Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, How to use more than one Publisher in the same cluster as active/active or active/ standby ? and what is the best design for this solution if possible ?
Greeting All,A very odd issue we experience each time we change the timezone for the Phones under the Date and time group which is the FXO lines for all the h323 stop working (Inbound and outbound calls) and we have to delete the gateway and re-add i...
Greetings Good people !!Can some please explain to me briefly how the phone licenses purchased after the CME installation and license agreement, are installed to support phones that didn't have a license.Here is my issue, when you order for the phone...
Hi All, please advise on this.I have a router with 4 BRI and the client require to see their own number when they dialing out instead of main number.from debug isdnq931 i see the router already send the correct number 97775882 but on the receipt it s...
Hello All,When I call from analog line to PSTN, call is going out normally.But after IVR telling me to dial extension number I can't dial. RegardsBahlul
Hello,We got two PAK's for expressway which is bundled free. When I applied one of the PAK on VCS the options changed to0 Non Traversal Calls, 0 Traversal Calls, 2500 Registrations, Encryption.Now I want to know where to apply the next PAK. I assume ...
I have about 40 phones that I had to delete, and then import a new BAT file for them with corrections. Now, none of the phones are registering. I noticed that when I imported the BAT file, CUCM already had IP addresses associated for the phones (I'm ...
Hi, Is it possible in CUCM 7.1.5 to setup call forwarding only in weekdays?Exampleif I have an IP phone and I have set up call forwarding to my cellphone after 10 rings I would like that to happen only on weekdays and call forwarding should not happe...
Hi All,I need to know if the new IP Phone 7821/41/61 can support CME 8.6 or I need to Upgrade to the latest version of CME to support that phones.If someone already did a deployment with a CP 7821 with CME 8.6 just let me know.Regards.
After installing a locale on a server, the install "Status" message says: "A reboot is not necessary for the changes to take effect." Yet the install log ominously proclaims: "WARNING: Locale changes MAY NOT BE FULLY AVAILABLE until the server has be...
Hello,Can both inbound and outbound call works for fxo connecting to pstn, running mgcp gateway?Appreciate your help. Thanks.
Hi all,we are currently starting to roll out some video enabled 9900 and 8900 phones in our network. In the past we did not use video and configured the access ports on our Catalyst 2960 switches with "auto qos voip ciscp-phone". This however creates...
Hello,I have two UCS C220 M3 servers that host CUCM, UCCX etc.The servers were built with the standard VMware 5.1 U2 ISO (VMware-VMvisor-Installer-5.1.0.update02-1483097.x86_64.iso) rather than the Cisco custom ISO (ESXi-5.1.0-1483097-custom-Cisco-5....
I have an issue setting up my RDP time. I wanted to have the start time Monday 17:00 and end time Tuesday 8:00am, and I would like to follow the similar pattern from Monday - Friday. What is the best solution for this task?
We require a setup of Hunt, on which one number will be internal call manager and other 2 will be external number.If none of the phone answer call should be redirected to voice mail i..e unity Let me know if this setup is possible, i have tested by c...
