zoltanszasz

Member Since: Mar 22, 2005

English
zoltanszasz commented on Need info on CCT training materials for all 3 CCT certifications. in Training 1 year ago

I don't know much about complete study material about CCT, and it's not that much a prerequisite...

zoltanszasz commented on cisco 2811... more interfaces? in LAN, Switching and Routing 1 year ago

See here, says 4 allowed, try filling slots from lowest to highest.http://www.cisco.com/c/en/us/...

zoltanszasz commented on Definition of class E IP addresses used by Cisco in Getting Started with LANs 1 year ago

I sent in errata in the past with Cisco Official Guides and stuff, nothing changed. If you...

zoltanszasz commented on cisco 2811... more interfaces? in LAN, Switching and Routing 1 year ago

Check here module, router support and IOS version needed: http://www.cisco.com/c/dam/en/us/products...

zoltanszasz commented on How to Block Specific URL In L2 Switch in LAN, Switching and Routing 1 year ago

You cannot block URL in a L2 switch.

zoltanszasz commented on ISR 891 - Recommended = 50 Users ? in LAN, Switching and Routing 1 year ago

4431, 4451 has 4 I believe. I don't know reasoning, scalability probably. You can add anyway WAN or...

zoltanszasz commented on Stacking a 3560 in LAN, Switching and Routing 1 year ago

It was just explained above that you can't stack with 3560's :P You will have to manage them...

zoltanszasz commented on Boot system flash: does not appear on 2960 running config in LAN, Switching and Routing 1 year ago

I hold 2 images just fine :P Directory of flash:/    2  -rwx     2664051  Mar 01 1993 00:03:54 +00:...

zoltanszasz commented on ISR 891 - Recommended = 50 Users ? in LAN, Switching and Routing 1 year ago

There are some PPS values you should check when buying routers. Or some routers can process more...

zoltanszasz commented on Upgrade Advice in LAN, Switching and Routing 2 years ago

Quick question: why you need POE in distribution ?

zoltanszasz commented on UC300 Training and Tutorial in Voice Systems 4 years ago

Video not available anymore !

zoltanszasz commented on Core Switch Migration.. in Getting Started with LANs 4 years ago

why not map and document network with Lansurveyor or cisco LMS?

zoltanszasz commented on Unable to connect from Putty to Cisco Switch in Getting Started with LANs 4 years ago

Did anybody think that the switch console settings are messed up? Try different speeds on your...

zoltanszasz commented on Why is the first address on a subnet reserved? in Getting Started with LANs 4 years ago

Broadcast is used to send out message to all computers in a network (inside communication), network...

zoltanszasz commented on Why is the first address on a subnet reserved? in Getting Started with LANs 4 years ago

Seriously, that dislaimer is one mile long and confusing !

zoltanszasz commented on Network setup? in Getting Started with LANs 4 years ago

i don't know how many concurrent calls that AP could handle and price is more expensive fow...

zoltanszasz commented on Upgrading a business network in Getting Started with LANs 4 years ago

HIt me up at [email protected] with a list of equip. what you have now at each office and i look over...

zoltanszasz commented on Dial to CISCO router in Remote Access 4 years ago

Here is how is done:http://www.cisco.com/en/US/tech/tk801/tk36/...

zoltanszasz commented on Port Forwarding in Remote Access 4 years ago

Outside IP is public: but static or dynamic? If is dynamic then you have to configure also some...

zoltanszasz commented on Router Password vs User Password in Remote Access 4 years ago

See here double authentication:http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/...

zoltanszasz commented on when Serial Goes Down and ISDN Picks Up configure required in Remote Access 4 years ago

See here a list of ISDN configuration examples, what you need is Dial On Demand Routing.http://www....

zoltanszasz commented on Problem with ISDN on c2600. in Remote Access 4 years ago

taken care?

zoltanszasz commented on Problem with ISDN on c2600. in Remote Access 4 years ago

So i read around more on this, very interesting situation and few people kinda have same issue.1....

zoltanszasz commented on Problem with ISDN on c2600. in Remote Access 4 years ago

Telcos power up the lines so it is their interest to break up connection if lines not in use.Try...

zoltanszasz commented on Cisco SOHO 800 Router Ports / iOS in LAN, Switching and Routing 4 years ago

Your router does not support SDM, see here more info: http://www.cisco.com/en/US/docs/routers/...

zoltanszasz commented on Can't access asdm on asa 5505 Cluster in Remote Access 4 years ago

Cisco did not keep up with Java advancements, check your version. As i know so far some SDM ASDM's...

zoltanszasz commented on Monitoring Web Activity in Getting Started with LANs 4 years ago

implement ClearOS in the network

zoltanszasz commented on Redesigning a small network in Getting Started with LANs 4 years ago

I would go modular and not buy an one unit option. In time you extend better, or change just parts...

zoltanszasz commented on Physical Security Training in Training 4 years ago

I never seen in depth information on physical security on the cisco site. You should check out apc....

zoltanszasz commented on CCNA Prep Materials (Books, Videos, Sims) in Training 4 years ago

Books -> Wendell Odoms CCNA books 3rd editionJeremy Cioara's CBT Nuggetsa good simulator is GNS3...

zoltanszasz commented on SDM stops on startup "Discovering router hardware attributes" in Other Network Infrastructure Subjects 4 years ago

what i would do next is to SDM another router with different IOS image to see if that works.

zoltanszasz commented on Break Issue with 2620 in Getting Started with LANs 5 years ago

Jumper J3 on the motherboard of the Cisco 2600 and  3600 Series Routers controls the speed reset....

zoltanszasz commented on WS-C3560 external power in LAN, Switching and Routing 5 years ago

use a PoE Patch Panel for the rest of the phones...

zoltanszasz commented on Username in Getting Started with LANs 5 years ago

In the GNS3 main window you can right click the router and go to Config file section, there you...

zoltanszasz commented on Network Engineer - Linux? in Getting Started with LANs 5 years ago

There is a book: Linux Bible. Starting from differences between different Linux...

zoltanszasz commented on Get blank screen after I put in user/pass!! in Getting Started with LANs 5 years ago

What kind of router you have?Did you try configure it from a wired port? If is an IOS router  the...

zoltanszasz commented on CCENT/CCNA Beginner Lab Setup HELP!!!! in Training 5 years ago

For switching try to buy from the 2950 series so you can exercise QOS and other usefull stuff what...

zoltanszasz commented on cisco sdm no longer available to download in Training 5 years ago

It will probably fade soon, documentation stopped in 2008 as I see. In Windows 7 are huge Java...

Bio












zoltanszasz's Stats

Points15
Discussion started 0
Answers marked as Correct 1
Endorsed 0
Content Rated 66