xthuijs

Member Since: Apr 06, 2010

English
xthuijs's Activity on Cisco Support Community
Currently displaying 50 results

xthuijs has commented on BFD Support on Cisco ASR9000

1 day 2 hours ago
not necessarily. dampening merely makes sure that a session is stable up before...

xthuijs has commented on BFD Support on Cisco ASR9000

1 day 8 hours ago
hi tural, bfd dampening is running by default, but you can customize its...

xthuijs has commented on ASR9000/XR: Using Satellite (Technote)

2 days 9 hours ago
hi tural, only the 9001S->9001 upgrade license requires a chassis reload....

xthuijs has commented on ASR9000/XR Understanding and troubleshooting Fabric issues in the A9K

1 week 1 hour ago
if it is marked with a desginated prec or cos (or exp) then yes we can match...

xthuijs has commented on ASR9000/XR Understanding and troubleshooting Fabric issues in the A9K

1 week 1 hour ago
yes this is part of XR 62 which will be telemetry heavy! x

xthuijs has commented on ASR9000/XR Understanding and troubleshooting Fabric issues in the A9K

1 week 3 hours ago
that exists! if the pipeline is getting clogged, and EFD kicks in, a basic...

xthuijs has commented on ASR9000/XR: BNG and Dual-stack ipv4 and ipv6 sessions

1 week 1 day ago
hi pshem, oh sorry yeah this is recent XR6 development so you wont see it in...

xthuijs has commented on is it possible to create l3vpn without enabling mpls in the core and PE routers .

1 week 1 day ago
there is technically no difference indeed sourav.  ldp is used generally...

xthuijs has commented on is it possible to create l3vpn without enabling mpls in the core and PE routers .

1 week 1 day ago
hi sourav, on a PE you can have 2 vpn's right or 2 vrf's let's say. now you...

xthuijs has commented on ASR9000/XR: BNG and Dual-stack ipv4 and ipv6 sessions

1 week 1 day ago
hi phsem, very nice :) also deepak from the bng team mentioned the following...

xthuijs has commented on ASR9000 BNG Training guide setting up PPPoE and IPoE sessions

1 week 1 day ago
your log shows that the system receives dhcp discovers but they are not proxied...

xthuijs has commented on ASR9000/XR Frequency Synchronization

1 week 1 day ago
hi karlo, functionally they are operating the same way. although the hardware...

xthuijs has commented on ASR9000 BNG Training guide setting up PPPoE and IPoE sessions

1 week 2 days ago
hi lantzy, few things that are on hand here: a - a qiq frame received with...

xthuijs has commented on RPL: change prefix attributes based on other prefixes

1 week 2 days ago
yeah your try was very nice, but this won't work either: an RPL is really like...

xthuijs has commented on ASR9000 BNG debugging PPPoE sessions

1 week 4 days ago
hi there, when a session is getting fully activated, it needs an ok from AAA if...

xthuijs has commented on Thousands of Netio drops

1 week 5 days ago
very much possible wblack! if that is causing soo many drops in netio, the...

xthuijs has commented on ASR9000/XR Using and understanding BNG GEO-Redundancy

1 week 6 days ago
with pppoe you may not have to if you can live with session restart/depend on...

xthuijs has commented on ASR9000/XR Using and understanding BNG GEO-Redundancy

1 week 6 days ago
if you have qiq with only session per combo, you will need to shut down the...

xthuijs has commented on ASR9000/XR Using and understanding BNG GEO-Redundancy

1 week 6 days ago
we can make this work! here is what the deal is with amb vlan and geo red/vmac...

xthuijs has commented on ASR9000 Policy 3rd party optics:

1 week 6 days ago
thanks farooq for the update there, also to note, we're looking at making this...

xthuijs has commented on Issue with FPD after XR upgrade 4.3.2 to 5.3.2 on PWR-3KW-AC-V2 modules

1 week 6 days ago
yeah this doesnt sound like a hardware issue Tj, so if the recommendation is to...

xthuijs has commented on MTU L2VPN VFI BETWEEN ASR902 vs ASR9000

1 week 6 days ago
for the asr9000 it is a bit more straight forward, in the l2vpn configuration...

xthuijs has commented on BFD CONFIGURATION FOR eBGP Multihop on CRS

2 weeks 5 hours ago
yup that can be done, some extra config is required. on the endpoint node, we...

xthuijs has commented on MTU L2VPN VFI BETWEEN ASR902 vs ASR9000

2 weeks 5 hours ago
the mtu for the PW is merely a signaling thing and doesnt affect any...

xthuijs has commented on RPL: change prefix attributes based on other prefixes

2 weeks 5 hours ago
we're looking at XR63 which is about a year about, although trying to get it in...

xthuijs has commented on Loopback for pce peer source

2 weeks 6 hours ago
here is a config snippet that our dev test used for verification: pce  ...

xthuijs has commented on RPL: change prefix attributes based on other prefixes

2 weeks 7 hours ago
yeah you're looking for the rib_has_route directive. this wokrs only at the...

xthuijs has commented on Thousands of Netio drops

2 weeks 7 hours ago
hi wblackcenic, yup there is! follow this guide: https://supportforums.cisco....

xthuijs has commented on Loopback for pce peer source

2 weeks 7 hours ago
I checked with the TE dev team and indeed this is supported and should work....

xthuijs has commented on Loopback for pce peer source

2 weeks 7 hours ago
hi coolexer, technically this should work, it makes sense for it to be a...

xthuijs has commented on ASR9000/XR Netflow Architecture and overview

2 weeks 9 hours ago
hi garry, it doesnt look like it made it in xr60/61 will check what the plan of...

xthuijs has commented on Issue with FPD after XR upgrade 4.3.2 to 5.3.2 on PWR-3KW-AC-V2 modules

2 weeks 1 day ago
hi tj, if it is plain IP, then the mpls/label situation wouldnt apply on the 4...

xthuijs has commented on Issue with FPD after XR upgrade 4.3.2 to 5.3.2 on PWR-3KW-AC-V2 modules

2 weeks 1 day ago
fpga6 is concerned on a 2 or 1x100 typhoon linecard with the mac layer. it is...

xthuijs has commented on ASR9000/XR: Understanding and using RPL (Route Policy Language)

2 weeks 5 days ago
hi seyma, hmm yeah you cant really use rpl in that way: using a community...

xthuijs has commented on ASR9K Alarm

2 weeks 6 days ago
aha that is interesting info. it could be the firmware is out of date of the...

xthuijs has commented on ASR9K Alarm

3 weeks 1 hour ago
good for pointing that out, i think I know what is going on, the 3 modules that...

xthuijs has commented on ASR9K Alarm

3 weeks 2 hours ago
so yeah tj, this chassis hw confguration needs for the power manager 4kW, worst...

xthuijs has commented on ASR9K Alarm

3 weeks 5 hours ago
hi tj, The status bits read failed errors reported for tray 1 are due to...

xthuijs has commented on ASR9000/XR: How to use Port Spanning or Port Mirroring

3 weeks 1 day ago
hi dmitry, you probably want to look at: PARSE_ENET_RCV (receive from wire)...

xthuijs has commented on ASR9000/XR: How to use Port Spanning or Port Mirroring

3 weeks 4 days ago
hi evmartinez, this is supported and should work. it could be that the bundle...

xthuijs has commented on BGP Flaps ASR9000

3 weeks 6 days ago
yeah those alarms are not suspicious per-se, they just mean that you have an...

xthuijs has commented on BGP Flaps ASR9000

3 weeks 6 days ago
show pfm location all would be important for that to see which alarms are...

xthuijs has commented on BGP Flaps ASR9000

3 weeks 6 days ago
yeah with NSR the tcp messages are transmitted by the standby RSP, if the...

xthuijs has commented on BGP Flaps ASR9000

3 weeks 6 days ago
hi tj, yeah it doesn't do harm if you like to configure something :), but...

xthuijs has commented on BGP Flaps ASR9000

3 weeks 6 days ago
hi tj, make sure you include the show tech tcp nsr in the case. which will...

xthuijs has commented on ASR9000/XR: BNG and Dual-stack ipv4 and ipv6 sessions

3 weeks 6 days ago
cheers that helps! it wants to send an icmp unreach with the link local address...

xthuijs has commented on High card temperature on Chassis ASR 9922

4 weeks 3 hours ago
I changed my system to the default alititude and I saw my fan speed dropping to...

xthuijs has commented on High card temperature on Chassis ASR 9922

4 weeks 5 hours ago
hi carlos, actually I want to say that these temperatures are not that bad....

xthuijs has commented on ASR9000/XR Understanding DHCP relay, proxy and forwarding broadcasts

4 weeks 6 hours ago
correct, you can use proxy (whereby the a9k will regenerate the request from...

xthuijs has commented on ASR9000/XR Understanding DHCP relay, proxy and forwarding broadcasts

4 weeks 7 hours ago
hi atif, that is not specifically needed, the dhcp server profile can be "...

Bio












xthuijs's Stats

Points1938
Discussion started 0
Answers marked as Correct 163
Endorsed 4
Content Rated 2