how does fragmentations works when sending a large file (video or data) over 1500 bytes? does a router fragment the packets? Is it safe to increase the default MTU over 1500 bytes?Franco
Hello,We (Aspera) are an application vendor and our application uses UDP. We have a customer with a Cisco CSS 11503 device and it looks like that device is altering the UDP source port of UDP packets as they flow back out the CSS device.A _simplified...
Our ACE is configured and seems to be working correctly and now we would like to enable stickiness. We are receiving an error: Error in saving to DB: Can't create sticky because resource is not allocated. We have created system resource class, but no...
I set my WAFS solution, and had run WAAS, I can see now that I no longer speeding traffic, the cache only works, but if it works it is CIFS, should live with the WAFS WAAS, or an application is different to another?henry
Hi,I have a small problem to get the redundancy to work between two ACE modules. The configuration is very basic, just to get the redundancy to work.ACE1ft interface vlan 10ip add 10.0.0.1 255.255.255.0peer ip address 10.0.0.2 255.255.255.0no shut!f...
Hi,I am trying to add a printer to my edge wae printer server but it for some reason I can not associate the drivers to the printer. Each time I follow the instructions in the cisco manual to associate the driver, I get a grayed out interface at the ...
Hello, I'm running a capture in on 2 interfaces in an ACE module context. I can see from the the dir command that there is only 1024K free left.Is there any way to allocate more menory to that context so i can increase the the catpure buffer size w...
Hi,I have a basic question regarding CSM...Is there a way to configure a server behind a CSM without load-balancing a traffic to that server? In other words, I dont want for CSM to see a traffic to specific server, only to pass it without any interve...
Looking for any feedback or metrics that may have been gathered by others as part of analyzing the benefits of WAAS when accessing a single instance of SAP for a global user base. Bandwidth reduction per user, TFO metrics, end user response time mea...
Hi,I think i have a very simple question.I want to setup an HTTP probe to test for URL, like http://www.cnn.com/When I specify such "request" command under probe confif menu, I would assume that ACE will need to perform name resolution for www.cnn.co...
Hi,I have created a self signed certificate on the CSS 11500.It's a certificate for internal use. How long is this valid.I used the command:ssl gencert certkey "cerkey" signkey "signkey" cerfile "password".I read it is only valid for 30 days? Can i...
Hi Guys,I have setup my ACE module to authenticate against my ACS V4.1 AAA server.However I keep receiving the message invalid password in the ACS logs when i try and login to the ACE module.However the I know the username - pass is good as I already...
i have two ACE Module in different chaissesi want to make Data-Center1 primary for all contexts and Data-Center2 standby for all contexts there is no commands Primary unit and standby unit like FWSMhow to acheive that?
Hi,I have to configure two CSS11503 to forward the connection request from two servers to CPEs. The problem is that the CPEs are in various subnets.Now, I think that I can't use the service and the group command but the nql command.Could anyone tell...
The "Appliication Mix" graph on the opening page of the management console shows a lot of "Other Traffic". Is there anyway to get a breakdown of what "Other Traffic" is?