Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
So I have customer on CUCM version 9.X and they are adding DNS. When they went to add DNS it spit out the error message that it will invalidate the license file. I know on previous version of CUCM they used license MAC's and changing ce...
Hello Friends, Could some one explain me what is called Codec Pass-through is all about. I have tried reading many documents and all it says is about the fax and modem pass-through. But I know this command is inserted under MTP and Transcoder in IO...
Hi guys, I have a Cisco C881-V-K9 in France and I have connected two BRIs to my Telco. I attached a file with a call test, debug isdn q931 and debug isdn q921.I have a problem with BRIs.When a made an inbound call, all channels try to get the call as...
Hi I'm not sure if this is the best / right place to do a feature request, but I know many community members are waiting of this feature.Hopefully sometime it would be able to transfer a call to a member of the corporate directory intuitively. - acti...
I have a CCM v9 Cluster in a campus environment. We are migrating from PRI's to SIP Trunks. We will have 4 SIPT's terminating in 4 different locations. Our SIPT's will be configured using session pooling. Essentially, all 4 SIPT's are aggregated. We ...
Upon FAX tone detection the TSP sending SDP to switch call to T.38 for FAX transport, But Call Manger is sending SIP error "488 not acceptable media" to this switchover is not hapenning. Find the attaced Flow Diagram from wireshark. 10.116.10.12 is...
Hi, we have an UC560-BRI-K9 integrated router. This UCME contain a two free vic slot. For now we use only two integrated BRI ports but, if we installing other two VIC2-2BRI-NT/TE to implement more external ISDN line, we need also other license for it...
Hi GuysI have a issue, in the CUCM 9.1 with high CPU utilization on Openssl process (99%). The CUCM is publisher . The subscribers are below of 10%.Please see the attachment. Any idea?TIACristian
Hi there all, I want to ask is there a date when windows 10 will be supported in the cisco desktop agent matrix For now, when I am right cisco supports windows 8.1 as highest windows operating system, correct me if I am wrong. thanks in advance for...
Hello all, I am in a situation that DNS server needs to be changed. So, the DNS on Unity Connection will be changed accordinly. Question: How I could deal with Unity Connection license? When testing, I received the message " the license wil...
Hi everyone, I'm troubleshooting an issue with an environment that has 2 CUCM, 2 CUC and 5 Gateways for different locations. We had an issue where the publisher server went down and when making calls to 1 specific site, it was RNA. All other sites a...
Hi, I am trying to configure 8865 phone on cucm version 10.0.1. But there is no phone type as 8865. 8865 phone datasheet says that it is supported from 8.5.1 and later. will this solves If I install a device pack ? Regards, Aneesh
Dears, today i installed the cup subscriber 8.6.4 and all went smooth till final reload, once it came up when was trying to login in serviceability page to activate the service, i was not able to login neither in administration but i was able to log...
Here is some background. Our office currently runs off of a hosted CM. It's SIP from our GW to the service provider. And the CM uses SIP trunks for routing. We are building out a new internal CM that we will eventually cutover to. We have setup an h3...
Hi All,can some on assist me configuring a cisco 8831 ip phone (conference)i have configured the phone on call manager and it came up fine however the daisy chained base does not.power is connected but not configured how should i make it workthanksR...
