William Bell

Member Since: Jul 25, 2007

English
William Bell commented on CUCM "Parallel Upgrade" in IP Telephony 3 months ago

For anyone who is doing more recent upgrades, the issue Tony points out is also a problem with 11.0...

William Bell commented on Jabber for Mac- Cisco WebEx Meeting Center- Error Message in Jabber Clients 10 months ago

On Mac OS X Mavericks w/ Jabber 11.1 I was able to get the application added to the Gatekeeper...

William Bell commented on Merging two clusters into one in UC Migrations 1 year ago

Close. I would suggest one modification: Upgrade/Migrate one of the existing 8x clusters to 10.5....

William Bell commented on Caller ID Name routing out SIP Trunks in IP Telephony 1 year ago

Greetings, Can you capture and post debug log messages from your CUBE devices? Specifically, enable...

William Bell commented on Jabber Certificate in IP Telephony 1 year ago

Haitham,There are a couple of different design scenarios that may adjust the following...

William Bell commented on incoming called-number question in IP Telephony 1 year ago

VoIP dial-peers shouldn't strip digits on pattern matches. POTS dial-peers will but not on "...

William Bell commented on Spontaeous New Calls When Call is Transferred in IP Telephony 1 year ago

Aside from the statement that the original call is put on hold, the symptoms sound a lot like a...

William Bell commented on is there any way to disable gatekeeper registration requests in Video Over IP 2 years ago

I am not sure which device you are trying to configure but if you are talking about IOS then my...

William Bell commented on DTMF Relay doesnt appear to work CME to CUE in Video Over IP 2 years ago

First, I would check your CUE configuration to verify the DTMF method you have provisioned there....

William Bell commented on CALLS GOING STRAIGHT TO VOICEMAIL in IP Telephony 2 years ago

First off, if you have a TAC case open and you are not receiving a response for 3 months then you...

William Bell commented on CUCM permition to make call. in IP Telephony 2 years ago

Java is correct (+5 J.), you can put an authorization code on route patterns (FAC) but the caller...

William Bell commented on Is it possible to transfer an active call from a PLAR line to another extension? CUCM 9.1 in IP Telephony 2 years ago

I am going to assume that you provisioned PLAR by using a "null" translation pattern (i.e. pattern...

William Bell commented on Creating a succession of forwardings to external numbers in IP Telephony 2 years ago

You can look at using remote destination/remote destination profiles, which is part of the Mobile...

William Bell commented on How can I pass a # sign to my MGCP FXO port? in IP Telephony 2 years ago

There is a CM service parameter that controls whether CUCM will leave or strip the "#" from the...

William Bell commented on Possible to disable intercom auto-answer on CUCM 10? in IP Telephony 2 years ago

That may very well be the best approach. I think CUCM 7.x had the option to disable auto-answer but...

William Bell commented on How to verify voice channels on voice gateway in IP Telephony 2 years ago

Hello, To check clocking you can use the "show network-clock" command. For example: SiteA-RTR#...

William Bell commented on Callmanager call blocking in IP Telephony 2 years ago

Paul,As noted in my comment, calls traversing a SIP trunk into your organization requires special...

William Bell commented on Callmanager call blocking in IP Telephony 2 years ago

Hey Paul, I replied to your comment on the NetCraftsmen site. When there is no CLID presented to...

William Bell commented on CUCM 10 subs in IP Telephony 2 years ago

I'd check the following: 1. NTP sync status on the pub node. Specifically take note of the stratum...

William Bell commented on CUCM compatibility with SRST in IP Telephony 2 years ago

You can find the SRST compatibility guides here: http://www.cisco.com/c/en/us/support/unified-...

William Bell commented on CUCM compatibility with SRST in IP Telephony 2 years ago

Rajeev,It is correct that there is no direct dependency between CUCM and SRST. The SRST version you...

William Bell commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group in IP Telephony 2 years ago

Danny, It isn't as absolute as that. These options are parameters on different systems in your...

William Bell commented on How to change Administrator Username (OS/Diaster/CLI) in CUCM - 9.1.2 in IP Telephony 2 years ago

See the installation guide. Table 2 under the "Server Installation Information" section. http://www...

William Bell commented on Route partition on phone line in IP Telephony 2 years ago

Jaime is spot on (+5 J.). It would be a really good idea if you would take a couple of hours to go...

William Bell commented on CUCM 7.1.3 Outbound calls to Multiple Gateways using Route List / Route Group in IP Telephony 2 years ago

Danny,On your H323 gateway, can you check to see if you have the following command (global config...

William Bell commented on Placed Calls Directory E.164 not correct in IP Telephony 2 years ago

Chad,To clarify, are you sure that the user dials 919803338412 but sees 91980333...

