jens Didriksen has commented on Can I use remote control of SX20 with Codec C20.

1 month 3 weeks ago
Yes, TRC6 only works with SX10 (all software releases) and SX20 running CE8.x...

Jens Didriksen has commented on Can I use remote control of SX20 with Codec C20.

1 month 3 weeks ago
Yes, they both use TRC5 for the TC software versions, the new CE8 software for...

Jens Didriksen has commented on C-40 URI dialing using IP address as the suffix not woking

2 months 2 days ago
In that case you need to add ExpresswayC and E to the mix as you otherwise won'...

Jens Didriksen has commented on CE8.0.0 - Collaboration Endpoint Software 8.0.0 is released

2 months 1 week ago
Wow, they weren't joking when they said the API had changed - here's the impact...

Jens Didriksen has commented on VCS "Hop Count Exceeded"

2 months 2 weeks ago
Type: Email This, as was pointed out by both Patric and myself earlier,...

Jens Didriksen has commented on VCS neighbour with Cisco IOS gatekeeper issue

2 months 2 weeks ago
It will not find 412345 when the end-point is registered as 12345 without...

Jens Didriksen has commented on VCS neighbour with Cisco IOS gatekeeper issue

2 months 2 weeks ago
The first with "undefined reason" is understadable as it's registered as 12345...

Jens Didriksen has commented on VCS neighbour with Cisco IOS gatekeeper issue

2 months 2 weeks ago
Yes, but then you need to change "Pattern behavior" to "Leave" /jens Please...

Jens Didriksen has commented on CE8.0.0 - Collaboration Endpoint Software 8.0.0 is released

2 months 2 weeks ago
"...there are some big nasties in there (ie, no Touch 8 support, no TRC5 Remote...

Jens Didriksen has commented on VCS neighbour with Cisco IOS gatekeeper issue

2 months 2 weeks ago
The type of zone you create on the VCS should be a "Neighbor Zone", and I take...

Jens Didriksen has commented on TC C60 Codec logs - which log file shows Settings changes?

2 months 2 weeks ago
Yes, Patrick is correct, just tested with a C40, and this is what is looks like...

Jens Didriksen has commented on TC C60 Codec logs - which log file shows Settings changes?

2 months 2 weeks ago
eventlog/all.log will show you who made config changes, it will look something...

Jens Didriksen has commented on Cisco Announces Intent to Acquire Acano

2 months 2 weeks ago
"Cisco Systems Inc. said Friday it agreed to buy privately held conferencing...

Jens Didriksen has commented on TMS UPGRADE

2 months 2 weeks ago
See this thread: https://supportforums.cisco.com/discussion/12508886/tms-...

Jens Didriksen has commented on Jabber windows client

2 months 3 weeks ago
You've posted in the wrong forum, this forum was for the "free" JabberVideo...

Jens Didriksen has commented on Cisco Announces Intent to Acquire Acano

2 months 3 weeks ago
Wow - so it's back to the future for all the former TANDBERG/Cisco telepresence...

Jens Didriksen has commented on VCS "Hop Count Exceeded"

2 months 3 weeks ago
"Something that is strange is in the search history where the call fails, it's...

Jens Didriksen has commented on VCS Control NON-Traversal License

2 months 3 weeks ago
1,2, 3,4, 5 and 6; Non-traversal license on each VCS-C if protocols is not...

Jens Didriksen has commented on VCS "Hop Count Exceeded"

2 months 3 weeks ago
You cannot dial IP##Alias from a Cisco/TANDBERG end-point as this is Polycom...

Jens Didriksen has commented on VCS Control NON-Traversal License

2 months 3 weeks ago
In addition to Patricks suggestion, here's a couple of other resources which...

Jens Didriksen has commented on use of ProductID (1Pxxx-x-xxxxxxxx) in Codec SX20

2 months 3 weeks ago
You shouldn't need to do anything with the ProductID key since the unit is...

Jens Didriksen has commented on Will VCS v8.6.1 work with TMS v13.2.2?

2 months 3 weeks ago
You don't say from which version you are ugrading the VCS from, but just to be...

Jens Didriksen has commented on Edge 75 MXP Software upgrade

2 months 3 weeks ago
Contact TAC and ask for the relevant release key(s) to be generated and...

Jens Didriksen has commented on What do I need to set up SIP VC calls from the Internet

2 months 4 weeks ago
Yes, you do need SRV records in place, you should really have SRV records for...

Jens Didriksen has commented on Where did TMS put my back up?

3 months 16 hours ago
This has been asked before :) - see https://supportforums.cisco.com/discussion/...

Jens Didriksen has commented on SX10 Mic Volumes and Echo Cancellation settings

3 months 1 week ago
Have you tried using it with only the intergrated microphone instead of a...

Jens Didriksen has commented on MX800 registered to TPaaS receiving calls from 100@ numbers

3 months 1 week ago
"There are some form of these calls that will show up as coming from "cisco"...

Jens Didriksen's Stats

Points1853
Discussion started 21
Answers marked as Correct 170
Endorsed 15
Content Rated 169