Accessories
Please post here your questions for Headsets, Cameras and any other Cisco Accessories
112 PostsActivity in Collaboration
Does cisco announces VG320 and VG310 eol?
We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired.End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EMAre VG320-EM and VG320 are the same hardware and already...
IP Phones 8864 or 8865 - No Audio Issue
Hi, When a call is made to 8.XXX.XXXX x1145 from a video phone on the A end in this case an cisco 8865 with x2222. The call establishes with auto attendant on the B end and then presented to the end user at x1145. The B end user picks up the call and...
I need to store 256 characters in a UCCE variable, looking for ideas.
I want to build a Finesse gadget that sends data to an API, this API needs a 256 character unique ID I receive when the call first arrives to Cisco. The format is generally something like this f34bc05d-5ea5-4091-adc7-67a03e1234f9 however the document...
Issue redirecting inbound sip calls to second sip trunk
Hello,I'm new to SIP. I have CUCM v14 BE6k with managed SIP as our main phone service. The SIP provider sends us 4 digits. We are deploying a new IVR service which will connect over sip to our call manager. I need to redirect inbound calls from an ...
Webex Connect Email with Webex CC - RONA
Could anyone please guide me on how to meet a requirement for Webex CC email management? I've successfully configured the initial settings and can accept and send emails from the Webex CC agent desktop. Now, I'm attempting to display previous emails ...
admin scripts to routing script mapping in UCCE
Any ways to check admin script to routing script mapping?I can see user variable is common for both. But unable to find any SQL queries to find user variables mapped in admin and routing scripts. please help.
CUCM 14 - Hunt Pilot Call Pickup
Hello, We are running CUCM v14. We have several call pickup groups which work fine if the phones are dialed directly. The phones are also in a line group and I want to configure a pickup group on the hunt pilot. The Hunt pilot, pickup group and direc...
Problem on CIsco SX20 shared with MS Teams
Good morning,Thank you in advance for your help.We have a room where we have installed a Cisco SX20 videoconferencing system with a Cisco Touch 10. The problem we are encountering is that when we are in a meeting, an external tries to share screen an...
Audio dropping cisco Quad cam
Hello,I have a new install with Codec EQ with quad cam, and quite often, the audio coming out of the speakers from the quad cam drops and is very low, even if the volume is at 100%.Does anyone have this issue?Thank you
Resolved! No answer ring issue
CUCM 12.5, I have a Line Group with 3 users, top down then hunt pilot to VM. The RNA Reversion Timeout is set to 15 (per Cisco). One of my users (the first in the line group) sent me a message saying that incoming calls ring to her phone about 10 t...
Dumping CUCM Fresh Install Logs - Virtualization
IntroductionProblem DescriptionProcedureNote IntroductionThis document covers the Procedure for Dumping CUCM Fresh Install Logs - Virtualization Problem DescriptionIn order to dump install logs on a virtual UC installation, it is necessary to use a ...
MX800 - How to config the camera
Hello,I work on GE in Brazil and we have a MX800 on a room. I was able to share the screen on it, to see myself on cameras, but I couldn't share the video recorded on camera on a Teams Meeting. Can someone support me on how to do this?
Resolved! UCCX CUIC - SMTP From address for e mailed reports
Where does one set the FROM e mail address used by CUIC report scheduler to e mail reports? I thought I knew....but it isn't where I thought it was. And I cannot find it in any documentation....
Intermittent Static noise on phones
We are a healthcare facility. For past several months we have had several complaints from users that calls are often full of static. We are running CUCM 12.5(1)SU8 and the phones are primarily 8811 running current firmware. We have replaced phon...
Expressway Single Domain 2 Seperate Expressways
Hi,We have a customer using HCS. As part of this we set up Expressway for them during the first lockdown for them to be able to use Jabber remotely for voice only (no IM&P). They use the same domain name internally and externally e.g. abc.com Another...
| User | Helpful Count |
|---|---|
| 52 | |
| 38 | |
| 37 | |
| 23 | |
| 8 |
