Jens Didriksen

This user profile is private

This user will need to follow you before you can view personal information about the user
English
Jens Didriksen's Activity on Cisco Support Community
Currently displaying 50 results

Jens Didriksen has commented on VC IP Address for testing

3 days 4 hours ago
https://supportforums.cisco.com/discussion/12441541/videoconferencing-test-...

Jens Didriksen has commented on Packet Loss Resilience

1 week 1 day ago
Don't know how Cisco does this, but I assume it will be similar, or at least...

Jens Didriksen has commented on SX20 standalone and SX20 register over TMS

1 week 3 days ago
Again, TMS does not come into this, as I said before, TMS is a management and...

Jens Didriksen has commented on Packet Loss Resilience

1 week 3 days ago
They are types of technologies used; XOR is an "exclusive OR" logic gate, where...

Jens Didriksen has commented on Packet Loss Resilience

1 week 4 days ago
Following from an old admin guide: quoteNOTE: This Experimental command can be...

Jens Didriksen has commented on PASSWORD STRUCTURE ON MXP SERIES CODECS

1 week 4 days ago
In the MXPs you have ippassword which is the same as the SystemUnitPassword,...

Jens Didriksen has commented on About Cisco telepresence SX20

1 week 5 days ago
As I pointed out in my previous reply, the Remote Monitoring Key is no longer...

Jens Didriksen has commented on About Cisco telepresence SX20

2 weeks 10 hours ago
The Remote Monitoring Option Key is no longer free, so you need to contact your...

Jens Didriksen has commented on About Cisco telepresence SX20

2 weeks 19 hours ago
Suggest you take a look at the admin guide - page 10 onwards tells you all...

Jens Didriksen has commented on Tandberg 880 MXP firmware versions and differences

3 weeks 7 hours ago
The fact that it was shipped with B4.x confirms it is a "classic" TANDBERG 880...

Jens Didriksen has commented on H323 calls issue dialing via IP or IP##Extension

3 weeks 2 days ago
All depends on whether or not the external site has deployed the relevant SRV...

Jens Didriksen has commented on H323 calls issue dialing via IP or IP##Extension

3 weeks 2 days ago
As Patrick said; address##alias is a Polycom proprietary format, however, if...

Jens Didriksen has commented on UPGRADE MXP1700 FROM L5.1.1 TO F9.3.4

3 weeks 3 days ago
In which case the last ever software version released for this platform was, as...

Jens Didriksen has commented on UPGRADE MXP1700 FROM L5.1.1 TO F9.3.4

3 weeks 6 days ago
Huh? Are you sure it's an 1700MXP? The only systems I know about running L type...

Jens Didriksen has commented on SX20 standalone and SX20 register over TMS

4 weeks 7 hours ago
TMS is just a management/scheduling application, not a CAC (Call Admission...

Jens Didriksen has commented on SIp URI Question

1 month 22 hours ago
Your systems can dial out using URI dialling without being registered to a SIP...

Jens Didriksen has commented on Caan you explain AD-Hoc and Randezvous conference

1 month 1 week ago
See this link: Conferencing types /jens Please rate replies and mark...

Jens Didriksen has commented on SX10 without be connected to a MCU

1 month 2 weeks ago
"If you do have a call control server like the ones mentions, depending on how...

Jens Didriksen has commented on SX10 without be connected to a MCU

1 month 2 weeks ago
Yes you can. I assume you mean this system is a "stand-alone", so it's not...

Jens Didriksen has commented on SX10 Version check / Sip & Provision errors

1 month 3 weeks ago
SX10 is only officially supported in TMS version 14.4 and later if/when using...

Jens Didriksen has commented on Unwanted Automatic Call hitting on my Expressway E

2 months 1 week ago
Turning off SIP udp will stop those particular calls, however, you won't be...

Jens Didriksen has commented on Unwanted Automatic Call hitting on my Expressway E

2 months 1 week ago
SIP UDP is disabled by default by Cisco, and should only be turned on if you...

Jens Didriksen has commented on Expressway E to MCU call

2 months 1 week ago
You can use the "fallback alias" for this, just enter the alias you want the...

Jens Didriksen has commented on Unwanted Automatic Call hitting on my Expressway E

2 months 1 week ago
This is a very well known issue which has been raised here on numerous...

Jens Didriksen has commented on VCS E Changing IP Address into URI

2 months 3 weeks ago
You first need to determine whether or not that end-point is actually reachable...

