Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hello guys can anyone tell me what the problem hereAnd thanks
Hello All,CallManager Version: 8.6.2.24901-1I am looking to monitor some of the Media Resources in our Cisco VoIP network, like CFBs for example.I went to: RTMT > System > Performance...In there I opened the following charts (*which I will list below...
Does anyone have Cisco Unified Communications Manager interface specifications for basic or advanced SIP signaling with third-party Polycom SIP phones ? Have you installed? Thanks,
We have a UCCX in 10.5 ver and CUCM 10.5 with IP Phones 7841 for the agents. Their primary line is a personal line and the secondary button in their ICD line is a different partition with number of calls 2, busy trigger 1. Randomly the phones stop r...
We have a large mixture of Wireless headsets with our 7965s (SCCP 9.2) and CallManager 8.5.I want to use Bulk Edit to globally enable the “Wireless Headset Hookswitch Control”. Is it safe to do this? Or should I only do it on headsets that support ...
Does anyone have Cisco Unified Communications Manager interface specifications for basic or advanced SIP signaling with third-party Polycom SIP phones ? Have you installed? Thanks,
Dear Cisco \ Support :I'm trying to use Call Manager the unified , to change the user name that is being displayed on the ip phone but i cant' get that done , please assist me because i have a time line to get that done .I had read the manual also so...
I want to purchase data-k9 license to upgrade on Cisco2911/K9. How can i do ?
I was asked by a customer to setup a toll free number to ring an internal extension for example extension 2095 which is a HP that will ring 3 extensions included in the line group in top down order and then if there in no answer to roll to voicemail....
Hi ,Reading through the SIP timers, I came across the Timer C in proxies. Does anyone know what timer it is timer C in CUCM please? I am using CUCM 9.1.2. Thank youKind regardsG
Hi,Can somebody tell me how to localize a no. if call is coming from national no. using calling party transformation pattern. Call flow:- My national no. is 04554558000 (On PSTN)----->+1 and strip digit= 1(Globalization on MGCP gateway on cucm).Now c...
Dear AllWe are going to install Cisco unity connection v10.5 as subscriber for the exiting unity connection , during installation we got the attached error . We are using Cisco UCS servers Cisco Business Edition 6000 M Svr (M3) and OVA for unity conn...
I have Cisco UC Phone Model 7942G bearing Sr. no. FCH17129NCS. wewants to install it with third party exchange. please provide support mehow to install it.
Hello, on my router I am currently identifying 'cs6' marked outgoing traffic and re-marking to 'ef'.Vice versa, when incoming 'ef' traffic comes back in to my interface, I want to convert it back to 'cs6'. Would my code below achieve this ?Thank you ...
I am configuring H323 protocol between CUCM and other PBX for voice service. I have managed to make some remote sites work, but some others do not work. The flow would be the following: CUCM --> Main GW --> Remote GW --> Remote PBX, all through H32...
