William Bell

Member Since: Jul 25, 2007

English
William Bell's Activity on Cisco Support Community
Currently displaying 50 results

William Bell has commented on Jabber Certificate

2 months 4 weeks ago
Haitham,There are a couple of different design scenarios that may adjust the...

William Bell has commented on incoming called-number question

6 months 2 weeks ago
VoIP dial-peers shouldn't strip digits on pattern matches. POTS dial-peers...

William Bell has commented on Spontaeous New Calls When Call is Transferred

8 months 3 days ago
Aside from the statement that the original call is put on hold, the symptoms...

William Bell has commented on is there any way to disable gatekeeper registration requests

9 months 22 hours ago
I am not sure which device you are trying to configure but if you are talking...

William Bell has commented on DTMF Relay doesnt appear to work CME to CUE

9 months 5 days ago
First, I would check your CUE configuration to verify the DTMF method you have...

William Bell has commented on CALLS GOING STRAIGHT TO VOICEMAIL

9 months 6 days ago
First off, if you have a TAC case open and you are not receiving a response for...

William Bell has commented on CUCM permition to make call.

9 months 1 week ago
Java is correct (+5 J.), you can put an authorization code on route patterns (...

William Bell has commented on Is it possible to transfer an active call from a PLAR line to another extension? CUCM 9.1

9 months 1 week ago
I am going to assume that you provisioned PLAR by using a "null"...

William Bell has commented on Creating a succession of forwardings to external numbers

9 months 1 week ago
You can look at using remote destination/remote destination profiles, which is...

William Bell has commented on How can I pass a # sign to my MGCP FXO port?

9 months 1 week ago
There is a CM service parameter that controls whether CUCM will leave or strip...

William Bell has commented on Possible to disable intercom auto-answer on CUCM 10?

9 months 1 week ago
That may very well be the best approach. I think CUCM 7.x had the option to...

William Bell has commented on How to verify voice channels on voice gateway

9 months 2 weeks ago
Hello, To check clocking you can use the "show network-clock"...

William Bell has commented on Callmanager call blocking

9 months 3 weeks ago
Paul,As noted in my comment, calls traversing a SIP trunk into your...

William Bell has commented on Callmanager call blocking

9 months 4 weeks ago
Hey Paul, I replied to your comment on the NetCraftsmen site. When there...

William Bell has commented on CUCM 10 subs

10 months 3 weeks ago
I'd check the following: 1. NTP sync status on the pub node....

William Bell has created CUCM-VCS Integration VCS B2BUA Encryption Call Failures

11 months 1 week ago
All,I have the following scenario: CUCM 9.1.2SU1VCS X8.1.1MX300 endpoints...

William Bell has commented on CUCM compatibility with SRST

11 months 2 weeks ago
You can find the SRST compatibility guides here: http://www.cisco.com/c/en...

William Bell has commented on CUCM compatibility with SRST

11 months 2 weeks ago
You can find the SRST compatibility guides here: http://www.cisco.com/c/en...

William Bell has commented on CUCM compatibility with SRST

11 months 4 weeks ago
Rajeev,It is correct that there is no direct dependency between CUCM and SRST....

William Bell has commented on CUCM compatibility with SRST

11 months 4 weeks ago
Rajeev,It is correct that there is no direct dependency between CUCM and SRST....

William Bell has commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group

1 year 1 week ago
Danny, It isn't as absolute as that. These options are parameters on...

William Bell has commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group

1 year 1 week ago
Danny, It isn't as absolute as that. These options are parameters on...

William Bell has commented on How to change Administrator Username (OS/Diaster/CLI) in CUCM - 9.1.2

1 year 1 week ago
See the installation guide. Table 2 under the "Server Installation...

William Bell has commented on How to change Administrator Username (OS/Diaster/CLI) in CUCM - 9.1.2

1 year 1 week ago
See the installation guide. Table 2 under the "Server Installation...

William Bell has commented on Route partition on phone line

1 year 1 week ago
Jaime is spot on (+5 J.). It would be a really good idea if you would take a...

