vikas kumar

Member Since: Jun 09, 2010

English
vikas kumar commented on CE stop communicating to PE After Link Changeover in WAN, Routing and Switching 2 years ago

Dear Milan,I have cheked MAC on PE and CE.Both sides MAC address is correct.Regards

vikas kumar commented on CE stop communicating to PE After Link Changeover in WAN, Routing and Switching 2 years ago

Dear Milan,this is Direct Connection But passing via Multiple switches And eBGP is running between...

vikas kumar commented on CE stop communicating to PE After Link Changeover in WAN, Routing and Switching 2 years ago

Dear Milan,Yes it is ARP Cache issue.When client Clear ARP cache on CE it start communicating with...

vikas kumar commented on BGP autofailover on two WAN Links in WAN, Routing and Switching 2 years ago

Dear MS,thanks for post,that post has multiple ISP BGP peering.we have only one ISP,  both links...

vikas kumar commented on Local Access router/switch if Radius Server Fails in AAA, Identity and NAC 3 years ago

hi Nenothanks so much fo cliearification now it is working regards

vikas kumar commented on Local Access router/switch if Radius Server Fails in AAA, Identity and NAC 3 years ago

HI Neno,thanks for reply.I tried command but  my AAA autentication is working fine.only local user...

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

hi Peterplease find outputResult of the command: "show run | in pool" ip local pool new-vpn-pool 2....

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Hi peter.I am getting /22 subnet on VPN client.regards

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Fabioi have sent Config on private message.thanks with regards vikas kumar

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Fabio,thanks for reply.Please find attached setup diagrame Top of this discusstion.I have...

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Andrew,i have sent you config.please me know any thing else.Regards vikas

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Anderw,i have checked, servers on two subnets can reach IP assigned to VPN client Machine....

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Anderw yes all servers on /22 subnet.If one subnet we can access other should be.regards vikas...

vikas kumar commented on Cant access other subnets using cisco VPN client in VPN 3 years ago

Dear Nitin,Thanks for mail.I have sent you config on pvt message.RegardsVikas

vikas kumar commented on LAN not able to access in asa site to site VPN. in VPN 3 years ago

Hi Portsthanks for mail please find output Site A-Sh routeroute outside 0.0.0.0 0.0.0.0 41.41.38....

vikas kumar commented on LAN not able to access in asa site to site VPN. in VPN 3 years ago

Hi portuthanks for reply.I did remove both sides, no route outside1 NOC_Servers 255.255.255.0 41.41...

vikas kumar commented on Spaning Tree Blocking VLAN in LAN, Switching and Routing 4 years ago

hi Tglenthanks for replyi need to add some more subinterface, but this problem i can do.i have...

vikas kumar commented on Spaning Tree Blocking VLAN in LAN, Switching and Routing 4 years ago

hi raza,sorry i did not put full sh run i have created VLANs on switch,switch#sh run00:20:50: %SYS-...

vikas kumar commented on Spaning Tree Blocking VLAN in LAN, Switching and Routing 4 years ago

hi Raza,thanks for reply.Please see Sh run of switch and router.interface FastEthernet1/0/1Des...

vikas kumar commented on How To make priority to Link in LAN, Switching and Routing 4 years ago

Dear DANthanks for reply,after changing cost toward to switch it is working fine.thanks so much for...

vikas kumar commented on How To make priority to Link in LAN, Switching and Routing 4 years ago

Dear Janno issue my friend, as i replied to dan switch2 toward switch 1  spanning-tree cost is...

vikas kumar commented on How To make priority to Link in LAN, Switching and Routing 4 years ago

Dear danthanks for replyi have tested both options but still traffic is going VIA radio link.even I...

vikas kumar commented on How To make priority to Link in LAN, Switching and Routing 4 years ago

Hi janthanks for reply, I have incresed priority 240 Switch 3 and 4 ports connected to switch1.but...

vikas kumar commented on MPLS Between Branches in MPLS 4 years ago

hi  shivlu, i need one favor. ...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Hi scott,i have configured AP 1142 and is working fine.thanks so much for support and help.i want...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Hi Scotti managed to get Gui of AP. configured AP from GUI.i am facing one problem when ...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Dear Scott,i have tried to do with TFTP. Start time Client Address File Mode Size Transferred...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Dear scott.thanks for support,i need one fevor, from where i can download c1142-k9w7-tar thanks...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Dear scottthanks so much.i managed to configure router AP and its working fine,now i need to...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Dear scottthanks for replyi will try this and let u know.is my config is ok.how can i come out from...

vikas kumar commented on Configure 892W router and AIR LAP 1142 AP in Getting Started with Wireless 4 years ago

Dear scottthanks for reply.i forgot to attach file. i am not able to configure 892W router AP.first...

vikas kumar commented on MPLS Between Branches in MPLS 4 years ago

Dear ShivluThanks for Reply I am looking help to configure MPLS between all L3 Switch,we will...

vikas kumar commented on Communication problem between Same Subnet in WAN, Routing and Switching 5 years ago

Dear GiorgosThanks for reply, all IP address's are provided by ISP and all are Static IP. this...

vikas kumar commented on Communication problem between Same Subnet in WAN, Routing and Switching 5 years ago

Dear GioagosThanks for reply, I know this is not right way to clear all time Arp table.before i do...

vikas kumar commented on Communication problem between Same Subnet in WAN, Routing and Switching 5 years ago

Dear andrew Thanks fro reply, we are clearing Arp table on Routers after that its start...

vikas kumar commented on Auto failover option in LAN, Switching and Routing 5 years ago

dear friend,thanks for replyplease find IP details and routing information, see attachment thanks...

vikas kumar commented on Broadband RAS over PPPoe in MPLS 6 years ago

Hi chetanthanks for your support and suggetions.i got image in disk2:  c7200p-ipbase-mz.122-33.SRD....

vikas kumar commented on Broadband RAS over PPPoe in MPLS 6 years ago

Dear Chetanthanks for your support and suggestionplease tell me what should i do change the IOS or...

vikas kumar commented on Broadband RAS over PPPoe in MPLS 6 years ago

HI GUISLARthanks for your support and suggestion ,i have to configure Cisco 7206 As BRAS for an ISP...

vikas kumar commented on Broadband RAS over PPPoe in MPLS 6 years ago

Hi Giuslarthanks so much for reply.i have enable AAA new model.i configured other aaa commandsBRAS#...

Bio












vikas kumar's Stats

Points0
Discussion started 24
Answers marked as Correct 0
Endorsed 0
Content Rated 4