William Bell commented on IP Phone 7821 doesn't want auto register in IP Telephony 2 years ago

I haven't looked at these phones yet. I do have one in the lab and can test this when I get back...

William Bell commented on Informix queries via ODBC in IP Telephony 2 years ago

I have written a couple of applications using ASP.NET that integrate with the AXL/SOAP interface....

William Bell commented on 6.1.5 to 9.1.2 Jump Upgrade Fails in UC Migrations 2 years ago

As always, great advice from Mr. Huffman (+5 Huff)HTH -Bill (b) http://ucguerrilla.com (t) @...

William Bell commented on Number of translation rules in a voice gateway in IP Telephony 2 years ago

See: http://www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr3/vcr-r1.html#wp8518966320Scroll down to...

William Bell commented on Informix queries via ODBC in IP Telephony 2 years ago

You won't be able to open an ODBC (or JDBC) connection to the CUCM cluster. If you want to access...

William Bell commented on 6.1.5 to 9.1.2 Jump Upgrade Fails in UC Migrations 2 years ago

I haven't seen this issue when doing the jump upgrade.I think having a different NTP server IP...

William Bell commented on Voice Mail redirecting to a different pilot number or extension. in IP Telephony 2 years ago

Just to clarify a few things.You said that you monitored the ingress call using port monitor. Is...

William Bell commented on Per number call routing in IP Telephony 2 years ago

Whatever solution you apply on-prem is going to come with a lot of editing. I assume you are going...

William Bell commented on Keep the configured Extension after EM Logged In in IP Telephony 2 years ago

Shameer,That is definitely an interesting challenge. Natively, EM makes no connection between the...

William Bell commented on IP Address dialing from TX9000 in TelePresence 2 years ago

I would look at the VCS-E to make sure it supports H323 and SIP. You also want to make sure that...

William Bell commented on IP phones shwoing previous configurations. in IP Telephony 2 years ago

I would verify the network configuration from the phone's web server. Make sure that DHCP and TFTP...

William Bell commented on Cisco MCS 7800 Series in Unified Communications Applications 2 years ago

Have you looked into using Wake On LAN (WOL) support? Get your exact model and check the Cisco data...

William Bell commented on voip dtmf in IP Telephony 2 years ago

Horacio,What you are describing is call setup or call signaling. In particular, you are asking...

William Bell commented on Change LDAP Attribute for User ID in Unified Communications Applications 2 years ago

The key consideration is that when CUCM completes a DirSync operation what you have is a local...

William Bell commented on Can Anyone help to explain why character \ is used in Route pattern. in IP Telephony 2 years ago

Well, I think the proper characterization would be that the design is based on a loose...

William Bell commented on Dtmf and rtp call process in IP Telephony 2 years ago

Horacio,Call Signaling is the communication path used to set up a new call and to manage/re-...

William Bell commented on utils service restart Cisco CDR Repository Manager Component is not running in IP Telephony 2 years ago

I haven't come across this specific issue but might I suggest you enable traces for the CDR...

William Bell commented on Can Anyone help to explain why character \ is used in Route pattern. in IP Telephony 2 years ago

You use the backslash ("\") character in a route pattern when you want CUCM to treat a wildcard...

William Bell commented on What happened with translatorx.cisco.com in IP Telephony 2 years ago

I am able to get to the site without issue.HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla...

William Bell commented on TFTP Question in Unified Communications Applications 2 years ago

Eric,I don't think it is possible to modify this behavior. The phones will connect to TCP port 6970...

William Bell commented on VCS Cluster and Tandberg Gatekeeper Neighboring in TelePresence 2 years ago

Sonia,To clarify, Tandberg had a product called the Tandberg Gatekeeper before they brought the VCS...

William Bell commented on Call Manager 7.x, Call Manager Express and Firewall in IP Telephony 2 years ago

Sonia,The symptoms you describe are directly related to media negotiation failures. If you are...

William Bell commented on VCS Cluster and Tandberg Gatekeeper Neighboring in TelePresence 2 years ago

Sonia,I hate to say it, but it depends. There isn't enough information provided to answer...

William Bell commented on how to Add users in Unity connection with same Extension in Unified Communications Applications 2 years ago

You would need to leverage the partition and search space functionality in Unity Connection. These...

Bio










  • Cisco Designated VIP

    2014 IP Telephony





  • Cisco Designated VIP

    2012 IP Telephony





  • Cisco Designated VIP

    2011 IP Telephony, Unified Communications









William Bell's Stats

Points6841
Discussion started 32
Answers marked as Correct 350
Endorsed 23
Content Rated 225
Website: