Application Networking

I have configured my 11051 to talk to my syslog server, but I do not receive any messages from it. Has anyone had any luck with this?

I'm using ACNS 4.2 on a CE 507I'm having problem with NTLM auth. It suppose to be transparent to a users logged in the NT domain but sometime, some of them receive a pop-up window asking for username, password and domain.Anybody got this problem or c...

I have a customer doing basic load balancing. There is a vendor here that said he had seen at another customer location a setup as follows: If both/all servers are taken down for maintenance, client HTTP requests would be redirected to an HTML pag...

I've got a CSS11503 running WebNS 7.10 and need to upgrade to 7.20. Ethernet management port is part of my management VLAN. I can ping the other equipment on the management VLAN and the default gateway.Now, my FTP server (with the 7.20 image) is loca...

We are trying to load-balance print server connections between 2 MS print servers. When we try to connect to the print servers name, (\\PS01) or even the VIP address, we get a Path not found error. However, if we direct the path to the actual name ...

Scenario:client ---> CSS with valid layer-3 (IP) content rule ---> server (TCP port 80)-Client connections made to server port 8100 are RST by the server.-Subsequent connections to the server's port 8100 from those same clients are not being forwarde...

I am looking at an cost effective way of restricting and monitoring staff from using the Internet.Would an content networking device be worth looking into? or should I be looking into an Web monitoring application?

Can anyone share if it is better to put a health probe under a real server or under the server farm. Is there is any advantage to either way? We are looking at doing a get url.thanks in advance

Has anyone had any success running keepalives for radius services running on servers behind the CSS? All of the other keepalives seem to work just fine by defining the keep type, port, freq, retries, etc. From what I've read there is a script that ...

Can a user pull content from the CDM using SSL? If so how would this be set up on the CDM?Thanks

Hallo,Can I configure ce 507 CDN as a cache engine, if can please give me an example.thanks

Hello,I recently tried to download a large file from the internet and half way throughI cancelled it. Later on I downloaded the file again, can anyone tell me if part ofthe file was cached and I received that the second time or was it a new download ...

How can we backup or export CE/CR/CDM configuration database?This may be required in case existing CDM (having CE/CR/CDM configuration) is failed and a new CDM is installed without having any knowledge of previous setup. So, how to repopulate the CDM...