Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, existing I only running 1 unit Unity Connection and yesteday i had add in the subscriber and have configure neccesary parameter for HA. During I test down the publisher and can saw subscriber had take over the role as primary, but I fail to reach...
Good day! I have a following issue with a network connection for a computer. If I switch on the computer in a phone the computer doesn't have a connection to a network. A phone 6911 works without any issues. If I switch on the computer without a phon...
Hi,I use 802.1x Authentication for IP-Phones, EAP-MD5 method.If there is an opportunity to deploy shared secret via CUCM to all IP-Phones?Manually configuration is not the best way to do it because there are hundreds IP-Phones in the company
Hi All,I want to check if below requests can be done on CUCM or not.1,Externsion is being logged in and FwdAll is set, the call will forward to a internal and external DN.2,Extension is being logged in and FwdAll is not set,system will playing a anno...
Hi all, Just a heads up to anyone else who encounters this error when installing device firmware cop files onto CUCM.We were upgrading the firmware on our CUCM cluster (small - consists of 1 x Publisher and 1 x Subscriber) - running 8.0.2.40000-1 I w...
I have 2 users that are utilizing extension mobility. They have 3 extensions set up in their user device profile. When they log into a 9971 only the first two extensions display. I have adjusted the 9971 phont button template to be 4 lines and 2 S...
we have a paging system connected to FXO ports on 2901 CME (version 9.1). Now we a need to use another sip-based valcom at another shop floor. How can we use the same extension on both fxo phone and sip phone?thank you for your time.
I have minimal information at this time and I realize that will be helpful in answering this question - but getting some feelers out there now while I found out some more information... Working with a client who asked if they can implement a Cisco vo...
I have a 2801 Router With CME and CUE installed on it. CUE will work as an IVR. I want to connect it to BT (PSTN, ordinary telephony network, UK) network and receive call from BT. Is there any one who can guide through step by step...like what hardw...
Having trouble accessing voicemail from remote cme All calls from cmeA to cmeB to phones works perfectlyIf person on cmeb does not answer attempt is made to go to vm dead air I can ping the cue on cmeb from cmea all used codec g711ulaw thoughts
Hello,I have two issues:1. I have a CME that had a lot of files on it and Cisco phones were registering with sccp files.I saved his flash and cleared it. now there is only the .bin file and NO sccp files.How is it possible that the phones I connect t...
actually call-flow is like VOICE GW-->CUCM-->UNITY CALL hndler (here suppose a greeting will play welcome to company Cisco.If you know the extension then dial the extension otherwise press 0 to reach to the operator.BUT I want after reaching to auto ...
I am having a hell of a time trying to get a specific DN to ring to a hunt group. I have the line group, hunt list and hunt pilot created but I simply don't understand how to tell CUCM that if someone dials a sepcific DN, IE: 4555554569 then ring th...
Hi All, I found this error when i tried to register to my CUCM 10.X :[20:50:57, 08/01/2013] TFTP error : download CTLSEP8478ACEC84D5.tlv fail[20:50:57, 08/01/2013] CTLSEP8478ACEC84D5.tlv not found in 10.10.10.99[20:50:57, 08/01/2013] ITLSEP8478ACEC84...
the clock/timezone in cli and gui are correct, however when you go to Reports>Call History in the GUI, the call times are way off. I thought maybe it was an NTP issue, as the NTP server they had was unsynced. So I made the CME router NTP Master but...
