Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is it possible to route 911 calls out a specific gateway and route all other calls out a different gateway? I am running CUCM System version: 9.0.1.10000-37.
Evening all,Where a voice gateway is being used to handle SIP-SIP calls without Call Manager or CUBE in the environment, what (if any) is the correct way to configure transcoding?With a dspfarm configured, we are finding that DSP's are being allocate...
Hello,I would like to upgrade 7941 to Sip (attached). I have used tftp32 on my Windows 7 and i have configured DHCP into my tffp with other required option. I connected my pc and 7941 to P0E switch . I tried to boot my phone and watch Tftp server in...
Several Profile c 60s are displaying this issue. During a TMS scheduled call, the endpoints connect and the confernce is 100% active. However, TMS Conference Center shows the endpoins as disconnected or calling. refresh does not solve the issue.
When I built our CallManager 8.6 enviornment, I mirroed the way our 7.3 was set up. We had set up our LDAP search space at the root of our domain. The problem is that includes all kinds of sub directories we dont want. I want to now change our LDA...
Hi All,I have c2951 sr-2 voice gateway with " VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0" T1 controller, my problem is that when I am configuring pri time slots on this controller I face thes messagenot enough DSP res...
According to the Cisco document, we chose 'Flash Cutover' to migrate the configuration and data. We also, want to install the Unity conneciton on a virtual server during the upgrade. Can I migrate the old license or I have to purchase a new license ...
Hello:hoping someone has experience with this migration and can answer this.situation:existing phones on 8.6 cluster A ,company A - moving to another cluster that is also 8.6 cluster B, company B in order to move these phones successfully onto the o...
hi all,is posible do that? i mean if some user have on active call and recieve a second call, is posible fwd to whatever DN i want? i dont talk about Call Forward and Call Pickup Settings i mean directly on my phone options
Hi, We did a password reset on one of our 3800 series router but noticed that the remote access stopped working, have we missed anything or is it config issue ? RegardsRobin Thomas
Ok, I have a weird problem that is kind of hard to fully explain. My first thought was some sort of wardialing, but I don't know. It seems as if it's using existing extensions as a starting point and is incrimenting the number from there. For exam...
Hello, All.I am testing a bulk upgrade of 7960 phones to 7965 using TAPS on CUCM 8.6.x. The 7960 phones each have a primary DN assigned to them and are currently routable. Unfortunately BAT does not seem to be playing nice..Method 1I left TAPS at the...
Hi,Guys i am not able to customizie the softkey template for 8945.I tried to change from Device-->Device Settings-->Softkey Template but no luck.Regards,IrfCisco
HiWe are using CUCM 8.0.3 , unable to find Phone type Cisco 8831 for manual registration. How can I add this phone type to CUCM ? Any help is appreciated.
Hi,I have created a OS user in cucm and it is not reflected to subscriber, is this a normal condition or abnormal, Please reply Thanks
