Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hey guys any issues with this design?Cucm 8.6 pub, presence, UC & Uccx in country A.Cucm 8.6 sub and seperate Uccx in country B.Mpls link with 55ms latency between sites.Plan is run 2 seperate Uccx servers.Point Uccx and agents/phones to sub in count...
HiI'm after MTBF data on the following phones:7906G7960G7911G7942GThe previous post on this topic (many years ago now) didn't have an answer that provided the required data.RegardsTaniel
Hi,Currently, I have a cluster of CUCM version 7.1 and now I have purchased two new MCS server to install the CUCM version 8.5.My question is: How is the procedure to export the configuration of the Cluster 7.1 and import this configuration into the ...
Output decoder doesn't help: Cisco has basically removed that feature System was restarted by address error at PC 0x6C4510C, address 0x1CF at 07:18:19 AKT Thu Dec 29 2011C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)Te...
Guys,I've been asked to bring a site up that, over the next 4-5 months, will handle a fairly heavy call volume. Is there any way I can limit the amount of concurrent calls to one DN? I don't want their number to overwhelm the rest of the system. Th...
Hi guys! Ive received the upgrade kit for CUCM 8.5 with part number CM8.5-K9-UPG= CUCM 8.5 Upgrade for PUT only. There is an upgrade DVD, an installation DVD. Does the installation DVD is for a full version install? The situation is the followin...
Before we upgraded to 8.6 when Phone A called Phone B and RNA, the call rolled to a hunt group , the members of that hunt group saw "From Phone A For Phone B" now it show From Phone A for 1000" 1000 is the Hunt Group Pilot number.Any thoughts on how...
Hi:I have 2 CME in remote sites and I can't place a call between them, when I use codec g711ulaw the call is sucessful but with codec g729r8 not permit the call. The call disconnect cause is: Last Disconnect Cause is "41 ", Last Disconnect Text is "...
Now that the Fast Dials and Personal address book have moved under the Directories --> Personal Directory button is there a way to get to them directly or create a new service to allow 1 button access to fast dials/pab on a services url button?We're ...
Ok, so we're finishing up our 8.5 installWe were on 4.1 previously, running attendant console (free)Looks like cisco nixed attendant console, and is moving onto the Unified Attendant Console (must pay)There are 3 versionsDepartmental (150 phones max,...
Hello,What is the best way to configure a call pickup for this scenario.Phone A, B and C are part of a customer service group. Phone D is the operator who sits in the same room.Phones A, B and C would like to have the ability to pickup calls ring to...
Hello!I need some help in understanding of troubleI have the next system : CUCM + 2911 as PSTN gatewayI installed h323 gateway on 2911 and entered its parameters in CUCMtoday I've got a task to insert H323 phone in my system.I've made all the setting...
After upgrade CER from 7.1.1.3 to 8.5, I cannot login to the CER Admin webpageThe Cisco IDS service is stopped and cannot be started.When I rolled back version to 7.1.1.3 Cisco IDS starts, but it continues failing on 8.5. The only pages available are...
I posted this in the SB section but there seems to be more action over here. I'm having a problem where people are checking their voicemail and sometimes it'snot accepting their PIN from the Cisco phone. I've had people try a number of times without...
Hi there,I am configuring E1 controller and get the following error:(config)#controller E1 0/2/0(config-controller)# framing NO-CRC4 (config-controller)# line-termination 75-ohm(config-controller)# ds0-group 0 timeslots 1-10 type r2-digital r2-compel...