William Bell has commented on Route partition on phone line

1 year 1 week ago
Jaime is spot on (+5 J.). It would be a really good idea if you would take a...

William Bell has commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group

1 year 1 week ago
Danny,On your H323 gateway, can you check to see if you have the following...

William Bell has commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group

1 year 1 week ago
Danny,On your H323 gateway, can you check to see if you have the following...

William Bell has commented on Placed Calls Directory E.164 not correct

1 year 1 week ago
Chad,To clarify, are you sure that the user dials 919803338412 but sees...

William Bell has commented on Placed Calls Directory E.164 not correct

1 year 1 week ago
Chad,To clarify, are you sure that the user dials 919803338412 but sees...

William Bell has commented on IP Phone 7821 doesn't want auto register

1 year 1 month ago
I haven't looked at these phones yet. I do have one in the lab and can test...

William Bell has created Recommendations for Software that Reports on KPIs - CUCM

1 year 1 month ago
Greetings,I am curious what folks use to monitor/manage prescribed KPIs in...

William Bell has commented on Informix queries via ODBC

1 year 4 months ago
I have written a couple of applications using ASP.NET that integrate with the...

William Bell has commented on 6.1.5 to 9.1.2 Jump Upgrade Fails

1 year 4 months ago
As always, great advice from Mr. Huffman (+5 Huff)HTH -Bill (b) http://...

William Bell has commented on Number of translation rules in a voice gateway

1 year 4 months ago
See: http://www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr3/vcr-r1.html#...

William Bell has commented on Informix queries via ODBC

1 year 4 months ago
You won't be able to open an ODBC (or JDBC) connection to the CUCM cluster. If...

William Bell has commented on 6.1.5 to 9.1.2 Jump Upgrade Fails

1 year 4 months ago
I haven't seen this issue when doing the jump upgrade.I think having a...

William Bell has commented on Voice Mail redirecting to a different pilot number or extension.

1 year 4 months ago
Just to clarify a few things.You said that you monitored the ingress call using...

William Bell has commented on Per number call routing

1 year 4 months ago
Whatever solution you apply on-prem is going to come with a lot of editing. I...

William Bell has commented on Keep the configured Extension after EM Logged In

1 year 4 months ago
Shameer,That is definitely an interesting challenge. Natively, EM makes no...

William Bell has commented on IP Address dialing from TX9000

1 year 4 months ago
I would look at the VCS-E to make sure it supports H323 and SIP. You also want...

William Bell has commented on IP phones shwoing previous configurations.

1 year 4 months ago
I would verify the network configuration from the phone's web server. Make sure...

William Bell has commented on Cisco MCS 7800 Series

1 year 4 months ago
Have you looked into using Wake On LAN (WOL) support? Get your exact model and...

William Bell has commented on voip dtmf

1 year 4 months ago
Horacio,What you are describing is call setup or call signaling. In particular...

William Bell has commented on Change LDAP Attribute for User ID

1 year 4 months ago
The key consideration is that when CUCM completes a DirSync operation what you...

William Bell has commented on Can Anyone help to explain why character \ is used in Route pattern.

1 year 4 months ago
Well, I think the proper characterization would be that the design is based on...

William Bell has commented on Dtmf and rtp call process

1 year 4 months ago
Horacio,Call Signaling is the communication path used to set up a new call and...

William Bell has commented on utils service restart Cisco CDR Repository Manager Component is not running

1 year 4 months ago
I haven't come across this specific issue but might I suggest you enable traces...

William Bell has commented on Can Anyone help to explain why character \ is used in Route pattern.

1 year 4 months ago
You use the backslash ("\") character in a route pattern when you want CUCM to...

William Bell has commented on What happened with translatorx.cisco.com

1 year 4 months ago
I am able to get to the site without issue.HTH -Bill (b) http://ucguerrilla....

Bio










  • Cisco Designated VIP

    2014 IP Telephony





  • Cisco Designated VIP

    2012 IP Telephony





  • Cisco Designated VIP

    2011 IP Telephony, Unified Communications









William Bell's Stats

Points6706
Discussion started 32
Answers marked as Correct 350
Endorsed 22
Content Rated 225
Website: