zeuscyril

Member Since: May 07, 2008

User Badges:

English
zeuscyril commented on cuc 11.5 call handler in IP Telephony 7 months ago

can you send me screen shot which transfer setting. i tried with options trnasfer rules in the...

zeuscyril commented on CMR Cloud with cucm 11 in TelePresence 11 months ago

hi Aaron, right now i have h.323 standalone for the CMR cloud call and i have one contact with the...

zeuscyril commented on EZVPN nem mode - Internet Access in VPN 1 year ago

hi tomasroberton, i am also trying the same scenario, but i am getting some error can you post...

zeuscyril commented on route internet traffic in site to site vpn in VPN 1 year ago

i tried both client mode and network extension mode. both are giving this error. in the network...

zeuscyril commented on route internet traffic in site to site vpn in VPN 1 year ago

hi philip, what about the option easy vpn  server with hardware client option? i have configured...

zeuscyril commented on route internet traffic in site to site vpn in VPN 1 year ago

i am using SR520 on the remote end. will that support VTI option?

zeuscyril commented on static nat on asa 5512-x version 9.5.2 in Firewalling 1 year ago

hi sarabsin, i have changed the same but still no internet access in that server, here my config...

zeuscyril commented on Can N7K VPC be a L3 Interface? in Server Networking 1 year ago

i am trying to implement the n7k as a core and 4500 as agg and 2960 as access. is it possible to...

zeuscyril commented on logout and missed call notification in IP Telephony 1 year ago

hi jaime,is there any other option which gives missed call information with login and logout option...

zeuscyril commented on logout and missed call notification in IP Telephony 1 year ago

hi manish,if they login again it can show missed calls ? or it cannot show at all. 

zeuscyril commented on Meet Me Issue with CUC and BE 6000 in IP Telephony 1 year ago

hi manish, here the codec configured on the gatewayvoice class codec 1 codec preference 1 g711ulaw ...

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

here the log requested after the changes you requested

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

i tried the same which you mentioned before it was not working,any way i will check it again  . in...

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

"make sure your phone number mask is correct in the phone settings" --you mean to say external...

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

hi zekeria, when I am trying dial normally from the phone extension to mobile numbers I ll get...

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

hi zekeria, the Extension number is 685 Called Number -- 0685 (0XX990685- Full number)and the...

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

here the log which you requested 

zeuscyril commented on caller id on call forwarding calls in IP Telephony 2 years ago

hi Zekeria, here the attached gateway config

zeuscyril commented on cisco jabber guest using cisco be6000 with 9.1.2 in Jabber Clients 2 years ago

I am using local windows authority server .I am using the FQDn only I will just attach the screen...

zeuscyril commented on cisco jabber guest using cisco be6000 with 9.1.2 in Jabber Clients 2 years ago

hi here the message which i am getting locally if try with expresswayi am using windows certificate...

zeuscyril commented on cisco jabber guest using cisco be6000 with 9.1.2 in Jabber Clients 2 years ago

thanks for your message I will try and let you know. and what are the ports needs to forward for...

zeuscyril commented on cisco jabber guest using cisco be6000 with 9.1.2 in Jabber Clients 2 years ago

hi hearhrw, I am mentioning in the jabber guest server route to communication manager not...

zeuscyril commented on Configure PPPoE on Cisco 2911 in WAN, Routing and Switching 2 years ago

hi,after these changes also if you are getting PADI error there should something need to do on the...

zeuscyril commented on Cisco VPN Client Disconnecting Frequently. Reason:422 in VPN 2 years ago

can you send me the exact version of the vpn client as well as the type of OS are you using. some...

zeuscyril commented on VPN not working in VPN 2 years ago

issue on the phase2 only , if phase1 up itself you will get MM_Active message on the sh cry isakmp...

zeuscyril commented on Routing issue: SVI vs Firewall interface in LAN, Switching and Routing 2 years ago

hi you have to do changes in the firewall only as explained by other people. no other go

zeuscyril commented on HSRP issue on Nexus 7018 in LAN, Switching and Routing 2 years ago

hi, can you send hsrp config for both vlans and the status output also

zeuscyril commented on Configure PPPoE on Cisco 2911 in WAN, Routing and Switching 2 years ago

try the following commands in your configdialer-list 1 protocol ip permitinterface Dialer0 ip...

zeuscyril commented on Redistribution of Static Route into EIGRP on Nexus 5000k in WAN, Routing and Switching 2 years ago

hi , in eigrp you cannot use default-information originate command like ospf.so you have use the...

zeuscyril commented on Windows 8 installation of VPN Client Software (x86 64-bit version) results in "Icon09DB8A851.exe" on startup task in VPN 2 years ago

hi the best vpn software to be used for windows8 will be "schrew soft vpn clinet" for cisco based...

zeuscyril commented on PAT blocking IPsec in VPN 2 years ago

hi, you have to use route-map for this problem create the NAT access-list and apply with route-map...

zeuscyril commented on vpn encryption in VPN 2 years ago

there are different kind of VPN methods in that If you are using IPSEC vpn the both are same ,...

zeuscyril commented on vpn ipsec tunnel not working in WAN, Routing and Switching 2 years ago

please add ip nat outside command in the WAN interface. rest changes looks good and check first...

zeuscyril commented on Slower download speed when connected through the 871w router... in LAN, Switching and Routing 2 years ago

hi terminal38, by default the mtu size for PPPOe is 1492 . that makes big difference even with...

zeuscyril commented on How to open port for FTP in Cisco 881 in WAN, Routing and Switching 2 years ago

is 192.168.1.161 your local FTP server? please answer i can tell you how to open the ports

zeuscyril commented on VLANs unable to reach outside world in LAN, Switching and Routing 2 years ago

hi Joshua, here the config you need to addaccess-list 101 permit ip 10.1.10.0 0.0.0.31 anyaccess-...

zeuscyril commented on VLANs unable to reach outside world in LAN, Switching and Routing 2 years ago

hi joshua, can you send me your nat access list. i believe you are not added in the nat accesslist...

zeuscyril commented on Slower download speed when connected through the 871w router... in LAN, Switching and Routing 2 years ago

hi terminal38, if it is a PPPOE connection from ISP check the MTU value on the interface of 871 w. ...

zeuscyril commented on bandwidth allocation in cisco 2921 in WAN, Routing and Switching 2 years ago

this is what i confiured, class-map match-all Guest match access-group name HA-Guest!!policy-map...

zeuscyril commented on bandwidth allocation in cisco 2921 in WAN, Routing and Switching 2 years ago

hi Nage, i am using 2921 as a transit network ,it doesnt have multiple sub interface for VLAN , all...

zeuscyril commented on HSRP In 3 switches in LAN, Switching and Routing 3 years ago

yes all my access switches are connected in the 2 core 6500 and we have connected some critical...

zeuscyril commented on HSRP In 3 switches in LAN, Switching and Routing 3 years ago

hi Jon, all the important devices are connected to 4500 only like servers , routers , firewall1....

zeuscyril commented on Excessive IGMP Snooping statistics. in LAN, Switching and Routing 3 years ago

hi sean,i am also having the same log and same issue did the above configuration solved your issue...

zeuscyril commented on igmp statistics in LAN, Switching and Routing 3 years ago

hi arjmenon,in my 6500 series switches i already two vlans with the following configuration  down (...

zeuscyril commented on MPLS using ripv2 bridge in MPLS 3 years ago

Hi G In Site-B I have 2 different subnets. In that I need to route 2 different default originate...

zeuscyril commented on MPLS using ripv2 bridge in MPLS 3 years ago

hi Giuseppe,thanks for your reply,suppose if i have different subnets on the both end then how i...

zeuscyril commented on dx650 with be6000 9.0 in IP Telephony 3 years ago

hi aman,i upgraded the BE6k to the following versionSystem version: 9.1.1.20000-5but still i cannot...

zeuscyril commented on dx650 with be6000 9.0 in IP Telephony 3 years ago

hi aman,is it possible to upgrade 9.0 to 9.1 without any license ?or we need to have software...

zeuscyril commented on dx650 with be6000 9.0 in IP Telephony 3 years ago

hi aman,i restarted the be 6000 after upload .and i dont have any cluster here i have only one CM...

zeuscyril commented on required firewall product in Firewalling 3 years ago

hi marvin,thanks for your explanation.this is just the requirement from my client i also explained...

Bio

User Badges:

zeuscyril's Stats

Discussion started
Answers marked as Correct
Endorsed
Content Rated