Application Networking

All,Trying to mark traffic to/from L4 rules in the ACE.Documentation (like always) says it's really easy.  Mark traffic by using the "set ip tos <value>" command in Policy/Class configuration.  Ok, so I do this, set ip tos 24.Enable qos globally on t...

Hello!In out testing enviroment is a strange loadbalancing behavior. because of the migration from iPlanet-Webserver to Apache there are currently some tests with 1 Apache and 2 iPlanet servers. the servers have the same hardware. the operation syste...

Hello Everyone,Does anyone know if the WAAS helps out with very high application turns? We have an Oracle applicatoin that we're trying to run across the WAN but it runs super slow, even through the WAAS. The application runs really fast on the local...

Bit of background, before my wonderful problem.  Have installed a pair of Ace 4710 LB's.  Their purpose is to control traffic coming in from a remote company, while local users do not use the LB's (this is temporary....but the LB's fit a requirement)...

Hello,I need some help in setting up URL filtering.I.E http://test.com/class/results.asp?search_type=class&display_full=1&cn=&ct=0&cs=0&k=%27%3BI want to look for characters in that link such as ' or ; and drop the traffic if it matches it or to send...

what is the improviment with the command "ip wccp 61(62) accelerate" in a 2800 or 3800 plataform? Will it decrease cpu utilization?

We have a ACE redirect configured on 3 physically seperate ACE modules with the following config. It works on one ACE Module and not on the other 2.Capture on the ACE and sniffer gives this error.R [bad tcp cksum 2d41!] ACE sends resets to the client...

Hi Guys,I'm looking to configure dynamic cookie learning on the CSM such that the CSM learns the value of the Cookie set by the server.  I wanted to know how this is configured - i'm assuming it is done as follows, for a case where the server sets th...

Hi,I have a question regarding the use of "advance-balance arrowpoint-cookie" for sticky load balancing.My question is whether the string command is necessary in the service in order for sticky load-balancing to work? We noticed recently that it say ...