Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am currently deploying Cisco VoIP to a number of sites. Some of these sites currently have B1/POTs lines, some have DID & CO trunks. Is there a difference between a CO trunk and a regular land line/B1? Can you terminate a CO trunk directly on a...
Hi Guys;I did set my RP for not displaying the CallerID internal and it's work.The only problem I have is when I set my Traslation Pattern name = 7024 (for example) is working but when I replace it by 70XX it's display the extension .Did some one hav...
Hi ThereWe seem to have an issue with one of our call manager systems on 4.1The system doesnt seem to accept any calls coming from outside if the number has now cli, basically any withheld number.How do we get the system to allow this ?cheersCarl
Hello everyone,I have some users on IP communicator that had to get their device pool and device CSS changed to a different one and some users are now unable to log into CAD. Some can, some can't. IPC and Users are all set up the same on CUCM. Any...
Hi everyone,I'm working on something for our Sexual Health Information Line. I've setup an upfront Call Handler in Unity Connection 8.5 where when callers press 3 they get transferred to a public health nurse on DN 1725. The problem is that it is m...
Hi,I have following commands on my h323 gateway. On CUCM, SRST is enabled and i have given my h323 gateway and SIP port is 5060.call fallback activecall-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address 10.1.20...
My problem is I have Cisco 7937G conference station installed in offices covered with surrounding glass and board.So when we make conference calls, the called party always received the echo/underwater sound when the calling party spoke.There are t...
Hi,I have setup the following cluster:CUCM 7.1.5Cisco 3925 with (C3900-UNIVERSALK9-M), Version 15.2(3)T and uck9 technology for SRSTI have setup the SRST under CUCM to point to router aswell as added that SRST service under the device pool of the 794...
HI all,We have the following case.A client has a phone list db.He did request an application that can start reading the db - place automatic a call through cme.If the call is answered, sent the call to operator.If the call is not answered after 10 ri...
Hi Guys,From my findings on my debug voip ccapi trace, I do not see any outgoing call from POTS dialpeer to VOIP dialpeer. Can I confirm if my conclusion is correct?Currently there are 4 FXO ports with 2 ports shutdown. Incoming call from VOIP to POT...
Hi all,After sucessfully intergration of uc with cucm using sip. After making a test call from phone a to phone b . Phone a send the voice msg to phone b, but phone b has no mwi indicator & no msg notification icon also , but when I press msg but...
On Unity Connection 8.5, on the User Basics screen (the 1st one) of any given user, there is a check box for “Set for Self-enrollment at Next Sign-In”.Is there a way to get the system to tell you who still has the box checked (meaning the user has ne...
hi,i need to configure qsic trunk between ccme and pbx.i want the configuration for qsic on ccme.does any one have the configuration?how the dialpeer should be configured?
Tested this gateway before we deployed it in another town and have run into a problem One problem was inbound dialing which I corrected by battery-reversal on the FXO ports. I still have problem outbound though. I see the port go off-hook for a se...
I have a user that needs to delete all messages. In fact, he wants me to delete his mailbox and recreate it.I do not have access to the GUI, only the router.I understand that if I simply delete the user via CLI, it becomes orphaned. The problem is ...
