Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Need to understand how the following functions can be achieved on a Cisco Phone: FWD PHML button is used to automatically forward your DID line into voice mail. Will the second line ring or just flash when primary line is busy? If it will ring, Can ...
Is there any documentation on configuring SIP trunks (IP) and an MGCP (ISDN) gateway on the same router?
Our campus has purchased several Cisco VT Camera II webcams, but I'm unable to download the drivers for them without a contract. The devices themselves did not come with any installation media, and they're not automatically installing on Windows 8....
Hi,We have a Cisco CUBE and have configured gigabit sub-interfaces with different IPs to terminate each of the SIP trunks from clients and service providers. As we are getting multiple SIP trunk requirements from clients/service providers,have below ...
HiNeed some help.... I've enabled the Headset Hookswitch Control on CUCM for a cisco ip phone 7945. it says it is enabled and it successfully reboots the phone. But when I check the phone Device Configuration - Media Configuarion it shows disable...
Hello, I have a very weird problem I am not able to receive calls from local exptensions but I am able to receive calls from external numbers. My phone is 7911. I trid to delete and recreate the phone again but still it the same issue. I have 400 ...
I have been having quite a bit of trouble wrapping my head around this issue. I register to ITSP and that is fine. Outgoing works ok. Incoming does not seem to work:SIP/2.0 403 Incorrect AuthenticationSIP/2.0 403 Forbidden Reason: Q.850;cause=57sip-u...
Hello Guys,I'm facing a strange issue on a SIP gateway. We received traces from our provider about calls loops. It appears, if we call the main number, this call is directly send back by the gateway to the sip provider and the loops begin. Call flow ...
Hi, I´ve configured the following translation rule set to add a leading "0" to incoming numbers, in order to have a working "Missed Calls" list.The rules are for Florida (Orlando), but i´m not sure if they are 100% correct. voice translation-rule 9 r...
Environment: CUCM 7.1.3, Skystone version 2013Skype calls goes through a pre-defined extension (operator) in CUCM. Both parties (Skype caller and Cisco extension) can converse without issues.The issue is from the same Skype call/session, the Skyp...
Hi,I have call Manager 7.1.5 . I noticed that when I call from phone (on CCM) to mobile phone, and if I reject call on mobile phone, phone (on CCM) is still having same sound in headphone (waiting user to accept call).What cause that? What option do ...
Hey Guys, Have a SIP Trunk directly to Service Provider from CUCM (no cube). Outgoing calls are working fine and we just brought an incoming number (US Number) . How do I make this work ? ThanksVR
Hi,Hope someone can shed some light and help us with an issue.We're upgrading CUCM cluster from 8.0.2.40000-1 to 9.1.2.10000-28Systems were on MCS hardware - migrated 8.0(2) successfully to VM infrastructure.Appeared to successfully upgrade Publisher...
Could anyone give me some instructions on how to setup a new MOH source for Contact Center applications?Our phones use the default Cisco provided MOH from Call Manager (v7.1.5). We don't want to change that.However when users call into our call cente...
We have a Cisco SG300-50P small business switch. which is the physical backbone for our VoIP network. Our Cisco CME/CUE router connects to one of the 1GbE ports on the switch, and all the phones are Cisco IP79xx models, connecting to the 10/100 por...
