Cisco Physical Access Manager Badge Designer and Enroller

kbarra · ‎08-08-2010

Has anyone worked with the Badge Designer and Enroller Application? We need to confirm that the following Camera and Badge Printers will work with the application:

Camera - Canon Power Shot G5

Badging Printer - Fargo Persona C30

Secondary Badging Printer - Eltron P420

If anyone has seen a compatibility matrix for CPAM it would be helpfull.

mcwalter · ‎08-16-2010

I asked Cisco about this one. Here is what they said.

I have contacted the Business Unit about this case and I was advised that Fargo Persona C30 printer and the Eltron P420 are supported with the CPAM application. Also, they have used a Canon Powershot S2, but not a G5. As long as the camera has a TWAIN driver for Windows it should work.

Hope this helps.

derrickmunro · ‎08-31-2010

Available Printers:

FARGO (www.fargo.com)

HDP600 Card Printer

HDP600 CR100 Card Printer

DTC550 Card Printer

DTC400e Card Printer

DTC400 Card Printer

Persona® C30e Card Printer

Persona® C30 Card Printer

Magic Card (www.ultramagicard.com)

o Enduro Card Printer

o Rio2e Card Printer

o Tango 2e Card Printer

o Tango +L Card Printer

o Prima 3 Card Printer

o Alto Card Printer

o Avalon Card Printer

o Tempo Card Printer

o Opera Card Printer

Evolis (www.evolis.com)

o Dualys 3

o Pebble 4

o Securion