Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have a remote site running 12-4-24.T configured for SRST Multicast MOH. It works well for our LD calls going over ds0-group 1, since I can do a show ccm-manager music-on-hold and see the packets incrementing. When a call comes in over the FXO lo...
Hi everyone, thanks for reading this post im working on a project that need to implement french language, so i download the User local , network and phone only files for french that are compatible with my cucm version, here is the scenarios:i configu...
We have UCCM 8.6. Management wants to allow some of our external users to call in using their cell phones, and then be able to get a dial tone and make outbound calls, so that when they call the customer, it comes from the company and not their cell...
want to connect with CISCO CUCM via E1 GW-VOICE vs a MD 110 but this only supports DPNSSFor this I need an intermediate device( VG or westell)? or only with configuration in the Cisco 3945?
I currently have a UC520 with 3 x Cisco 7975G phones. I need a few more phones. From what I can see, the 7975G and 9971 are about the same price, however the 9971 is newer. Is there any reason to stick with the 7975G?Thanks
Hi all,I want to buy a 2821 router with an EVM-HD-6FXO module. The 2821 is running IOS "c2800nm-ipbase-mz.124-15.T10.bin". My question is can I use the 2821 as a Gateway for CUCM v10.5 or if I have change upgrade the IOS to a different version. Thank...
Before I place the order for the licenses I want to make sure which ones I need. Cue will be used as Auto Attendant and Voicemail I need 20 mailboxes. Which licenses do I need? Its version 8.6.7 NME-CUEIs this combination right? I'm not even sure...
Hi everyone recently i created a SIP-TRUNK connection to an VOIP service provider, the calls works just fine but the ring-back tone since you dial the number until someone answers were unable to hear it!!! Does any one know why??? Thanks for your co...
Hi, I'm aware of the cluster wide parameter "hold reversion duration", I have a particular site we'll migrate that wants to mimic this feature, currently on their PBX, but I don't want to enable it cluster wide. Is there a way to do this for a sele...
Hi.Need clarification about results of sh mls qos interface X/X statistics.#sh mls qos interface Gi1/0/8 statisticsGigabitEthernet1/0/8 (All statistics are in packets) dscp: incoming------------------------------- 0 - 4 : 650153 0...
Hi ,Is there any way to get report for missed calls in Cisco CDR or we need to go for some third party application? regds,aman
Does anyone know if you can change the product type in the device profile once it has been created. Example: Profile was a 7960 now we want to migrate the profile to a 7962. Thanks
Hi all We have an issue whereby we have some fax numbers that come in on one of our ISDN's but these devices are on another site.we have call manager on the main site where the numbers come in, then these fax numbers need to route to another telephon...
Hi,I´ve got a request from a user who wants to see who picked the call from the hunt group.When a user is member of a hunt group an gets a call from for the group and doens´t answer it, he will get an unanswered call in his call history. How can he b...
Hello,I have a CUCM 9.1.1 and Cisco 3925 VGW. I configured 3 E1 using MGCP. When I did an outgoing call, the call is going through the second E1 port into the route Group. I suspected an issue on Telco side. When I configured H323, the first E1 port ...