Jens Didriksen has commented on VCS E Changing IP Address into URI

2 months 3 weeks ago
An [email protected] address means the endpoint you are calling must be registered...

Jens Didriksen has commented on vcs-c and vcs-e pattern symbols explanation?

3 months 6 days ago
That is regex (regular expressions), take a look at the admin guide, pages 378...

Jens Didriksen has commented on sip spam call attack and MCU and vcs-e

3 months 1 week ago
Non-encrypted call signalling, SIP UDP is now turned off by default in the VCS-...

Jens Didriksen has commented on sip spam call attack and MCU and vcs-e

3 months 1 week ago
This is a well known issue, and it affects H.323 as well as SIP, take a look at...

Jens Didriksen has commented on video conference units keep getting unknown sip calls from its own public ip address

3 months 1 week ago
This is very well known issue, here's some more info covering this: https://...

Jens Didriksen has commented on Webex and Telepresence Content Server

3 months 1 week ago
Webex is a conferencing solution, see http://www.cisco.com/c/en/us/products/...

Jens Didriksen has commented on SX20 CONFERENCE FAILURE

3 months 1 week ago
You can't, not without having the MS license installed. The SX20 allows for...

Jens Didriksen has commented on Bandwidth Consumption SX20

3 months 1 week ago
Don't forget to include an additional 20% for overheads, so a point-point...

Jens Didriksen has commented on Video Conferencing using Jabber for Mac

3 months 1 week ago
Take a look at Ubiety, it's based on Acano, which means you'll be able to...

Jens Didriksen has commented on Telepresence SX10 Question

3 months 1 week ago
"Does SX10 version TC7.2.0 support black list for incoming call?" No, you...

Jens Didriksen has commented on SX20 CONFERENCE FAILURE

3 months 1 week ago
"I have SX20(without multisite license)" ...and there is your problem - you...

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

3 months 3 weeks ago
Just confirm it happens with both H.323 and SIP calls from external sites? Did...

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

3 months 3 weeks ago
I assume then that you are seeing this error on the VCS-E? Also, does this...

Jens Didriksen has commented on Tandberg C40 Codec went to Maintenance Mode during boot up.

3 months 3 weeks ago
Yes, that'll work. If you had TC7.3.3 already installed prior to upgrading to...

Jens Didriksen has commented on Tandberg C40 Codec went to Maintenance Mode during boot up.

3 months 3 weeks ago
I had the same thing happening with a C40 yesterday; upgraded system, rebooted...

Jens Didriksen has commented on Call rejected by Gatekeeper - far-end gatekeeper refused call

3 months 3 weeks ago
You need to provide more information regarding the deployment, are you using...

Jens Didriksen has commented on TMS 15.1 does not respect Preferred Protocol in Routing

3 months 3 weeks ago
I did submit a "possible bug" in 15.1 report to Cisco TAC a while back, however...

Jens Didriksen has commented on TMS 15.1 does not respect Preferred Protocol in Routing

3 months 3 weeks ago
Thanks Wayne, very much appreciated. :) Too make this even stranger; it...

Jens Didriksen has created TMS 15.1 does not respect Preferred Protocol in Routing

3 months 3 weeks ago
TMS 15.1 C-series: TC7.2.1, TC7.3.4 SX20 and 80: TC7.3.4 and EC8.01 All end-...

Jens Didriksen has commented on SX80 without Touch 10

3 months 3 weeks ago
Yes, just use the API relevant to the software version your system is running;...

Jens Didriksen has commented on is it possible, Video endpoint registered in CUCM call standalon SX10 via SIP Trunk ?

3 months 4 weeks ago
1. Yes, but it's not that simple and straight forward as the SX10 can only be...

Jens Didriksen has commented on I can´t logging with jabber for telepresence

3 months 4 weeks ago
Yes, you can use JabberVideo for Telepresence with your version of TMS, however...

Jens Didriksen has commented on Replacing a C40 with a SX80 on TMS

4 months 9 hours ago
Don't forget TMS needs to be 15.x if the SX80 runs CE8.x /jens Please rate...

Jens Didriksen has commented on C40 Codec - Default Username and Password for web access

4 months 2 days ago
We had a few C-series arrive with Cisco1234 as the admin password. /jens...

Jens Didriksen has commented on TC7.3.4 is released

4 months 2 days ago
The current target is set to TC7.3.5 preliminary ETA february 2016 (This may...

Jens Didriksen's Stats

Points1943
Discussion started 21
Answers marked as Correct 182
Endorsed 16
Content Rated 171