Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I have integration between Cisco router and Nortel PBX using E1 PRI.The gateway is H.323 and i'm trying to make the caller ID and calling name appear.I have done the configuration as follow:voice service voipqsig decodefax protocol t38 ls-redun...
Currently have h323 gw with a t1 PRi. I have added an vwic2-fxo card to the gw. configured pots dp with destination-pattern i am dialing, and added correct port statement dial peer.debug voice dialpeer shows correct dialpeer is matching, but call...
We are currently setting up remote agents with pinned up connection using Radianta. The issue arises when using Cisco Agent Desktop(CAD) we are able to transfer a call however we cannot disengage from the call. The Radianta pinned up connection ha...
Hello,I would like ti know if the are a possiblity to use Alphanumeric User ID widh extention mobilty but change the characters order so that all digit will be presented first and then alphabetic character because my user ID will have only one alphab...
Guys,I'm trying to write a normalization script that will replace the caller-id in the "From" field of an outgoing SIP invite.So from this example:From: "Geddy Lee" <sip:1000@1.0.0.1>;tag=B56D8-14AAI need to replace the "Geddy Lee" (that's right, Rus...
HiI managed to get X-lite register to UC560 but now i cannot pass whole 10 Digits as caller ID. X-Lite only sends out last 4.How can i fix this?Sending Complete Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfe...
Pardon me as I am new to this world.I just set up an SRST router in a remote office with the CM in our headquarters. Everything is working fine. I am getting an issue relayed to me that I am having diffuculty researching.Here it is:Remote employee ma...
HelloI would like to help one of you for a problem I'm having to update the firmware of a Cisco 7940 in the cucm 8.I have upgraded the files cmterm-7940-7960-1-sccp.8 2.cop.sgn, 7940-7960cmterm-sccp.8-and-a-2SR1.cop.sgn cmterm-7940-7960-SCCP. 8-1, 2S...
Can anyone tell me if certain ports are used to allow the Directory to be used on the phones? We have a situation where some users get the directory and others don't. Thanks in advance! All replies rated.
Is it possible to configure a backup session target on a CUBE? It doesn't look like it, so how do you configure a backup trunk for termination?
Hello everyone,A design question. In a centralized CM environment with several remote sites around 20-100 users each but Remote Site D had about 500 users and not on VoIP yet. The plan is to have a dedicated circuit (T1 maybe) from the large remote...
I have a customer site where we have a VG224 providing analogue ports for fax machines/franking machines and modems. All using G.711 passthrough direct to the PSTN gateway.Fax machines work no problem. Franking machine works no problem. Outbound mode...
Hello,I wanted to know if anyone has step-by-step directions on how to setup Meet-Me Number/Pattern on Cisco Callmanager 7.1.5.Thank you
Does anyone know if it's possible to implement or emulate Client matter code feature in CME 8.6? specifically, after caller dials long distance number, we want them to enter a client matter code (CMC). This is just for compatibility with the old sy...
Hi, I'm tried to register a 8941 phone to CUCM version 7.1(5).Have already uploaded the firmware and device enabler, as following:cmterm-894x-sccp.9-2-3-5.copcmterm-894x-qed.9-2-2-0.copcmterm-894x-sip.9-2-3-5.copAnd did a cluster reboot after that.No...
