Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
When we do a long-distance call, and forgot to dial 1 first, the call is ringing, and ringing and ringing always without answers.If we hang-up and then dial 1 and the 10 digits numbers, the call is redirected correctly . I know we recently changed l...
Hi there, The calling party could not hear the ring back from the called party with local call, the call will be answered after a few second. However the national and international calls work well. Is there anyone who can help me with that? The log ...
I have a Cisco 7965 IP phone and I want to hard reset it since it is not working properly. I plug the ethernet cable while pressing the # button. Immediately speaker and mute button flashes for a second and then the 6 phone buttons start to flash. Th...
I have this symptom on some phones. When a button is pressed, for example the settings button, the phone does nothing. Also when I try to dial a number. After a few seconds the pressed buttons are executed delayed. After a reset of the phone, the pro...
Hi, I have a Cisco 2901 router configured as a Cisco IOS Voice Gateway. The 2901 has a one-port E1 card with its port connecting to a PBX using Q.931/ISDN and one of the GE ports connecting via Oracle Acme Packet 6300 SBC to a Genband C20 soft-switc...
Hi All, Are all phone models are MLPP supported. We have 3905, 7821, DX650, DX70, DX80, 8851, 8865 IP phones available. Can anyone one please help with the basis MLPP configuration. I just want to showcase MLPP feature between extensions to the highe...
I purchase FL-CUBEE-25 , now how can i put this license in router there is no PAK key.
Hi guys, I've read this article but I want to clarify some things. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeauth.html We have 2 sites for example one in Athens and one in London and we have connec...
Hi All, Phone CIPC----------------------CUCM----------------------SIP Trunk------------------------------3rd partyUCCX when using g711 alwaw working fine we want to use ilbc from CIPC(region) configured with two different region with 16kbps ilbc g7...
is there a option to see a device if off hook in a BLF? Currently we have BLF for the primary DN but it does not show "Off Hook" when on a line appearance other than the DN.
I was wondering if there was a way to view an unknown or masked number calling my extension in Call Manager. The number comes in as unknown or the number is masked at times, so i don't know who's calling me. How can i find out what that number is?
We have all CUCM v11 clusters. We are still using ICT trunks between them but would like to switch to SIP to display presence status. I've setup Trunks that connect between the clusters using SIP but I haven't been able to get presence or calls to go...
Hi i need help with cisco phone 7942 , awe 2 phone that get down and when i replace them they get ip address exmaple when i do : #show ephone registered ephone-41[40] Mac:xxx.xxxx.8C76 TCP socket:[4] activeLine:0 whisperLine:0 REGISTERED in SCCP ...
This upgrade came out on Nov 1st and is supposed to fix bug CSCuu78454. The bug says that it will cause a memory leak. So far we have not seen increased memory use on our systems. Has anyone seen any issues with this latest version or with memory le...
Hi, I have a CME with 15.4(3)M3, we detected an issue with conference when there is a remote party This CME communicate with central site via MPLS, in central site there is an AVAYA PBX. users from CME dials to AVAYA users with 4 digits, there ...
